from

$165.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

High Output Fuel Flow
Flows 110 gph Free Flow
Shutoff Pressure Pre-Set From 6.5 To 8 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT
Inlet/Outlet Tapped For 3/8 in. NPT

from

$18.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$24.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$20.49

Original equipment heater hose connectors on certain vehicles are made of brittle plastic that cracks and leaks. These Dorman OE FIX connectors are upgraded to aluminum for greater durability.

Product Features:

Upgraded replacement – these heater hose elbow connectors are made of aluminum instead of brittle plastic
Smart solution – reduces the likelihood of the same part failing again the same way
Complete set – includes both upper and lower elbow with O-ring seal
Application specific – made specifically for wide range of Chevrolet, Buick, Oldsmobile and Pontiac vehicles

from

$27.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$50.99

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “O.E. Exact”

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$23.99

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$13.49

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

┬áProvides greater durability and flexibility Γ┐┐ 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
┬áResists heat, oil and grease

from

$289.99

Need to replace some fuel lines? Factory-style rigid replacement fuel lines can be tough to route under the vehicle. These Dorman OE FIX lines are made of braided stainless steel over flexible PTFE tubing, made to specific length for select vehicles, with new brackets and factory connectors for the easiest possible installation, and a long-lasting fix.

Product Features:

Ready to install – these braided stainless steel over PTFE flexible fuel lines are already cut to specific length for select vehicles, and include new brackets and factory connectors
Full length – these lines are made to the correct length for the specified vehicle, but flexible so they’re easier to route than rigid lines, saving replacement time
Upgraded materials – high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions
Trustworthy quality – engineered in the United States and backed by more than a century of aftermarket manufacturing expertise

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$24.99

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for better leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil, and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Warning: Do not use for fuel or oil transfer applications

from

$22.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$37.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special construction of the belt eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$48.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$19.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

Product Features:

Fitted with a high-quality NTN/NSK brand bearing for smooth operation and long life
Guaranteed fitment
Manufactured to OE idler pulley dimensions for proper clearances and belt alignment
High-strength alloy or composite pulley construction withstands brutal engine heat and vibration
Durable surface coating resists corrosion (metal models)

from

$12.79

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

from

$30.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$28.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$33.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$8.49

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Pontiac Firebird Belts and Hoses

Top Pontiac Firebird Belts and Hoses Categories

Essential Pontiac Firebird Belts and Hoses

Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)

Gates – Premium Molded Coolant Hose (Part No.20841)

Dayco – Idler Pulley, Dayco (Part No.89009)

Dorman – Help – Heater Hose Fittings with O-Rings – Aluminum (OE Fix) (Part No.47065HP)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 Inch Length (Part No.88358)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999008A)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Bottom Cog V-Belt; 36 Inch Long, Exact Fit Premium Quality (Part No.15360)

Dorman – Flexible Stainless Steel Braided Fuel Line (OE Fix) (Part No.819-004)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25484)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, .75" Diameter (Part No.E72001)

Gates – Micro-V Serpentine Drive Belt (Part No.K060630)

Driveworks – Poly Rib Belt Serpentine Belt; 98.03 Long, 6 Rib Count (Part No.980K6)

Autotecnica – Acc. Belt Idler Pulley, 90mm OD x 16.95mm ID x 30mm; With NTN/NSK Bearing (Part No.GM1413162)

Dorman – Idler Pulley (Pulley only) (Part No.419-603)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Dayco – Idler Pulley, Dayco (Part No.89026)

Dayco – Idler Pulley, Dayco (Part No.89015)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.25" Diameter (Part No.C71853)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22.25" Long, 1.25" Diameter (Part No.E71029)

Dorman – Help – Carburetor Pre-Heater Hose – 2 In. x 18 In. – Aluminum (Part No.96024)

Dorman – Help – Carburetor Pre-Heater Hose – 1-1/2 In. x 18 In. – Aluminum (Part No.96020)

Pontiac Firebird Belts and Hoses Categories

Helping You Find the Right Belts and Hoses for Your Pontiac Firebird

Top Belts and Hoses Brands for Your Pontiac Firebird

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

FAQs for Pontiac Firebird Belts and Hoses

What are the most purchased Belts and Hoses for the Pontiac Firebird?

What are the top-rated Pontiac Firebird Belts and Hoses?

Find Your Pontiac Firebird Belts and Hoses by Year

More Popular Parts for All Makes