Plymouth PB150 Transmission Parts
Top Plymouth PB150 Transmission Parts Categories
We carry over 87 Transmission Parts in inventory for the Plymouth PB150. If you’re looking for aftermarket Transmission Parts for your Plymouth PB150, check out all these categories:
Essential Plymouth PB150 Transmission Parts
National – Bearings (Part No.A-36)
from
$27.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2525)
from
$6.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 65-89; DODGE 63-90; PLYM 67-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1963-1990
- Weight approx: 1 Lbs
- INSERT ONLY
FAG US – REPAIR SLEEVE (Part No.SR3506)
from
$56.99
REPAIR SLEEVE
Carquest Premium – Back Up Light Switch (Part No.SBA4468)
from
$16.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
FAG US – TAPERED ROLLER BEARI (Part No.KT16)
from
$15.29
TAPERED ROLLER BEARI
Driveworks – Tapered Cone Wheel Bearing Assembly (Part No.S-15101)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT SHF LINK BUSHING (Part No.TO-41)
from
$9.49
AT SHF LINK BUSHING
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.8160S)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
ATP – AT OVERHAUL KIT (Part No.TGS-19)
from
$82.99
AT OVERHAUL KIT
ATP – AT OIL PUMP SEAL (Part No.TO-8)
from
$12.49
AT OIL PUMP SEAL
ATP – AUTO TRANS BAND (Part No.TX-18)
from
$60.99
AUTO TRANS BAND
National – Shaft Repair Sleeve (Part No.99168)
from
$36.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Oil Seal (Part No.S-8516N)
from
$8.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT SEL SHAFT SEAL (Part No.TO-15)
from
$8.99
AT SEL SHAFT SEAL
ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)
from
$2.79
Product Features:
See More
- ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts
B & M – Torque Converter, Tork Master 2400 (Part No.10417)
from
$399.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
National – Bearings (Part No.A-18)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-20)
from
$143.99
One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Include steels, frictions, gaskets, and filter
- Includes Band and Modulator (if applicable)
National – Multi Purpose Seal (Part No.5206)
from
$19.29
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today¿s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40░F to 225░F / -40░C to 107░C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
ARP Auto Racing – For Use With Chrysler/ Dodge, 0.500" Under Head L, 7/16" – 20 Thread Size (Part No.240-7302)
from
$14.99
You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.
Product Features:
See More
Product Features:
- Super Strong, Rated At 200,000 PSI
- Designed For Specific Applications
- Delivers ARP Quality And Reliability
- Made In USA
- 7/16″-20 Thread Size
- 0.50″ Underhead Length
- Set of 4
ATP – AT SEAL (Part No.TO-34)
from
$5.99
AT SEAL
Plymouth PB150 Transmission Parts Categories
Helping You Find the Right Transmission Parts for Your Plymouth PB150
You love your PB150. So we’ve made it easier than ever to help you find Plymouth PB150 Transmission Parts in our online catalog. Our inventory holds 87 aftermarket and OEM Transmission Parts for your Plymouth PB150, ranging from $2.79 to $549.99.
We offer parts from 16 brands trusted to make quality Transmission Parts for your Plymouth PB150. Before you buy, take some time to read through customer reviews. We currently have 2,061 reviews of Plymouth PB150 Transmission Parts from previous customers. Some of the top rated parts include Transmission Oil Pan Gasket with 4.6 stars and Transmission Oil Pan Gasket with 4.8 stars.
Find your PB150 Transmission Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Plymouth PB150 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Transmission Parts Brands for Your Plymouth PB150
Our inventory holds Transmission Parts for your Plymouth PB150 from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Imperial, and National, all of which can keep that Plymouth happy.
We have ATP parts available for your Plymouth PB150 in categories like Automatic Transmission Parts. Some of the top-rated ATP parts in these categories are:
Top-Rated Imperial Transmission Parts
Leading Imperial Transmission Parts
We carry Imperial brand parts for your Plymouth PB150 across several catalog categories, including Transmission Cooler and Parts. Some of our most reviewed Imperial parts include:
FAQs for Plymouth PB150 Transmission Parts
What are the most purchased Transmission Parts for the Plymouth PB150?
Out of 87 Transmission Parts for the Plymouth PB150, the most popular in our inventory are:
What are the top-rated Plymouth PB150 Transmission Parts?
Top-rated Transmission Parts for your Plymouth PB150 based on customer reviews/ratings are:
from
$8.99
(46)
Transmission Oil Pan Gasket
“i used a slight coating of grey rtv on pan side of gasket, and no sealant on trans side of gasket.
worked perfect, no leaks”
from
$65.99
(11)
Econo-Kool® Transmission Oil Cooler
“In the instructions, a fitting kit #252 was required for my particular truck. It was wrong…#395 was the correct kit. Folks at Imperial advised me of”
