Renault R5 Parts

Renault R5 Wheels and Tires

Beck/Arnley – Wheel Bearing (Part No.051-3809)

Wheel Bearing

from

$26.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • ABS magnet included if applicable
  • Made with high quality materials
  • Quality construction for durability
  • Application specific for this vehicle
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-30205)

Wheel Bearing: Direct Fit, 1 Piece

from

$13.29
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-30204)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Renault R5 Engine Parts

Victor Reinz – Engine Crankshaft Seal (Part No.81-15287-30)

Engine Crankshaft Seal

from

$17.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

FAG US – SHAFT SEAL (Part No.SS3346)

SHAFT SEAL

from

$32.99
SHAFT SEAL

National – Shaft Repair Sleeve (Part No.99146)

Shaft Repair Sleeve

from

$28.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99114)

Shaft Repair Sleeve

from

$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Multi Purpose Seal (Part No.223010)

Multi Purpose Seal

from

$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.228010)

Multi Purpose Seal

from

$22.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Beck/Arnley – Rear Crankshaft Seal (Part No.052-1112)

Rear Crankshaft Seal

from

$24.59
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber designed to keep water and dirt out
  • Quality construction for fitment
  • Designed for under vehicle environment
  • Application specific for this vehicle
See More

National – Multi Purpose Seal (Part No.3771)

Multi Purpose Seal

from

$14.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99315)

Shaft Repair Sleeve

from

$49.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Renault R5 Exhaust Parts

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.53003)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$97.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53003 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15050)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$128.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • Product might not be available in all states due to local laws.
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Search Over 139 Renault R5 Parts Online for Delivery or Pick Up

Looking for the best Renault R5 aftermarket replacement parts? Replacing worn and broken parts on your Renault R5? Check out our online catalog to find the best selection of aftermarket Renault R5 parts as well as real user reviews on Renault R5 replacement parts. Make an informed decision about every component you add to your R5.

At Advance Auto, we’ve got you covered when it comes to getting your Renault R5 in tip top condition. We’ve got over 139 Renault R5 parts to choose from in popular categories like Automotive Accessories, Wheels and Tires and Transmission Parts. If you’re looking for the best prices, try searching our Renault R5 parts catalog to compare OEM and aftermarket parts for your Renault R5.

Whether you need Renault R5 body parts, interior components, or custom Renault R5 parts you can find them online at Advance Auto. Want to order your Engine Parts online? Or maybe you need your Renault Exhaust Parts same day? No problem, you can pick up R5 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Renault R5 parts has never been easier.