Porsche 914 Fuel and Emissions Systems

Essential Porsche 914 Fuel and Emissions Systems

Carquest Premium – Fuel Injector Seal Kit (Part No.AS010)

Fuel Injector Seal Kit

from

$11.49
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

CRP – Fuel Injector Seal (Part No.C101019205CRP)

Fuel Injector Seal

from

$2.47
Fuel Injector Seal

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Multi-Purpose Wire Connector with Leads

from

$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

APA/URO Parts – Fuel Tank Sending Un (Part No.E203030725APA)

Fuel Tank Sending Un

from

$215.54
Fuel Tank Sending Un

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1025)

Remanufactured Fuel Injector

from

$46.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1085)

Remanufactured Fuel Injector

from

$37.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1045)

Remanufactured Fuel Injector

from

$45.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Elring – Cold Start Valve Gasket (Part No.C400155249ELR)

Cold Start Valve Gasket

from

$2.91
Cold Start Valve Gasket

Carquest Premium – Fuel Pump E2496064 (Part No.E2496064)

Fuel Pump E2496064

from

$191.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Pump E259487 (Part No.E259487)

Fuel Pump E259487

from

$55.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.U260116)

Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer

from

$55.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Bosch – Turbine Electric Fuel Pump (Part No.E3000235076BOS)

Turbine Electric Fuel Pump

from

$280.00
Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.

Product Features:
  • OE-Equivalent Direct fit for easy installation.
  • OE connections and fittings.
  • Superior turbine pump design that virtually eliminates fuel pulsation.
  • Precision, spin-balanced armature to reduce noise and vibration.
  • Premium carbon brushes, utilizing advanced materials.
  • Noise suppression coil that eliminates radio frequency interference.
  • Illustrated step-by-step instructions are included.
See More

Sangsin – OE Replacement Ceramic Brake Pads (Part No.N1010935337SBC)

OE Replacement Ceramic Brake Pads

from

$93.14
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Sangsin manufactures and designs it’s brake pads to original equipment specifications for quality long lasting performance and is the OE supplier for major Korea automakers including Hyundai and Kia Motors. Sangsin is the largest friction manufacturer in Korea and has been devoted to manufacturing, researching and developing brake pads, linings and other vehicle friction material for over 40 years. Sangsin has eliminated friction materials that create black dust and noise and ensures quiet braking and clean wheels.

Product Features:
  • OE Ceramic formulation: Excellent fade resistance, Extremely low dust characteristics
  • Incorporates precision fit shims, OE positive mold design technology
  • OEM technology: Chamfered and Slotted to reduce noise when braking
  • Scorched as same as OE process in order to minimize the need for initial break-in and increase initial stopping power
  • 2-stage press process Fine blanked backing plate: insure precise fit and function
  • Underlayer between friction and backing plate to promote better friction to plate adhesion an minimize noise
  • OE level shim with premium Rubber-Steel-Rubber shim
See More

Delphi – Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware (Part No.FE0023)

Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware

from

$221.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Pierburg – Electric Fuel Pump (Part No.E3000422640APG)

Electric Fuel Pump

from

$267.17
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles

Product Features:
  • Made in Europe – 100% from OE factories and thus OE Standard
  • Optimal hot fuel supply properties and low noise level
  • Online Service and Product Information
  • Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
See More

Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)

High Performance Electric Fuel Pump - Universal Carbureted Engines

from

$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • Makes An Excellent Fuel Transfer or Booster Pump
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10545)

Fuel Injection Pressure Regulator

from

$92.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Helping You Find the Right Fuel and Emissions Systems for Your Porsche 914

You love your 914. So we’ve made it easier than ever to help you find Porsche 914 Fuel and Emissions Systems in our online catalog. Our inventory holds 20 aftermarket and OEM Fuel and Emissions Systems for your Porsche 914, ranging from $2.47 to $280.00.

We offer parts from 10 brands trusted to make quality Fuel and Emissions Systems for your Porsche 914. Before you buy, take some time to read through customer reviews. We currently have 78 reviews of Porsche 914 Fuel and Emissions Systems from previous customers.

Find your 914 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Porsche 914 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your Porsche 914

Our inventory holds Fuel and Emissions Systems for your Porsche 914 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Delphi, Mr. Gasket, and Carquest Premium, all of which can keep that Porsche happy.

FAQs for Porsche 914 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the Porsche 914?

Out of 20 Fuel and Emissions Systems for the Porsche 914, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Fuel Injector Seal Kit
from $11.49
This product is not rated
Fuel Injector Seal Kit
Fuel Injector Seal Kits
Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer
from $55.99
This product is not rated
Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer
Fuel Pumps