Saab 9-3 Wheels and Tires
Top Saab 9-3 Wheels and Tires Categories
We carry over 39 Wheels and Tires in inventory for the Saab 9-3. If you’re looking for aftermarket Wheels and Tires for your Saab 9-3, check out all these categories:
Essential Saab 9-3 Wheels and Tires
Schrader – Green Plastic (Short) Cap – 100 Pack (Part No.20795-100)
from
$19.99
Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader¿s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader¿s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.
Product Features:
See More
Product Features:
- Cap designed to fit standard valve stem
- Cap contains rubber o-ring to provide sealing and prevent moisture and contamination from entering the valve
- Cap designed to OE standards
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Driveworks – Wheel Hub (Part No.930-100)
from
$43.99
Driveworks Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Driveworks Wheel Hubs.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
Xtra Seal – Tpms Service Kit For Volvo (Part No.17-20010AK)
from
$27.49
Tpms Service Kit For Volvo
Autel – MX-Sensor Component Kit (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-SensorM: TPMS Sensors With Metal Valve Stems, Bulk Box (20-Pack) (Part No.300060)
from
$579.99
The MX-Sensor 1-SensorM Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-SensorM features a combined frequency of 315MHz & 433MHz with metal valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-SensorM is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve.
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)
from
$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.
Product Features:
See More
Product Features:
- Includes 4 Rubber Press-in Valve Stems
- Compatible with Autel 1-Sensors
- Compatible with Autel 315MHz & 433MHz MX-Sensors
- Warranty on Material and Workmanship
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-4)
from
$13.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.A-4)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Schrader – TPMS Service Pk 20018 (Schrader Snap-In Valve Assembly) (Part No.20018)
from
$5.99
Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. . All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- Each kit includes a fully assembled Schrader rubber valve assembly and mounting screw
- Valve cores are designed to OE specifications
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention
Schrader – TPMS Service Kit 34000 (Schrader Alum Valve Assembly) (Part No.34000)
from
$6.99
Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- Replacement components in Schrader TPMS service kits are sensor specific
- The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack (Part No.712-301)
from
$16.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510052)
from
$41.99
Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
KAI – Reconditioned OEM Aluminum Alloy Wheel, 16 X 6.5, 14 Spokes, 5 Lug, Silver (Part No.ALYSB030U20)
from
$266.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 16 X 6.5, 14 Spokes, 5 Lug, 110MM Bolt Pattern, Silver. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle. Warranty: 5 Year, Limited.
Product Features:
See More
Product Features:
- 16 X 6.5, 14 Spokes, 5 Lug, 110MM Bolt Pattern, Silver, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Lug Nuts And Center Cap Not Included
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Wheel Bearing Retaining Ring (Part No.933-100)
from
$9.99
This wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications
- Restores functionality – this retaining ring is made to fit and fully restore part functionality after the original ring fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Autel – Black Metal Press-in Valve for 1-Sensor (Part No.CV-001)
from
$5.49
The CV-001 is a black metal press-in valve stem for the 1-Sensor.
Product Features:
See More
Product Features:
- Black Metal Press-in Valve Stem
- Compatible with Autel 1-Sensor
Autel – Adjustable Angle MX-Sensor 1-Sensor (Rubber) (Part No.300020)
from
$34.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Tire Pressure Monitoring System (TPMS) Sensor (Part No.UVS7051)
from
$42.99
Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).
Product Features:
See More
Product Features:
- Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Reprogrammable and Copy Clone Capable
- Full WAL and PAL technology support for auto-locate.
- Rubber valve included.
Schrader – TPMS Sensor – Clamp-In Aluminum Valve (Part No.20159)
from
$93.99
Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Product Features:
See More
Product Features:
- OE fit, form and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Quick and easy installation that does not require programming
- OE fit, form and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and year
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and yeará
- Quick and easy installation that does not require programming
- Premium quality TPMS sensors produced in Schrader¿s secure and highly automated OE manufacturing facilities
- Premium quality TPMS sensors produced in Schrader┐s secure and highly automated OE manufacturing facilities
Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 4 Pack (Part No.33700-4)
from
$138.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com.
Product Features:
See More
Product Features:
- EZ-sensor must be programmed to specific M/M/Y vehicle.
- EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
- EZ-sensor can be programmed by most all TPMS programming tools on the Market
- Supports 314.9, 315 and 433 MHz sensor applications
- Always keep your TPMS scan and programming tool up to date with the latest software
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Aluminum valve can be replaced by Schrader service kit 20049
- Nut Torque = 71 in-lbs
- Valve Core Torque = 3.5 in-lbs
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Silver (sold by each) (Part No.610-367)
from
$3.69
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Saab 9-3 Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your Saab 9-3
You love your 9-3. So we’ve made it easier than ever to help you find Saab 9-3 Wheels and Tires in our online catalog. Our inventory holds 39 aftermarket and OEM Wheels and Tires for your Saab 9-3, ranging from $2.99 to $7,323.00.
We offer parts from 9 brands trusted to make quality Wheels and Tires for your Saab 9-3. Before you buy, take some time to read through customer reviews. We currently have 2,085 reviews of Saab 9-3 Wheels and Tires from previous customers. Some of the top rated parts include Multi-Purpose Bearing with 5.0 stars and Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. with 1.0 stars.
Find your 9-3 Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Saab 9-3 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your Saab 9-3
Our inventory holds Wheels and Tires for your Saab 9-3 from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Autel, Schrader, and National, all of which can keep that Saab happy.
We have Driveworks parts available for your Saab 9-3 in categories like Wheel Bearings. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Schrader Wheels and Tires
Leading Schrader Wheels and Tires
We carry Schrader brand parts for your Saab 9-3 across several catalog categories, including TPMS Sensors and TPMS Sensor Kits. Some of our most reviewed Schrader parts include:
from
$5.99
(4)
TPMS Service Pk 20018 (Schrader Snap-In Valve Assembly)
TPMS Programmable Sensor Service Kits
FAQs for Saab 9-3 Wheels and Tires
What are the most purchased Wheels and Tires for the Saab 9-3?
Out of 39 Wheels and Tires for the Saab 9-3, the most popular in our inventory are:
from
$44.99
This product is not rated
MX-Sensor 1-Sensor with Press-in Rubber Valve Stem and Combined Frequency
Tire Pressure Sensors
from
$55.99
This product is not rated
EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 1 Sensor
Tire Pressure Sensors
from
$11.49
This product is not rated
Box of 4 Metal Press-in Valve Stems for 1-Sensor
Remote Tire Pressure Sensors
What are the top-rated Saab 9-3 Wheels and Tires?
Top-rated Wheels and Tires for your Saab 9-3 based on customer reviews/ratings are:
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
