Ram 3500 Belts and Hoses

Essential Ram 3500 Belts and Hoses

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 1/2 Inch Length (Part No.87725)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 1/2 Inch Length

from

$15.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dorman – Automatic Belt Tensioner (Part No.419-039)

Automatic Belt Tensioner

from

$124.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999600A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$76.99
Litens was the Original Equipment (O.E.) supplier of this Chrysler/Dodge/Jeep/Ram tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed with a molded locator pins on the base to ensure precise installation location as well as a heavy-duty polymer pulley. To assist with belt installation and removal, the tensioner arm has an integrated lift feature. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use round spring technology and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900347A)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

from

$22.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, specifications and meets performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
  • Heavy Duty Polymer Pulley
  • Complete assembly including new bolt, dust shield, and spacer.
  • Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
  • Precise dimensional tolerance for smooth operation and long life
  • Service free sealed ball bearing. Molded-in ball bearing for optimal fit and long life
See More

Dayco – Serpentine Idler/Tensioner Pulley; 74.3 mm Dia., 39.25 mm Smooth (Part No.89094)

Serpentine Idler/Tensioner Pulley; 74.3 mm Dia., 39.25 mm Smooth

from

$21.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900125A)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

from

$32.49
Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Litens – Idler Pulley: Direct Fit, Steel, 123mm Diameter (Part No.900365A)

Idler Pulley: Direct Fit, Steel, 123mm Diameter

from

$124.99
This pulley is designed and engineered by Litens Automotive; the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include Dodge Pickups. Assembly includes: new pulley, mounting bolt, front washer, and rear spacer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance. Supplied as an assembly to reduce installation time.
  • Installation instructions included.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.75" Diameter (Part No.E72568)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.75" Diameter

from

$98.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.81" Diameter (Part No.D72905)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.5" Long, 1.81" Diameter

from

$47.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dorman – Radiator Coolant Hose (OE Fix) (Part No.626-325)

Radiator Coolant Hose (OE Fix)

from

$53.99
Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future.

Product Features:
  • Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability
  • Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
  • Complete replacement – hoses come with necessary clamps for easy installation
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Gates – Premium Molded Coolant Hose (Part No.23956)

Premium Molded Coolant Hose

from

$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically designed materials resist collapse under vacuum
  • Designed to resist electrochemical degradation, which is the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
  • Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
  • Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
  • Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – High Pressure Injector Line (Part No.904-924)

High Pressure Injector Line

from

$274.99
This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware for a complete installation.

Product Features:
  • Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
  • Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
  • Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
  • Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership
See More

Dorman – INJECTOR FEED LINE (Part No.904-329)

INJECTOR FEED LINE

from

$88.99
INJECTOR FEED LINE

Dayco – Poly Rib Belt Serpentine Belt; 36.02 Long, 5 Rib Count (Part No.5050360)

Poly Rib Belt Serpentine Belt; 36.02 Long, 5 Rib Count

from

$34.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Premium Molded Coolant Hose (Part No.23955)

Premium Molded Coolant Hose

from

$35.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically designed materials resist collapse under vacuum
  • Designed to withstand electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
  • Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
  • Warning: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.23605)

Premium Molded Coolant Hose

from

$80.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Serpentine Idler/Tensioner Pulley: Steel, 119mm Diameter, 37.5mm Width, 8 Groove (Part No.89168)

Serpentine Idler/Tensioner Pulley: Steel, 119mm Diameter, 37.5mm Width, 8 Groove

from

$69.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Driveworks – Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty (Part No.1260K8)

Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty

from

$61.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Gates – Micro-V Serpentine Drive Belt (Part No.K060795)

Micro-V Serpentine Drive Belt

from

$43.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
  • EPDM rubber constructions resist cracking on the surface of the ribs
  • Meets or exceeds all OEM specifications
  • It is recommended to replace the tensioner (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K081243HD)

FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt

from

$72.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides maximum performance at extreme, extended operating temperatures
  • Crack and wear resistant construction, even in extreme temperatures
  • Special compound provides unmatched flexibility, stability, load capacity and belt life
  • A problem-solving tool designed for the toughest applications
  • Consistently outperforms other heavy-duty coil belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Replacement of the tensioner is recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 130 Long, 8 Rib Count, Heavy Duty (Part No.5081300)

Poly Rib Belt HD Serpentine Belt; 130 Long, 8 Rib Count, Heavy Duty

from

$94.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 129.45 Long, 8 Rib Count, Heavy Duty (Part No.5081294)

Poly Rib Belt HD Serpentine Belt; 129.45 Long, 8 Rib Count, Heavy Duty

from

$69.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130░C (266░F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Helping You Find the Right Belts and Hoses for Your Ram 3500

You love your 3500. So we’ve made it easier than ever to help you find Ram 3500 Belts and Hoses in our online catalog. Our inventory holds 61 aftermarket and OEM Belts and Hoses for your Ram 3500, ranging from $15.29 to $274.99.

We offer parts from 7 brands trusted to make quality Belts and Hoses for your Ram 3500. Before you buy, take some time to read through customer reviews. We currently have 37,096 reviews of Ram 3500 Belts and Hoses from previous customers. Some of the top rated parts include Accessory Drive Belt Tensioner – Original Equipment Quality with 4.9 stars and Poly Rib Belt HD Serpentine Belt; 126 Long, 8 Rib Count, Heavy Duty with 4.1 stars.

Find your 3500 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ram 3500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Ram 3500

Our inventory holds Belts and Hoses for your Ram 3500 from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Litens, and DriveWorks, all of which can keep that Ram happy.
We have Dorman parts available for your Ram 3500 in categories like Belt Tensioners. Some of the top-rated Dorman parts in these categories are:
Automatic Belt Tensioner (Tensioner Only)
from $75.99
(1)
Automatic Belt Tensioner (Tensioner Only)
Belt Tensioner Assemblies

FAQs for Ram 3500 Belts and Hoses

What are the most purchased Belts and Hoses for the Ram 3500?

Out of 61 Belts and Hoses for the Ram 3500, the most popular in our inventory are:
Accessory Drive Belt Tensioner - Original Equipment Quality
from $76.99
This product is not rated
Accessory Drive Belt Tensioner – Original Equipment Quality
Belt Tensioner Assemblies
Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count
from $39.99
(36)
Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count
from $26.49
(19)
Poly Rib Belt Serpentine Belt; 79.53 Long, 6 Rib Count
Serpentine Belts

What are the top-rated Ram 3500 Belts and Hoses?

Top-rated Belts and Hoses for your Ram 3500 based on customer reviews/ratings are:
Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter
from $32.49
(7)
Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter
“Littens has always been a proven manufacturer of parts and this idler pulley was no exception. Installed properly and works great!”