Pontiac Montana Ignition and Tune-Up Products

Please Select your Vehicle to See Exact Fit Parts

Essential Pontiac Montana Ignition and Tune-Up Products

Dorman – Engine Knock Sensor and Harness Kit (Part No.962-700)

Engine Knock Sensor and Harness Kit

from

$60.99
Check engine light on and vehicle running rough. Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:
  • Complete solution – this knock sensor kit includes a knock sensor and the wiring harness electrical connector
  • Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
  • Quality assured – benchmarked against original components for performance and quality
  • Excellent value – original equipment quality at significant cost savings
See More

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.213-1576)

Ignition Knock (Detonation) Sensor

from

$31.99
Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Sends signals to the engine control module (ECM) to adjust timing
  • Helps prevent damage to the engine caused by pre-ignition
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Knock (Detonation) Sensor with Thread Sealant (Part No.SBC3712)

Ignition Knock (Detonation) Sensor with Thread Sealant

from

$40.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Felpro – Distributor Mounting Gasket (Part No.72343)

Distributor Mounting Gasket

from

$4.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

ACDelco – RAPIDFIRE Spark Plug (Part No.6)

RAPIDFIRE Spark Plug

from

$7.99
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
  • Pure copper core provides great heat transfer and helps maximize plug durability
  • Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
  • Ribless insulator helps optimize plug to boot sea
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

ACDelco – Iridium Spark Plug (Part No.41-100)

Iridium Spark Plug

from

$12.99
ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle’s original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Iridium is the latest in spark plug technology and is an exact replacement for vehicles original components
  • Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability
  • Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance
  • Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics
  • Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Delphi – Ignition Control Module (Part No.GN10125)

Ignition Control Module

from

$284.99
Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:
  • Designed & manufactured to meet OE performance, durability, and EMC level requirements
  • OE quality replacement parts for the right fit, form and function
  • Delphi OE technology ignition products are validated to match the vehicle’s engine management system
  • Delphi ignition control modules are designed to control the timing of the spark plugs by activating the ignition coil at precise intervals
See More

MSD Ignition – MSD DIS-4 Plus; Distributorless 4 Channel (Part No.62152)

MSD DIS-4 Plus; Distributorless 4 Channel

from

$972.99
DIS-4 is capable of firing up to four coil packs or four individual coils. Each control delivers full power capacitive discharge sparks from idle through racing rpm. Below 3,000 rpm there is a series of multiple sparks that last for up to 20 degrees of crankshaft rotation to improve idle, starting and throttle response. The adjustable features of the DIS ignitions have also been upgraded with rotary dials. These provide easier, and more precise adjustments of the overrev limiter and the hole shot rev limit. Also, there is now a step retard that can be wired directly to a nitrous system or switch for activation. For use on 6 or 8 cylinder engines with two, three or four coil packs.

Product Features:
  • Two Step Rev Control
  • Step Retard
  • LED Monitor
  • Features Are Adjustable w/Rotary Switches
See More

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 6 Leads (Part No.51073)

Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 6 Leads

from

$35.99
Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
  • LIMITED WARRANTY: See package for details
See More

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI

from

$158.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes [6] 90 Deg. Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1539)

Multi-Use Connector

from

$82.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Delphi – Ignition Coil (Part No.GN10123)

Ignition Coil

from

$56.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
  • Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
  • We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1005)

Ignition Coil: Meets OE Specifications, 1 Count

from

$42.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Dorman – Help – Distributor O-Ring Assortment (Part No.90441)

Distributor O-Ring Assortment

from

$6.39
This distributor cap O-ring is designed to match the fit and function of the original O-ring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this distributor cap O-ring is designed to match the fit and function of the original O-ring on specified vehicles
  • Restores functionality – this O-ring is made to fit and fully restore part functionality after the original O-ring fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9746SS)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$77.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

GM Genuine Parts – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 6 Wire Set (Part No.746QQ)

Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 6 Wire Set

from

$151.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 6 Leads (Part No.51021)

Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 6 Leads

from

$36.99
Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
  • LIMITED WARRANTY: See package for details
See More

ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9726UU)

Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$62.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-6335)

Spark Plug Wire Set

from

$24.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Switch (Part No.CSE1424)

Ignition Switch

from

$115.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

GM Genuine Parts – Ignition Switch with Lock Cylinder Control Solenoid (Part No.D1404F)

Ignition Switch with Lock Cylinder Control Solenoid

from

$18.79
GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Work with vehicle electronics to help optimize vehicle capabilities
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Ignition Switch (Part No.CSC1411)

Ignition Switch

from

$25.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Pontiac Montana

You love your Montana. So we’ve made it easier than ever to help you find Pontiac Montana Ignition and Tune-Up Products in our online catalog. Our inventory holds 88 aftermarket and OEM Ignition and Tune-Up Products for your Pontiac Montana, ranging from $2.29 to $972.99.

We offer parts from 16 brands trusted to make quality Ignition and Tune-Up Products for your Pontiac Montana. Before you buy, take some time to read through customer reviews. We currently have 10,208 reviews of Pontiac Montana Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Spark Plug Wire Set with 4.4 stars and Platinum TT Spark Plug – PT16TT with 4.6 stars.

Find your Montana Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Pontiac Montana part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Pontiac Montana

Our inventory holds Ignition and Tune-Up Products for your Pontiac Montana from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like ACDelco, NGK, and Autolite, all of which can keep that Pontiac happy.

Top-Rated NGK Ignition and Tune-Up Products

Leading NGK Ignition and Tune-Up Products

We carry NGK brand parts for your Pontiac Montana across several catalog categories, including Spark Plugs. Some of our most reviewed NGK parts include:

FAQs for Pontiac Montana Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Pontiac Montana?

Out of 88 Ignition and Tune-Up Products for the Pontiac Montana, the most popular in our inventory are:
Double Platinum Spark Plug
from $10.99
(217)
Double Platinum Spark Plug
Spark Plugs
Iridium Spark Plug
from $12.99
This product is not rated
Iridium Spark Plug
Spark Plugs
Iridium Spark Plug
from $12.99
This product is not rated
Iridium Spark Plug
Spark Plugs

What are the top-rated Pontiac Montana Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Pontiac Montana based on customer reviews/ratings are:
Spark Plug Wire Set
from $42.99
(98)
Spark Plug Wire Set
“Works like it’s supposed to”
Platinum TT Spark Plug - PT16TT
from $6.59
(90)
Platinum TT Spark Plug – PT16TT
“Worked well”
Conventional Spark Plug
from $5.99
(88)
Conventional Spark Plug
“Great buy”