Saturn LW1 Parts

Anchor 3032 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2000-2004
• Weight approx: 3 Lbs

AT PRESS SW MANIFOLD

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

REUSABLE AT PAN GSKT

AT SEAL DRIVE AXLE

Vehicle Speed Sensor

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
• Good dry heat resistance
• Excellent low temperature capability
• Delivers quality and reliable performance for every type of repair

Product Features:

• Design type: springless; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Imperial Econo-Kool tube and fin transmission cooler
• Size: 3/4″ x 5″ x 15-7/8″
• Compact and mid-size cars
• GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
• A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
• Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
• The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

On certain GM vehicles, when an original equipment transmission pan is Leaking in need of routine service, loosening and lowering that fluid-filled pan is a messy business. This Dorman OE FIX transmission oil pan is designed to match the performance of the original equipment pan but features a convenient drain plug to allow the transmission fluid to be removed before service. This steel pan is also upgraded with an E-coat finish for excellent resistance to corrosion, and includes a filter assembly, gasket and integrated magnet for a complete repair solution.

Product Features:

• Service-friendly – this transmission fluid pan for specified vehicles features an integrated drain plug to allow the trans fluid to be drained before servicing the pan, eliminating messy spills
• Durable design – constructed to strict specifications and protected with an E-coat finish, this upgraded pan is engineered to withstand corrosion, impacts and leaks for long and reliable service life
• Complete solution – includes pan with integrated magnet, filter assembly and gasket for a hassle-free, professional repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

AT MASTER REPAIR KIT

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

• Meets or exceeds OE specifications

Shift Solenoid

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
• Made of high grade nylon for easy installation
• Removable buttons for cooler/fan relocation
• Made for both transmission coolers and electric fan installation
• Comes with Quick Connect coupler

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Delivers quality and reliable performance for every type of repair

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

This Dorman Automatic Transmission Oil Cooler Gasket eliminates leaks where the oil cooler line connects to the transmission. Gasket may break down over time, causing leaks, and should be replaced any time the oil cooler line and transmission are separated.

Product Features:

• Durable construction – rubber over steel construction creates a positive seal and retains its shape
• Direct replacement – fits and functions like original equipment
• Easy to install – direct-fit, no special tools required
• Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

• FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
• Universal Fit
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
• 133dB @ 4″, 12V

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For A Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive
• Backed By A Limited Lifetime Warranty

The WeatherTech All Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub zero weather. Our All Weather Floor Mats also have anti skid ridges to prevent shifting in your vehicle and come with a protective, non stick finish to make cleanup quick and easy. WeatherTech All Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:

• Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
• They Won t Curl, Crack Or Harden In Sub Zero Weather
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat

The WeatherTech All Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub zero weather. Our All Weather Floor Mats also have anti skid ridges to prevent shifting in your vehicle and come with a protective, non stick finish to make cleanup quick and easy. WeatherTech All Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

• Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
• Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

ACDelco Professional Temperature Control Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

The Am-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

• Features corrosion resistant steel housing and universal mounting bracket.
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
• Available in high and low tone
• 125 @ 4″, 12V

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Product Features:

• Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
• High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
• Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
• Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components.

Product Features:

• Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

ENG TMNG CRANKSPRCKT

ENGINE TIMING SET

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
• QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
• ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
• INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
• COVERAGE – Available for domestic and foreign nameplate vehicles

Product Features:

• Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
• Insignificant shrinkage and loss of mass even in high-heat environments
• Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
• Sealing gap 0.006 in (0.15 mm)

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
• UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
• MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
• SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Fixing a sheared engine timing chain guide bolt with original equipment typically requires a labor-intensive removal procedure. This Dorman OE FIX innovation saves hours by integrating the bolt and plug for an easy repair on GM Ecotec engines.

Product Features:

• Innovative fix – this engine timing chain guide bolt allows for simple replacement of a sheared original bolt
• Saves hours – reduces repair time dramatically by eliminating need for head removal, drilling and tapping
• Integrated design – plug and bolt combined as one piece to easily restore functionality
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Carquest crankshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest crankshaft position sensors are a cost-effective solution for your engine management repair. Carquest crankshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Long service life and durable performance
• 100% tested for proper performance
• O-rings and seals are included if required
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

ENG BAL SHFT CHN TNS

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-4201 Engine Timing Chain (1 EA), 9-4202 Engine Balance Shaft Chain (1 EA), 9-5375 Engine Timing Chain Tensioner Guide (1 EA), 9-5381 Engine Timing Chain Guide (1 EA), 9-5382 Engine Timing Chain Guide (1 EA), 9-5383 Engine Balance Shaft Chain Tensioner (1 EA), 9-5384 Engine Balance Shaft Chain Guide (1 EA), 9-5385 Engine Balance Shaft Chain Guide (1 EA), 9-5386 Engine Balance Shaft Chain Guide (1 EA), 9-5467 Engine Timing Gear Oiler (1 EA), 9-5481 Engine Timing Chain Tensioner (1 EA), 9-5496 Engine Timing Camshaft Gear Bolt (2 EA), S849 Engine Timing Crankshaft Sprocket (1 EA), S850T Engine Timing Camshaft Sprocket (2 EA), S851 Engine Timing Crankshaft Sprocket (1 EA), S853 Engine Balance Shaft Sprocket (1 EA), S855 Engine Balance Shaft Sprocket (1 EA), WP100 Engine Water Pump (1 EA).

Product Features:

• Timing Chain Kits with Water Pump includes all components for a quick and efficient replacement
• Utilizes the latest in design and technology to offer a complete chain kit solution
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• CAD designed and manufactured using premium materials
• Refer to our online catalog for detailed application-specific information

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

• Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
• Durable construction – stringent specifications and careful construction help ensure longevity
• Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Anchor 3022 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2000-2003
• Weight approx: 3 Lbs
• Hydraulic

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

• Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
• Components are manufactured from high quality materials for durable wear
• Components are precision engineered for optimum fit and function
• Designed for long-life and worry-free performance

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
• Validated for fit, form and function
• Unsurpassed quality you can trust

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: springless; multi-lip
• Temperature range: -100 Deg. F to 450 Deg. F / -73 Deg. C to 232 Deg.
• Excellent dry running capabilities
• Low coefficient of friction
• Delivers quality and reliable performance for every type of repair

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Size: 3/4 in. x 10 in. x 12-1/4 in.
• Medium duty applications
• All except Chevrolet V8 applications
• Two-pass design for increased cooling
• Size: 3/4 in. x 10 in. x 12-1/4 in.
• Medium duty applications
• All except Chevrolet V8 applications
• Two-pass design for increased cooling

This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
• Complete assembly – includes replacement pan and drain plugs to match original components
• Durable design – high-strength coating prevents future corrosion
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A balance shaft chain guide serves as a guide (or track) for the balance shaft chain ensuring proper alignment and balance shaft timing. Cloyes balance shaft chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component.

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function