Name: Yukon Gear Carrier Installation Kit for Dana 60 Differential, 57005
Brand: Yukon Gear
SKU: 57005
Price: 194.99 USD

Yukon Gear Carrier Installation Kit for Dana 60 Differential, 57005

from

$194.99

Yukon Carrier Installation Kits are a convenient and low-cost solution for carrier changes in cases where one is upgrading to a positraction limited slip differential, a mechanical locker, or an air operated locker. These kits contain carrier bearings and races and a carrier shim kit.

"Yukon Gear 8.25"" Chrysler Pinion Gear Thrust Washer, 33273"

from

$26.99

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

from

$7.99

Motive Gear Ring Gear Bolt, 1304. DRIVELINE – TRANSMISSION PARTS>DIFFERENTIAL PARTS>DIFFERENTIAL PARTS – MISC>DIFFERENTIAL PARTS – MISC from Motive Gear

Motive Gear Differential Pinion Shim Kit, 1104

from

$12.99

Motive Gear Differential Pinion Shim Kit, 1104.

USA Standard Gear Differential Cross Pin, 17035

from

$49.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

"Yukon Gear Differential Side Bearing Screw Adjuster for 9.25"" Chrysler, 33256"

from

$64.99

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

USA Standard Gear Replacement Ring & Pinion Gear Set For Dana 60 In A 3.54 Ratio, 36073

from

$375.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

"Yukon Gear Standard Open Notched Cross Pin Shaft for 9.25"" Chrysler, 33309"

from

$84.99

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

from

$11.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Felpro Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket, RDS 6095-1

from

$9.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

"Yukon Gear Positraction Spiders for Chrysler 9.25"" Dura Grip, 31 Spline, No Clutches, 16180"

from

$389.99

Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

Motive Gear Competition Yoke, MG1350-8759

from

$254.99

Motive Gear Competition Yoke, MG1350-8759.

USA Standard Gear Differential Rebuild Kit, 37090

from

$441.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

from

$854.99

Yukon Gear Differential, 26037. EXTERNAL SUPPLY>FDO>BACK ROOM-FDO>APPLICATION SPECIFIC from Yukon Gear

from

$12.49

Value-priced bearing meets all cataloged application requirements.

Yukon Gear Spindle Boring Tool Replacement Bit for Dana 60, 56050

from

$499.99

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

"Yukon Gear Power Lok Button Kit for Dana 30, Dana 44 & Chrysler 8.75"", 33536"

from

$67.99

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Yukon Gear Dana 60, Dana 70 & Dana 80 Cover Bolt, 33235

from

$5.99

“3/8″” cover bolt, Dana 60, Dana 70 & Dana 80.”

Motive Gear Differential Bearing Kit - Timken, R9.25RT

from

$112.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Powertrax Grip PRO Traction System, GT436035

from

$596.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

Motive Gear Differential Carrier Shim Kit, 1106

from

$18.99

Motive Gear Differential Carrier Shim Kit, 1106.

Yukon Gear Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70, 23007

from

$13.99

“Yukon spider gear set for GM 8.2″” Dura Grip posi, 28 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.”

Motive Gear Differential Ring and Pinion, D60-586

from

$218.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

USA Standard Gear Spartan Locker For Dana 60 Differential With 35 Spline Axles, Includes Heavy-Duty Cross Pin Shaft, 17004

from

$829.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Yukon Gear Pinion Install Kit for Dana 60 Rear Differential, 13032

from

$295.99

Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Plymouth Roadrunner Differentials

Your One-Stop Shop For Trusted Plymouth Roadrunner Differentials

Essential Plymouth Roadrunner Differentials

Yukon Gear – Yukon Gear Carrier Installation Kit for Dana 60 Differential, 57005 (Part No.57005)

Yukon Gear – "Yukon Gear 8.25"" Chrysler Pinion Gear Thrust Washer, 33273" (Part No.33273)

Motive Gear – Motive Gear Ring Gear Bolt, 1304 (Part No.1304)

Motive Gear – Motive Gear Differential Pinion Shim Kit, 1104 (Part No.1104)

USA Standard Gear – USA Standard Gear Differential Cross Pin, 17035 (Part No.17035)

Yukon Gear – "Yukon Gear Differential Side Bearing Screw Adjuster for 9.25"" Chrysler, 33256" (Part No.33256)

USA Standard Gear – USA Standard Gear Replacement Ring & Pinion Gear Set For Dana 60 In A 3.54 Ratio, 36073 (Part No.36073)

Yukon Gear – "Yukon Gear Standard Open Notched Cross Pin Shaft for 9.25"" Chrysler, 33309" (Part No.33309)

National – National Bearing Race, HM89410 (Part No.HM89410)

Felpro – Felpro Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket, RDS 6095-1 (Part No.RDS 6095-1)

Yukon Gear – "Yukon Gear Positraction Spiders for Chrysler 9.25"" Dura Grip, 31 Spline, No Clutches, 16180" (Part No.16180)

Motive Gear – Motive Gear Competition Yoke, MG1350-8759 (Part No.MG1350-8759)

USA Standard Gear – USA Standard Gear Differential Rebuild Kit, 37090 (Part No.37090)

Yukon Gear – Yukon Gear Differential, 26037 (Part No.26037)

Driveworks – Driveworks Taper Bearing Set, S-A-17 (Part No.S-A-17)

Yukon Gear – Yukon Gear Spindle Boring Tool Replacement Bit for Dana 60, 56050 (Part No.56050)

Yukon Gear – "Yukon Gear Power Lok Button Kit for Dana 30, Dana 44 & Chrysler 8.75"", 33536" (Part No.33536)

Yukon Gear – Yukon Gear Dana 60, Dana 70 & Dana 80 Cover Bolt, 33235 (Part No.33235)

Motive Gear – Motive Gear Differential Bearing Kit – Timken, R9.25RT (Part No.R9.25RT)

Powertrax – Powertrax Grip PRO Traction System, GT436035 (Part No.GT436035)

Motive Gear – Motive Gear Differential Carrier Shim Kit, 1106 (Part No.1106)

Yukon Gear – Yukon Gear Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70, 23007 (Part No.23007)

Motive Gear – Motive Gear Differential Ring and Pinion, D60-586 (Part No.D60-586)

USA Standard Gear – USA Standard Gear Spartan Locker For Dana 60 Differential With 35 Spline Axles, Includes Heavy-Duty Cross Pin Shaft, 17004 (Part No.17004)

Yukon Gear – Yukon Gear Pinion Install Kit for Dana 60 Rear Differential, 13032 (Part No.13032)

Plymouth Roadrunner Differentials List

Differentials Brands You Can Trust For Your Plymouth Roadrunner

Popular Driveworks Differentials

Top Plymouth Roadrunner Differentials from National

Most Purchased Plymouth Roadrunner Differentials from Driveworks

FAQs for Plymouth Roadrunner Differentials

What are the most purchased Differentials for the Plymouth Roadrunner?

What are the top-rated Plymouth Roadrunner Differentials?

Find Your Plymouth Roadrunner Differentials by Year

More Popular Parts for All Makes