Porsche Body Parts

Essential Porsche Body Parts

StrongArm – Hood Lift Support: 15.75" Ext Length, 6.0" Travel, 85 Lbs of Force, 1 Pk (Part No.D4631)

Hood Lift Support: 15.75" Ext Length, 6.0" Travel, 85 Lbs of Force, 1 Pk

from

$29.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

Pentosin – CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis (Part No.3J100337733PEN)

CHF11S Hi-Perf Power Steering Fluid for European Autos - Approved for Audis

from

$33.60
CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Windflector - Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc

from

$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:
  • The Windflector greatly reduces sunroof wind noise and air turbulence
  • Prevents the rain from entering the sunroof opening while driving
  • Helps reduce heat buildup inside the vehicle
  • Available in 5 different sizes for perfect fit
  • No drill installation
  • Installs quickly and easily with 3M automotive-grade adhesive
See More

Carquest – Idle Air Control Valve Connector (Part No.PT302)

Idle Air Control Valve Connector

from

$36.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
  • Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
  • RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Pentosin – Automatic Transmission Fluid – 1 Liter and with High Performance (Part No.1058112)

Automatic Transmission Fluid - 1 Liter and with High Performance

from

$27.49
Automatic Transmission Fluid – 1 Liter and with High Performance

MTC – Rivet (Part No.Q2001935428MTC)

Rivet

from

$1.45
Rivet

Original Equipment – Sunroof Seal (Part No.O904022699OEA)

Sunroof Seal

from

$47.32
Sunroof Seal

Febi – Door Panel Clip (Part No.O3030947709FEB)

Door Panel Clip

from

$1.78
Door Panel Clip

Stabilus – Gas Charged Hood Strut (Part No.O2020129286STB)

Gas Charged Hood Strut

from

$41.46
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

Atlas Lift – Lift Support (Part No.LS10411)

Lift Support

from

$22.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Original Equipment – Sunroof Seal (Part No.O904022698OEA)

Sunroof Seal

from

$68.45
Sunroof Seal

Burco – Side View Replacement Mirror (Part No.3624)

Side View Replacement Mirror

from

$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Atlas Lift – Lift Support (Part No.LS10170)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Stabilus – Gas Charged Hood Strut (Part No.O202023080STB)

Gas Charged Hood Strut

from

$32.86
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

Magneti Marelli – Power Window Regulator (Part No.O3040281721MRL)

Power Window Regulator

from

$198.81
Without Electric Motor Magneti Marelli manufactures a direct fit window regulator that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Meets or exceeds OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Provides exceptional reliability
See More

Original Equipment – Hood Pad (Part No.O20401868925OEA)

Hood Pad

from

$186.90
Hood Pad

ACDelco – Multi-Purpose Pigtail (Part No.PT2296)

Multi-Purpose Pigtail

from

$73.99
ACDelco Professional Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are a high quality replacement for many vehicles on the road today. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Protective outer coverings provide long-lasting durability
  • Color-coded wires allow for easy installation
  • Manufactured to meet expectations for fit, form, and function
See More

Original Equipment – Door Seal (Part No.O903022674OEA)

Door Seal

from

$105.78
Door Seal

Burco – Side View Replacement Mirror (Part No.2814)

Side View Replacement Mirror

from

$44.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

APA/URO Parts – SUNROOF SWITCH (Part No.O7010397471APA)

SUNROOF SWITCH

from

$49.11
SUNROOF SWITCH

Stabilus – Gas Charged Hood Strut (Part No.O2020467323STB)

Gas Charged Hood Strut

from

$33.33
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

Original Equipment – Stone Guard (Part No.O5159655961OEA)

Stone Guard

from

$119.26
Stone Guard

Original Equipment – Hood Pad (Part No.O204083364OEA)

Hood Pad

from

$88.54
Hood Pad

Carquest Premium – Convertible Top Relay (Part No.RAA3314)

Convertible Top Relay

from

$493.99
Convertible Top Relay

Worldpac – WINDOW REGULATOR (Part No.O30404185635ANA)

WINDOW REGULATOR

from

$476.29
WINDOW REGULATOR

Shop Deals on Porsche Body Parts

Advance Auto makes finding parts for your Porsche simple. Easily sort and compare top rated Body Parts brands that will fit your Porsche model. Shop with confidence by reading star ratings and reviews left by our valued customers. We offer a wide selection of Porsche replacement or OEM Body Parts for you to choose from.

Once you have found the Porsche part you are looking for, conveniently have it shipped directly to you or pick it up in-store at your local Advance Auto Parts. Start browsing our deals below and save big on Body Parts for your Porsche.