Plymouth Barracuda Steering and Chassis Parts

Essential Plymouth Barracuda Steering and Chassis Parts

MOOG – Idler Arm (Part No.K7042)

Idler Arm

from

$82.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Energy Suspension – Strut Rod Bushing Set (Part No.5.7109G)

Strut Rod Bushing Set

from

$30.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

MOOG – Ball Joint (Part No.K704)

Ball Joint

from

$58.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Powercraft – Pump Seal Kit (Part No.7897)

Pump Seal Kit

from

$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Self-Locking Nut (Part No.RP16538)

Self-Locking Nut

from

$3.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Retains bushings
See More

Driveworks – Taper Bearing Set (Part No.S-A-2)

Taper Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

3/8" ID Return Hose (sold by each)

from

$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Energy Suspension – Ball Joint Dust Boot Set (Part No.5.13102R)

Ball Joint Dust Boot Set

from

$10.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – SwyBarLink 1 EA ENRGY (Part No.9.8163R)

SwyBarLink 1 EA ENRGY

from

$25.99
SwyBarLink 1 EA ENRGY

Rare Parts – Pitman Arm (Part No.RP20258)

Pitman Arm

from

$214.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Reduces wander
  • Reduces vibration
  • Restores OE alignment
See More

Powercraft – Steering Gear Control Valve Seal Kit (Part No.8518)

Steering Gear Control Valve Seal Kit

from

$16.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Complete Rebuild Kit (Part No.7899)

Pump Complete Rebuild Kit

from

$125.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Lares – Remanufactured Power Steering Gear Box (Part No.1031)

Remanufactured Power Steering Gear Box

from

$625.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Lares – Remanufactured Power Steering Pump (Part No.2122)

Remanufactured Power Steering Pump

from

$248.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8765)

Steering Gear Complete Pitman Shaft Seal Kit

from

$54.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K5241)

Stabilizer Bar Bushing Kit

from

$8.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Energy Suspension – Torsion Bar Dust Boot Set (Part No.5.13101G)

Torsion Bar Dust Boot Set

from

$9.99
Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Torsion Bar
  • Lasts Longer
  • Looks Great
See More

KAI – Frame Rail (Part No.GMK212077070R)

Frame Rail

from

$515.99
New Goodmark Frame Rail Rear, Passenger Side

Product Features:
  • Passenger Side
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Powercraft – Steering Gear Major Seal Kit (Part No.7895)

Steering Gear Major Seal Kit

from

$119.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES319S)

Tie Rod End Adjusting Sleeve

from

$32.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Alloy steel construction provides durability
  • Includes any necessary hardware
See More

Carquest Premium – 5/8" I.D. Reservoir Hose (J189) (Sold by the foot) (Part No.34998)

5/8" I.D. Reservoir Hose (J189) (Sold by the foot)

from

$11.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Rated at 275 Deg. F
  • Inside Diameter: 5/8″
  • Shape: Straight
  • Outside Diameter: 0.91 in
  • Priced and sold by the foot. See Store for details.
See More

Energy Suspension – Sway Bar Bushing Set (Part No.5.5129G)

Sway Bar Bushing Set

from

$18.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

MOOG – Caster/Camber Adjusting Kit (Part No.K7030)

Caster/Camber Adjusting Kit

from

$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Helping You Find the Right Steering and Chassis Parts for Your Plymouth Barracuda

You love your Barracuda. So we’ve made it easier than ever to help you find Plymouth Barracuda Steering and Chassis Parts in our online catalog. Our inventory holds 143 aftermarket and OEM Steering and Chassis Parts for your Plymouth Barracuda, ranging from $2.99 to $679.99.

We offer parts from 14 brands trusted to make quality Steering and Chassis Parts for your Plymouth Barracuda. Before you buy, take some time to read through customer reviews. We currently have 35,216 reviews of Plymouth Barracuda Steering and Chassis Parts from previous customers. Some of the top rated parts include Stabilizer Bar Link Kit with 4.8 stars and 3/8" I.D. Return Hose J189 with 4.6 stars.

Find your Barracuda Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Plymouth Barracuda part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your Plymouth Barracuda

Our inventory holds Steering and Chassis Parts for your Plymouth Barracuda from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Carquest Premium, and Driveworks, all of which can keep that Plymouth happy.
We have Driveworks parts available for your Plymouth Barracuda in categories like Sway Bars and Steering Knuckles. Some of the top-rated Driveworks parts in these categories are:
Suspension Sway Bar Link Kit
from $10.29
(1)
Suspension Sway Bar Link Kit
Sway Bar Link Kits
Taper Bearing Set
from $8.99
(47)
Taper Bearing Set
Knuckle Bearings
Sway Bar Link Kits
from $18.99
(23)
Sway Bar Link Kits
Sway Bar Link Kits

Top-Rated Imperial Steering and Chassis Parts

Leading Imperial Steering and Chassis Parts

We carry Imperial brand parts for your Plymouth Barracuda across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for Plymouth Barracuda Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the Plymouth Barracuda?

Out of 143 Steering and Chassis Parts for the Plymouth Barracuda, the most popular in our inventory are:
3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
New Power Steering Filter
from $31.99
(59)
New Power Steering Filter
Power Steering Filters
3/8" ID Return Hose (sold by each)
from $2.99
This product is not rated
3/8" ID Return Hose (sold by each)
Power Steering Return Hoses

What are the top-rated Plymouth Barracuda Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your Plymouth Barracuda based on customer reviews/ratings are:
Stabilizer Bar Link Kit
from $24.99
(19)
Stabilizer Bar Link Kit
“Replaced the stabilizer bars on my 76 Vette. Perfect fit.”
3/8" I.D. Return Hose J189
from $46.49
(17)
3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
Pump Complete Rebuild Kit
from $62.99
(14)
Pump Complete Rebuild Kit
“everything I needed, all fit well.”