Ram 4500 Wheels and Tires
Top Ram 4500 Wheels and Tires Categories
We carry over 52 Wheels and Tires in inventory for the Ram 4500. If you’re looking for aftermarket Wheels and Tires for your Ram 4500, check out all these categories:
Essential Ram 4500 Wheels and Tires
Autel – Adjustable Angle MX-Sensor 1-Sensor (Rubber) (Part No.300020)
from
$34.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 4 Pack (Part No.33700-4)
from
$138.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com.
Product Features:
See More
Product Features:
- EZ-sensor must be programmed to specific M/M/Y vehicle.
- EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
- EZ-sensor can be programmed by most all TPMS programming tools on the Market
- Supports 314.9, 315 and 433 MHz sensor applications
- Always keep your TPMS scan and programming tool up to date with the latest software
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Aluminum valve can be replaced by Schrader service kit 20049
- Nut Torque = 71 in-lbs
- Valve Core Torque = 3.5 in-lbs
National – Bearing Race (Part No.33462)
from
$34.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.39412)
from
$28.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)
from
$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.
Product Features:
See More
Product Features:
- Includes 4 Rubber Press-in Valve Stems
- Compatible with Autel 1-Sensors
- Compatible with Autel 315MHz & 433MHz MX-Sensors
- Warranty on Material and Workmanship
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Xtra Seal – Tpms Snap In Valve – Ford (Part No.17-20018)
from
$6.99
Tpms Snap In Valve – Ford
Schaeffler – Shaft Seal (Part No.SS3374)
from
$66.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
National – Multi Purpose Seal (Part No.710454)
from
$48.49
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Dorman – Wheel Lug Nut: 9/16-18 Thread, Flanged, 1.125" L, Black Oxide (Sold by each) (Part No.611-296)
from
$13.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: 9/16-18 Thread, Flanged, 1.125" Length, Black, 1 Pack (Part No.611-296.1)
from
$14.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)
from
$601.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- EZ-sensor must be programmed to specific M/M/Y vehicle
- EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
- EZ-sensor can be programmed by most all TPMS programming tools on the Market
- Supports 314.9, 315 and 433 MHz sensor applications
- Always keep your TPMS scan and programming tool up to date with the latest software
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
MOOG Hub Assemblies – Wheel Bearing & Hub Assembly (Part No.515102)
from
$339.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly (Part No.515218)
from
$389.99
Product Features:
See More
- GRIME DEFENSE OUTBOARD SEAL- Revolutionary seal helps prevent water, dirt and road grime from building up on assembly exterior and shields bearings from friction- and corrosion-causing moisture and grime
- RELIABLE PERFORMANCE – Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear (where applicable)
- EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
- CORROSION PROTECTION – Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Dorman – Steel Wheel, 19.5" x 6" (Part No.939-163)
from
$369.99
This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models
- Cost-effective solution – offers original equipment quality and appearance for a competitive price
- Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
- Trustworthy quality – backed by team of designers and engineers in the United States
Dorman – Serrated Wheel Stud M14-1.50 – 15.85mm Knurl, 87mm Under Head Length (Sold by each) (Part No.610-786)
from
$50.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Wheel Stud: Serrated, 9/16-18 Thread Size, Right Hand Thread, 10 Pack (Part No.610-613)
from
$136.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each (Part No.VS-925A)
from
$8.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatiblity
- 200 PSI maximum cold inflation pressure
Dill Air Control – Tpms Valve (Part No.VS-35)
from
$14.99
O-ring valve stem for RAM dually w/ OE Alloy wheels (45 degree angle)
Product Features:
See More
Product Features:
- Rim Hole Compatibility: 0.390″
- Max Cold Inflation Pressure: 200psi
- 200 PSI maximum cold inflation pressure
Schrader – Green Plastic (Long) Valve Cap – 100Pk (Part No.20695-100)
from
$32.99
Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
Product Features:
See More
Product Features:
- Cap designed to fit standard valve stem
- Cap contains rubber o-ring to provide sealing and prevent moisture and contamination from entering the valve
- Cap designed to OE standards
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schaeffler – Cone (Part No.K39250)
from
$36.49
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
National – Multi-Purpose Bearing (Part No.109)
from
$44.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.309)
from
$73.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Tapered Roller Bearing Cone (Part No.39250)
from
$47.99
Product Features:
See More
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Tapered Roller Bearing Cone (Part No.33281)
from
$62.99
Product Features:
See More
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Ram 4500 Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your Ram 4500
You love your 4500. So we’ve made it easier than ever to help you find Ram 4500 Wheels and Tires in our online catalog. Our inventory holds 52 aftermarket and OEM Wheels and Tires for your Ram 4500, ranging from $4.99 to $7,323.00.
We offer parts from 10 brands trusted to make quality Wheels and Tires for your Ram 4500. Before you buy, take some time to read through customer reviews. We currently have 364 reviews of Ram 4500 Wheels and Tires from previous customers. Some of the top rated parts include Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each with 4.7 stars and Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. with 1.0 stars.
Find your 4500 Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ram 4500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your Ram 4500
Our inventory holds Wheels and Tires for your Ram 4500 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Autel, Schrader, and Dill Air Control, all of which can keep that Ram happy.
We have National parts available for your Ram 4500 in categories like Wheel Bearings. Some of the top-rated National parts in these categories are:
Top-Rated Schrader Wheels and Tires
Leading Schrader Wheels and Tires
We carry Schrader brand parts for your Ram 4500 across several catalog categories, including TPMS Sensors. Some of our most reviewed Schrader parts include:
FAQs for Ram 4500 Wheels and Tires
What are the most purchased Wheels and Tires for the Ram 4500?
Out of 52 Wheels and Tires for the Ram 4500, the most popular in our inventory are:
from
$44.99
This product is not rated
MX-Sensor 1-Sensor with Press-in Rubber Valve Stem and Combined Frequency
Tire Pressure Sensors
from
$55.99
This product is not rated
EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 1 Sensor
Tire Pressure Sensors
from
$11.49
This product is not rated
Box of 4 Metal Press-in Valve Stems for 1-Sensor
Remote Tire Pressure Sensors
What are the top-rated Ram 4500 Wheels and Tires?
Top-rated Wheels and Tires for your Ram 4500 based on customer reviews/ratings are:
from
$8.99
(3)
Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each
“Used to replace the rubber valves that came with the tpms sensor”
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
