Plymouth PB300 Van Ignition and Tune-Up Products

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The Ignitor II has many of the same great features that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the en

Product Features:

• PerTronix 9CH-181 Ignitor II Adaptive Dwell Control Chrysler Electronic Distributor 8 cyl
• Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

• Most Advanced Wire By Mallory
• RFI Suppression
• High Temperature Silicone Jacket
• Withstands Over 500+F
• Come In Ready To Use Kits
• Extra Long Kits

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• Triple Gasket Sealing: Prevents combustion gas leakage, ensuring efficient engine performance.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Designed to meet or exceed OE specifications in form, fit and function

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new unit with no core charges
• Precision machined shafts result in high speed accuracy and help prevent bearing failures
• Every distributor is tested to ensure reliable and long-lasting performance
• O-rings or gaskets included where applicable
• Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
• Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
• Original Equipment Equivalent high voltage ignition coils.
• 100% New Components and fasteners eliminate premature failures.

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

• CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
• CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
• CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

• CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
• CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
• CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Bolt-on Performance
• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Bolt-on Performance

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• High temperature enameled wires were specified for better insulation and performance
• With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

Distributor Rotor

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

• Improved output coil for electronic ignitions
• Works w/Blaster Ignition Or MSD 5/6/7 Series
• Ballast Resistor Required If Used w/Stock Points Ignition
• Alkyd tower w/high dielectric properties lessens carbon tracking

Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:

• 12 Volt Coil
• Oil-Filled Design
• Arch Resistant Alkyd Top
• Designed To Deliver Optimum Performance

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

• Engineered for higher energy output
• Improved throttle responce
• More high RPM power
• Chrome Plated