Saab 900 Exhaust Parts
Top Saab 900 Exhaust Parts Categories
We carry over 41 Exhaust Parts in inventory for the Saab 900. If you’re looking for aftermarket Exhaust Parts for your Saab 900, check out all these categories:
Essential Saab 900 Exhaust Parts
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – Exhaust Pipe Flange Gasket (Part No.31309)
from
$3.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust System Hanger Insulator (Part No.255-627)
from
$3.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers-designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
BRExhaust – Exhaust System Hanger Insulator (Part No.255-721)
from
$4.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers-designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Walker – Exhaust System Hanger Insulator (Part No.35728)
from
$6.29
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe 2.75" Inlet (OD) 2.75" Outlet (OD) (Part No.53058)
from
$147.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
BRExhaust – Exhaust Pipe (Part No.767-831)
from
$142.99
BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.
Product Features:
See More
Product Features:
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Precise fitment
- Hassle-free installation and functionality verified by comprehensive testing procedures
- Easy installation
- Direct-fit exhaust system component that saves installation time
Walker – Direct Fit Exhaust Resonator and Pipe Assembly – 2.625" Inlet (ID) (Part No.45669)
from
$152.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-35269-00)
from
$11.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Clamp (Part No.250-050)
from
$4.99
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards. To ensure a gas-tight connection and a secure suspension, we always recommend the replacement of the mounting parts when fitting a new exhaust.
Product Features:
See More
Product Features:
- BRExhaust also develops the installation hardware to the same standards.
BRExhaust – Exhaust Clamp (Part No.254-701)
from
$11.29
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards. To ensure a gas-tight connection and a secure suspension, we always recommend the replacement of the mounting parts when fitting a new exhaust.
Product Features:
See More
Product Features:
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Walker – Exhaust Clamp (Part No.35344)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Clamp (Part No.250-265)
from
$30.99
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards. To ensure a gas-tight connection and a secure suspension, we always recommend the replacement of the mounting parts when fitting a new exhaust.
Product Features:
See More
Product Features:
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-15775-00)
from
$9.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
BRExhaust – Exhaust Pipe Flange Gasket (Part No.256-282)
from
$6.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
MagnaFlow – Universal HM Grade Federal / EPA Compliant Catalytic Converter (Part No.99206HM)
from
$179.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Compact, lightweight construction enables installation in confined areas, welding is required
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.3322305)
from
$561.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322305. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
Walker – CalCat CARB Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.81127)
from
$464.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
Walker – CalCat Universal Catalytic Converter (Part No.82530)
from
$387.99
Walker an industry leader for import And domestic applications, offers Walker CalCat Universal Catalytic Converters, available for OBDII (1996 And newer) vehicles And Pre-OBD (1995 And older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker CalCat Catalytic Converters are legal for sale in the state of California, And any state complying with California regulations.
Product Features:
See More
Product Features:
- CARB COMPLIANT : For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY : Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE : Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE : Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION : Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – Universal OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51205)
from
$194.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
Walker – Standard EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.15052)
from
$171.99
Product Features:
See More
- EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
Walker – CalCat CARB Universal Catalytic Converter, 2.25" Inlet (ID) 2.25"Outlet (ID) (Part No.81302)
from
$494.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment. May require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s emissionsáandástructural integrity warranty.áVisit Walkerexhaust.com for details
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.3322304)
from
$561.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322304. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Durable 308 stainless steel MIG welds
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.418035)
from
$451.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 418035. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Saab 900 Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Saab 900
You love your 900. So we’ve made it easier than ever to help you find Saab 900 Exhaust Parts in our online catalog. Our inventory holds 41 aftermarket and OEM Exhaust Parts for your Saab 900, ranging from $2.99 to $718.99.
We offer parts from 6 brands trusted to make quality Exhaust Parts for your Saab 900. Before you buy, take some time to read through customer reviews. We currently have 399 reviews of Saab 900 Exhaust Parts from previous customers. Some of the top rated parts include Terminator; Exhaust Tips with 4.0 stars and Standard EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) with 5.0 stars.
Find your 900 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Saab 900 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Saab 900
Our inventory holds Exhaust Parts for your Saab 900 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, BRExhaust, and MagnaFlow, all of which can keep that Saab happy.
We have MagnaFlow parts available for your Saab 900 in categories like Catalytic Converters. Some of the top-rated MagnaFlow parts in these categories are:
from
$99.99
(1)
Universal Standard Grade Federal / EPA Compliant Catalytic Converter
Catalytic Converters
from
$179.99
(5)
Universal HM Grade Federal / EPA Compliant Catalytic Converter
Catalytic Converters
FAQs for Saab 900 Exhaust Parts
What are the most purchased Exhaust Parts for the Saab 900?
Out of 41 Exhaust Parts for the Saab 900, the most popular in our inventory are:
What are the top-rated Saab 900 Exhaust Parts?
Top-rated Exhaust Parts for your Saab 900 based on customer reviews/ratings are:
from
$171.99
(1)
Standard EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID)
“Nice Cat. I don’t know what else to say. It fits and it works. Two thumbs up!”
from
$197.99
(1)
Ultra EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID)
“This is very difficult to install. You must be a great welder ect.”
