Ram 4500 Belts and Hoses
Top Ram 4500 Belts and Hoses Categories
We carry over 51 Belts and Hoses in inventory for the Ram 4500. If you’re looking for aftermarket Belts and Hoses for your Ram 4500, check out all these categories:
Essential Ram 4500 Belts and Hoses
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 1/2 Inch Length (Part No.87725)
from
$11.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 15 1/2 Inch Length (Part No.86121)
from
$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dorman – Coolant Bottle Reservoir Hose (Part No.626-823)
from
$60.99
This engine coolant reservoir hose is designed to match the function of the original hose connecting the radiator or engine to the reservoir on specified vehicles. It is engineered to help ensure proper coolant flow to and from the coolant system..
Product Features:
See More
Product Features:
- Direct replacement – is designed to match the fit and function of the original hose connecting the radiator or engine to the coolant bottle on specified vehicle makes, models and years.
- Ideal solution – engineered to help ensure proper coolant flow to and from the coolant system when the original hose is leaking or has failed from heat and coolant exposure
- Durable construction – made of quality materials for reliable performance and long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter (Part No.419-725)
from
$18.79
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
- Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 125.5 mm Diameter (Part No.419-685)
from
$86.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
- Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.81" Diameter (Part No.D72905)
from
$32.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
ContiTech – Radiator Hose (Part No.G2000538869CON)
from
$46.05
Radiator Hose
Dayco – Dayco, Acc. Belt Tension Pulley (Part No.G60111330434DAY)
from
$12.51
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Precision bearing
- OE High quality pulley assembly
- Durable long life performance.
Dayco – Serpentine Idler/Tensioner Pulley; 74.3 mm Dia., 39.25 mm Smooth (Part No.89094)
from
$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today.
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, 1.75" Diameter (Part No.E72869)
from
$167.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.23955)
from
$35.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.23956)
from
$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Yukon Gear – Seal Puller Tool (Part No.56063)
Driveworks – Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count (Part No.795K6)
from
$26.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Poly Rib Belt HD Serpentine Belt; 124.41 Long, 8 Rib Count, Heavy Duty (Part No.5081244)
from
$56.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Dayco – Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty (Part No.5081260)
from
$73.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89377)
from
$49.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip
Product Features:
See More
Product Features:
- Endures the toughest conditions while promoting quieter performance and longer life
- Features a steel pivot tube on specific designs for enhanced stability
- Built to outperform and outlast competitive OE parts
- This tensioner is another Dayco product proudly made in the USA
Litens – Serpentine Belt Tensioner: 1 Piece (Part No.910032A)
from
$172.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Cummins 5.9/6.7L Diesel applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._
Product Features:
See More
Product Features:
- Heavy duty steel pulley construction.
- OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
- Installation instructions included
Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-006)
from
$75.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
- Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dayco – Acc. Belt Tensioner (Part No.G6001216475DAY)
from
$68.86
Acc. Belt Tensioner
Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)
from
$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Ram 4500 Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Ram 4500
You love your 4500. So we’ve made it easier than ever to help you find Ram 4500 Belts and Hoses in our online catalog. Our inventory holds 51 aftermarket and OEM Belts and Hoses for your Ram 4500, ranging from $11.79 to $172.99.
We offer parts from 8 brands trusted to make quality Belts and Hoses for your Ram 4500. Before you buy, take some time to read through customer reviews. We currently have 4,687 reviews of Ram 4500 Belts and Hoses from previous customers. Some of the top rated parts include Serpentine Belt Tensioner: 1 Piece with 4.9 stars and Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty with 4.1 stars.
Find your 4500 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ram 4500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Ram 4500
Our inventory holds Belts and Hoses for your Ram 4500 from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Litens, and Driveworks, all of which can keep that Ram happy.
We have Dorman parts available for your Ram 4500 in categories like Belt Tensioners. Some of the top-rated Dorman parts in these categories are:
Top-Rated Dayco Belts and Hoses
Leading Dayco Belts and Hoses
We carry Dayco brand parts for your Ram 4500 across several catalog categories, including Serpentine and V Belts and Pulleys. Some of our most reviewed Dayco parts include:
from
$29.99
(251)
Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth
Drive Belt Idler Assemblies
from
$24.99
(52)
Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth
Idler Pulleys
from
$73.99
(49)
Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty
Serpentine Belts
FAQs for Ram 4500 Belts and Hoses
What are the most purchased Belts and Hoses for the Ram 4500?
Out of 51 Belts and Hoses for the Ram 4500, the most popular in our inventory are:
What are the top-rated Ram 4500 Belts and Hoses?
Top-rated Belts and Hoses for your Ram 4500 based on customer reviews/ratings are:
from
$29.99
(7)
O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter
“Littens has always been a proven manufacturer of parts and this idler pulley was no exception. Installed properly and works great!”
