Ram 3500 Wheels and Tires
Top Ram 3500 Wheels and Tires Categories
We carry over 146 Wheels and Tires in inventory for the Ram 3500. If you’re looking for aftermarket Wheels and Tires for your Ram 3500, check out all these categories:
Essential Ram 3500 Wheels and Tires
KAI – Wheel Housing (Part No.RRP3752)
from
$116.99
New Standard Replacement Rear Inner Wheelhouse, Fits Driver And Passenger Side
Product Features:
See More
Product Features:
- Fits Driver And Passenger Side, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
COAST TO COAST – Oem, Fits Into Oem Wheel, Plated, Chrome, Abs Plastic, Set Of 2 (Part No.IWCC9009)
from
$112.99
CCI offers one of the largest selection of automotive wheel restyling accessories for Cars, Trucks, and SUV’s. All CCI products are designed and manufactured for both quality and fitment and carry a limited lifetime guarantee.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Manufactured With Automotive Grade Abs And Chrome Plated For A Long Lasting Shine And Durable
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
Yukon Gear – Chrysler 11.5" Rear Axle Bearing And Seal Kit (Part No.10050)
from
$279.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. 03 & up 11.5AAM Dodge dual rear wheel (DRW) bearing & seal kit. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits Chrysler 11.5″ with dual rear wheels
- Includes inner and outer bearings and races and axle seal
- Services one side
COAST TO COAST – Fits 17"Wheels, Chrome Abs, Push On, 8 Lug/5 Hand Hole Wheels, Set Of 4 (Part No.IWCN8010)
from
$373.99
Coast to Coast International wheel simulators and trim rings, also known as beauty rings, come in a variety of sizes. Manufactured to withstand the rigors of a work truck, simulators are available in high quality automotive grade ABS plastic or T304 stainless steel. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Match OEM Styling
- Constructed From High-Quality, Durable, 304 Stainless Steel Or Automotive Grade ABS
- Work In Conjunction With OEM Center Caps
- Installs In Minutes With No Required Tools Or Lug Nut Removal Required
- Quick And Easy Snap On Retention Without Lugnut Removal For 15 Minute Installation
COAST TO COAST – Chrome Plated, Aluminum, Set Of 2 (Part No.IWCC2415)
from
$86.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
Carquest Premium – Hub Assembly with Wheel Bearing (Part No.94-556387)
from
$211.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Autel – 1-Sensor Bulk Box (240-Pack, Rubber Valve) (Part No.300050)
from
$7322.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome Cone Seat Wheel Installation Kit for 8 Lug Vehicles (9/16"-18 Thread Size) (Part No.84834)
from
$449.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 28 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
Dill Air Control – Snap-In TPMS Service Kit: Rubber, For TRW Sensor; Includes Screw, 1 Piece (Part No.VS-65)
from
$6.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS rubber Snap-in stem for TRW sensor
- Includes screw
- 0.453″ rim hole compatibility
- 80 PSI maximum cold inflation pressure
Crown Auto Jeep Replacmnt – 14 Mm X 1.5 Thread Size, Conical Seat, Bulge Lug, 22 Mm Wrench Size, Oem, Single (Part No.6509422AA)
from
$8.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Dorman – Wheel Stud: Serrated, 9/16-18 Thread Size, Right Hand Thread, 1 Pack (Part No.610-558.1)
from
$21.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.79
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Driveworks – Wheel Seal (Part No.S-710563)
Huf North America – 433MHz OE Qual TPMS SensAlfa, Chrys, Ddge, Fiat,Infnti, Jep, Masrti, Mercds, Ram (Part No.RDE036V21)
from
$47.99
433MHz OE Qual TPMS SensAlfa, Chrys, Ddge, Fiat,Infnti, Jep, Masrti, Mercds, Ram
McGard – Chrome Cone Seat Wheel Lock Set (9/16"-18 Thread Size) – Set of 4 Locks and 1 Key (Part No.24134)
from
$44.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
COAST TO COAST – Chrome Plated, Abs Plastic, Set Of 2 (Part No.IWCC8010)
from
$175.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
COAST TO COAST – 20", 5 Spoke, Chrome Plated, Plastic, Set Of 4, Not Compatible With Steel Wheels (Part No.IWCIMP361X)
from
$149.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
- Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
- FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
- UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
- COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
- EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
COAST TO COAST – Chrome Plated, Abs Plastic, Set Of 2, For 8009 Wheels (Part No.IWCC8009)
from
$117.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
Yukon Gear – WheelStud (Part No.33562)
from
$14.99
WheelStud
McGard – Black Cone Seat Style Lug Nut Set (9/16"-18 Thread Size) – Set of 8 Lug Nuts (Part No.64816)
from
$99.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
McGard – Black Cone Seat SplineDrive Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 (Part No.65315BK)
from
$69.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65301 or 65302 Installation Tool sold separately.
McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M14 X 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64073)
from
$36.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each (Part No.VS-925A)
from
$8.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatiblity
- 200 PSI maximum cold inflation pressure
Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.68239720AB)
from
$56.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Dill Air Control – Snap-In TPMS Service Kit: Rubber, 0.453 Inch Stem (Part No.VS950)
from
$4.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Snap-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatibility
- 80 PSI maximum cold inflation pressure
Ram 3500 Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your Ram 3500
You love your 3500. So we’ve made it easier than ever to help you find Ram 3500 Wheels and Tires in our online catalog. Our inventory holds 146 aftermarket and OEM Wheels and Tires for your Ram 3500, ranging from $2.99 to $7,322.99.
We offer parts from 18 brands trusted to make quality Wheels and Tires for your Ram 3500. Before you buy, take some time to read through customer reviews. We currently have 32,880 reviews of Ram 3500 Wheels and Tires from previous customers. Some of the top rated parts include Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.42" L, Chrome, 4 Locks/1 Key with 2.7 stars and Multi-Purpose Bearing with 4.8 stars.
Find your 3500 Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ram 3500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your Ram 3500
Our inventory holds Wheels and Tires for your Ram 3500 from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like Autel, Dorman, and Schrader, all of which can keep that Ram happy.
We have COAST TO COAST parts available for your Ram 3500 in categories like Wheel Spacers. Some of the top-rated COAST TO COAST parts in these categories are:
from
$179.99
(1)
Fits 17" Wheels, Front, Chrome Plated, Abs Plastic, Snap On, Set Of 2
Wheel Simulators
Top-Rated Schrader Wheels and Tires
Leading Schrader Wheels and Tires
We carry Schrader brand parts for your Ram 3500 across several catalog categories, including TPMS Sensors. Some of our most reviewed Schrader parts include:
from
$43.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for Ram 3500 Wheels and Tires
What are the most purchased Wheels and Tires for the Ram 3500?
Out of 146 Wheels and Tires for the Ram 3500, the most popular in our inventory are:
from
$3.99
This product is not rated
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.87" Length, Chrome (sold by each)
Custom Wheel Lug nuts
from
$12.99
This product is not rated
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Dometop, 1.512" Length, Natural (OE Fix) (Sold by each)
Wheel Lug Nuts
What are the top-rated Ram 3500 Wheels and Tires?
Top-rated Wheels and Tires for your Ram 3500 based on customer reviews/ratings are:
from
$4.99
(6)
Snap-In TPMS Service Kit: Rubber, 0.453 Inch Stem
“Decent price, good quality, no problems”
