Ram ProMaster 3500 Shocks and Struts

The Monroe® Magnum® shock absorber for class 3-6 vehicles is gas-charged for quicker response and a stable, more comfortable ride. Designed to handle the demands of high mileage and severe use vehicles, replace worn-out units with Magnum® shocks to help reduce excessive vibration.

Product Features:

• FOR HARDWORKING COMMERCIAL VEHICLES   — Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
• FOR HARDWORKING COMMERCIAL VEHICLES áá– Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
• CONSISTENT RIDE — All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while 2-in. or 2-1/4-in. reserve tube holds more fluid to improve performance (when required)
• EXCEPTIONAL HANDLING — 10-Stage valving, tuned specifically to each vehicle, adjusts to road extremes while the larger 1-3/8-in. bore provides more efficient damping control to provide consistency and a smooth ride (most applications)
• STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360 Deg. for durability
• BUILT TO LAST — Robust hydraulic lock-out prevents over extension of air bags, top-out of the piston and averts damage to seal assembly (on most applications)
• LONGER SERVICE LIFE — Bearing with PTFE coating reduces friction between rod and rod guide combined with nitrocarburized piston rod provides durability and longer service life (most applications)
• REDUCED NOISE, VIBRATION AND HARSHNESS — Delivers exceptional control and isolates impact-related noise, vibration, and harshness under most driving conditions
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• BUY WITH CONFIDENCE — Comes with Monroe’s 90-day Risk Free Ride Offer and Limited Commercial Warranty
• All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction

The ultimate air spring a new air spring kit exclusively from air lift. Load Lifter 5000 ultimate adjustable air spring kits feature all of the benefits of our heaviest rated air spring with the addition of an internal jounce bumper inside the spring for the ultimate in ride comfort. An air lift exclusive product fits vehicles with in-bed hitches. tow and haul the heaviest loads with safety and comfort with Load Lifter 5000 ultimate. Works with vehicles leaf springs to provide up to 5,000 Pounds of front load leveling capacity and keeps the vehicle riding stable, level and comfortable whether loaded or unloaded. Fully adjustable from 5 to 100 PSI. The closed-cell urethane foam jounce bumper inside the ultimate air springs provide a cushion of air that absorbs shock, eliminates harsh jarring on rough roads and protects vehicles carrying heavy loads. Never bottom out again with the ultimate Load Lifter 5000 ultimate air springs are maintenance free Safely run with zero air pressure because of the internal jounce bumper. Replaces factory jounce bumper that is sometimes removed when adding air springs. Load Lifter 5000 ultimate air springs are maintenance free Safely run with zero air pressure because of the internal jounce bumper. Replaces factory jounce bumper that is sometimes removed when adding air springs. Includes industry-exclusive 60 day no questions money back guarantee Includes the most comprehensive warranty in the industry – covers all kit contents including brackets, fittings and air line. The kit includes 2 air springs, brackets, air lines, Schrader valve and all of the hardware needed for installation. Includes fully illustrated instruction manual.

Product Features:

• Up To 5000 Pounds Of Load Leveling Capacity
• Closed-Cell Urethane Foam Provides A Cushion Of Air That Absorbs Shocks And Protects Vehicles With Heavy Loads
• Exclusive Jounce Bumper Inside – Eliminates Harsh Jarring On Rough Roads, Provides Three-Stage Ride Comfort, Safely Run With Zero Air Pressure
• End Caps Are Made Of An Ultra High-Strength Nylon Composite Which Is As Strong As Steel, But Weighs Less And Is Corrosion Proof
• Air Springs Are Built Like A Tire And Are Reinforced By Durable, 2-Ply Fabric For Maximum Strength
• Exclusive Upper And Lower Roll Plates Included. Protect The Springs From Sharp Edges, Such As Brackets Or The Frame. They Increase Load Capacity Up To 10 Percent
• Includes 2 Air Springs, Brackets, Air Lines, Schrader Valve And All Of The Hardware Needed For Installation. Easily Installed In 2 Hours Or Less
• Refer To The Document Tab For The New Authorized Installer Program

Engineered for hardworking emergency, municipal, fleet and jobsite vehicles, Monroe Magnum Severe Service struts feature enhanced components for added control and long service life in the toughest environments.

Product Features:

• ENGINEERED FOR EMERGENCY AND FLEET VEHICLES – For hardworking first responder, municipal, fleet and jobsite vehicles and features 10-stage valving that adjusts to road extremes to help handle frequent stops, heavy loads and high miles
• IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• BUILT TO LAST – Heavy-duty chrome rod and PTFE-banded piston enhance durability for longer service life while PTFE-coated bearing reduces friction between rod and guide
• CONTROL AND DURABILITY – PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
• CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• 1-3/8-inch (35 mm) bore: Larger bore than most shocks to provide more efficient and consistent control – on most applications
• 10-stage valving: Reacts to wide range of driving conditions – on most applications
• All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
• .05-inch pressure tube withstanding pressure of 9KPSI – On most applications

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets (where applicable)
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod