Ram 3500 Jacks, Garage and Equipment Products

Dee Zee Auxiliary Fuel Line Connector Kit – Gives you the ability to refuel your diesel fuel tank via gravity feed system. Connect to your Dee Zee Auxiliary Tank to your vehicle fuel line to always keep your tank full. All hoses and mounting hardware included. Some cutting may be required of the OEM fuel hose. Listed for diesel fuel operation only.

Product Features:

• Feed Diesel Directly Into Your Fuel Line
• Some Cutting Required On The OEM Fuel Hose
• Designed To Work With A 3/8 Inch Female Pipe Thread Drain Fitting
• Shut-Off Valve To Start And Stop Diesel Fuel Transfer

Made of a resilient poly material, the Dee Zee Poly Crossover Tool Box combines the functionality of a crossover tool box with the benefits of hardened poly plastic. This tough box can handle all the abuse you can throw at it, without sagging or denting. The center cross support ties the rear and the front together for additional support. The box has a double-wall lid for rigidity and features a molded brite-tread pattern and textured plastic. The overlapping flap on the lid deflects water from entering the box, where the next line of defense awaits with a foam gasket. You can trust your tools, camping gear or even your golf clubs will benefit from these features. The narrow design avoids interference with truck bed wheel wells and this box can be shipped via ground transportation without any large package surcharges Going hunting or camping this weekend and need something overnighted to your doorstep? Boom Available in two lengths to fit midsize trucks (63 Inch) and full-size trucks (70 Inch), this box has a discrete look with its low-profile lid that only sits inches above the bed rail and matches spray in bed liners.

Product Features:

• Rigid Poly Plastic Frame Resists Warping. No Sagging Or Denting
• Overlapping Lid And Foam Gasket Helps Make Box Weather Resistant
• Double-Wall Lid Features Molded Brite-Tread Pattern
• Metal Striker Plate In Lid Features Full Length Locking Rod For Tight Close
• Made In USA

Dee Zee Red Label Double Lid (Gull Wing) Crossover Boxes are made from Non-Rusting .056 Brite-Tread Aluminum with internal bends for superior rigidity throughout. A closed cell foam gasket defends the inside of the box against outside elements while a crown style lid and double v-pan lid stiffener create strength and rigidity throughout. When you open your toolbox a lot, you want a lid that can handle the abuse. that is why we equip our lids with dampened gas shocks for even opening and adjustable strikers to ensure silky smooth closing. A hidden full-length hinge keeps the lid movement feeling solid.

Product Features:

• Non Rusting Brite Tread Aluminum
• Lockable Stainless Steel Paddle Handle Or Black Pull Handle Latches
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Crowned Lid With Full Length Hidden Hinge
• Adjustable Lid Strikers For Secure Closing
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

The bigger the project the more tools you need to bring along for the job. You need a capable ToolBox to keep your tools secure and protected for the ride. The Dee Zee Red Label Single Lid Crossover ToolBox with its heavy-duty Brite-Tread aluminum construction is the right ToolBox for the task. Just because mother nature is not cooperating, does not mean you get the day off. You still have to pack your truck, load your tools, and head to the job site. Just another day in the office. it is days like this you will appreciate the weather resistant features of the Dee Zee Red Label Single Lid Crossover ToolBox. Built tough to endure a lifetime of abuse. When you work like we do, it goes without saying you are going to have to get your tools out of the box quite a bit. You want an easy operating and lasting lid construction that will stand up to years of continued use. The Dee Zee Red Label Single Lid Crossover ToolBox features a Crown style lid with a full pan double-V stiffener for superior rigidity. No wobbly lids here folks. You also get Lockable stainless-steel paddle or pull handles, dampened gas shocks, and adjustable strikers to ensure opening and closing the box remains smooth and effortless.

Product Features:

• Self Adjusting Striker Close Securely No Matter How Hard You Push The Lid Down
• Full Pan Support Double V Stiffener Design Reinforces The Lid For Superior Rigidity
• Dampened Gas Shocks Open At A Steady, Controlled Rate
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Hidden Hinge Runs The Full Length Of The Box For Maximum Strength
• Heavy duty Aluminum Built From non Rusting Brite Tread Aluminum. 3 Piece Body Front, Back And Bottom, All One Piece With Welded Ends For Increased Body Strength
• Paddle Handles With Guide Plate Lockable Handles Are Made From Stainless Steel. Removable Plastic Tool Tray Perfect For Keeping Smaller Items Organized
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

Dee Zee Red Label Chest is the perfect solution. Constructed of heavy duty Brite-Tread aluminum it can take a serious amount of abuse. A crown style lid with a full pan double-V stiffener offers superior rigidity for whatever you decide throw at it. Lockable stainless steel paddle handles keep your items safe and secure from the types of people your mother warned you about. Dampened gas shocks and adjustable strikers keep lid operation smooth and effortless. What good is a utility chest if it turns into a kiddie pool every time it rains. that is why we fortify our Red Label Series with closed cell foam gasket to keep outside elements where they belong. Our Red Label Utility Chest is forged out of non-rusting .056 Brite-Tread aluminum using internal bends for superior strength to create a box that can withstand years of abuse.

Product Features:

• Self Adjusting Striker Close Securely No Matter How Hard You Push The Lid Down
• Full Pan Support Double V Stiffener Design Reinforces The Lid For Superior Rigidity
• Dampened Gas Shocks Open At A Steady, Controlled Rate
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Hidden Hinge Runs The Full Length Of The Box For Maximum Strength
• Heavy duty Aluminum Built From Non Rusting Brite Tread Aluminum. 3 Piece Body Front, Back And Bottom, All One Piece With Welded Ends For Increased Body Strength
• Adjustable Lid Strikers For Secure Closing
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

At Dee Zee we love taking advantage of wasted space, that is why we are so fond of our Topsider Toolbox. It provides plenty of storage for tools and supplies in a secure box on top of your truck rails- allowing full use of your truck bed for hauling cargo. Constructed of durable Brite-Tread aluminum our Topsiders can be used alone or in combination with many of our Dee Zee boxes and accessories. Our C-Channel leak proof design incorporates a one-piece neoprene rubber bulb seal to defend against outside elements. Drop down doors provide quick access to your tools easily from the side of your truck. Locking stainless steel t-handle latch is easy to operate and offers security and peace of mind.

Product Features:

• Storage For The Top Rail Of The Truck Bed
• Stainless Steel Lockable T Handle Latch
• Drop Down Doors For Easy Access
• Safety Chains To Support The Door
• Made In USA

At Dee Zee we love taking advantage of wasted space, that is why we are so fond of our Topsider Toolbox. It provides plenty of storage for tools and supplies in a secure box on top of your truck rails- allowing full use of your truck bed for hauling cargo. Constructed of durable Brite-Tread aluminum our Topsiders can be used alone or in combination with many of our Dee Zee boxes and accessories. Our C-Channel leak proof design incorporates a one-piece neoprene rubber bulb seal to defend against outside elements. Drop down doors provide quick access to your tools easily from the side of your truck. Locking stainless steel t-handle latch is easy to operate and offers security and peace of mind.

Product Features:

• Storage For The Top Rail Of The Truck Bed
• Lockable Stainless Steel T Handle Latch
• Drop Down Doors For Easy Access
• Safety Chains To Support The Door
• Water Resistant C-Channel And Bulb Seal To Help Keep The Elements Out

The MotoRad MT-300 cooling system pressure tester is the professionals’ choice when it comes to testing vehicle cooling systems and coolant caps. This tester ensures an automotive cooling system is operating at the correct pressure for optimal performance. Made from high quality materials to ensure life-long durability. Designed to not only test the system, but also coolant caps. Over time, coolant cap seals, springs and valves can wear out causing a loss in system pressure. The MT300 provides quick diagnoses of cooling system issues.

Product Features:

• Includes the most common radiator and cap adapters
• More adapter kits available. See below for info
• As a safety feature there is a pressure release bar that when turned, it will release the pressure in the radiator neck or the Radiator cap for easy release
• Professional quality

Need to add fuel, injector cleaner or additive on a vehicle with a capless fuel system? This funnel is specially designed to make it easy without damaging the vehicle.

Product Features:

• Helpful tool – this handy funnel makes adding fuel, fuel additives or injector cleaner safer and more convenient on capless fuel systems
• Precise design – exact length to open the spring-actuated filler neck for a clean, complete pour
• Safe solution – made to engage the filler flap without damaging it, unlike another funnel or nozzle not designed for the same purpose
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive cooling systems.

Product Features:

• Machined metal construction
• Works with MT-300 pressure tester
• Tests cooling systems
• Professional quality