Peterbilt 310 Belts and Hoses
Top Peterbilt 310 Belts and Hoses Categories
We carry over 70 Belts and Hoses in inventory for the Peterbilt 310. If you’re looking for aftermarket Belts and Hoses for your Peterbilt 310, check out all these categories:
Essential Peterbilt 310 Belts and Hoses
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/4 Inch Inner Diameter (sold by inch) (Part No.76225)
from
$1.79
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Gates – Premium Molded Coolant Hose (Part No.21488)
from
$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- The specially designed materials resist collapse under vacuum.
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 1 3/4 Inch Inner Dia. (sold by inch) (Part No.77175GL)
from
$1.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 3/4 Inch Inner Diameter (sold by inch) (Part No.76275)
from
$2.49
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 1 5/8 Inch Inner Diameter (sold by inch) (Part No.76163)
from
$1.29
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Heater Hose; EPDM Rubber, 1 Inch Diameter (sold by foot) (Part No.80319)
from
$4.99
This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
- Compatible with all common coolants and coolant additives
- Insulating layer provides an added measure of protection against heat loss
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – V-Belt, Top Cog, Dayco (Part No.17470)
from
$32.99
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.
Product Features:
See More
Product Features:
- The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
- Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
- The laminated construction helps absorb greater shock loads associated with diesel engines
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9560HD)
from
$36.99
Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material provides maximum performance at extremely prolonged operating temperatures
- Heavy-duty construction resists cracking, wear, oil and heat
- The special compound provides unprecedented flexibility, stability, load-bearing capacity, and belt life.
- The unique notch design under the cord offers greater flexibility for smaller diameter pulleys
- Problem solver for failing disks
- Designed to save your fleet money and reduce downtime
- Compliant with RMA standards for oil and heat resistance and static conductivity requirements
Dayco – Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count (Part No.5060436)
from
$34.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 2 1/4 Inch Inner Dia. (sold by inch) (Part No.77225GL)
from
$2.49
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by inch) (Part No.77300GL)
from
$2.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40 Deg. F (-40 Deg. C) to +212 Deg. F (+100 Deg. C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Item is sold and priced by the inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 1 3/4 Inch Inner Diameter (sold by inch) (Part No.76175)
from
$1.29
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 1 3/8 Inch Inner Diameter (sold by inch) (Part No.76138)
from
$1.29
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Gates – Micro-V Serpentine Drive Belt (Part No.K080505)
from
$62.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
- EPDM rubber constructions resist cracking on the surface of the ribs.
- Meets or exceeds all original equipment manufacturer specifications
- It is recommended to replace the tensioner (if equipped).
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080505HD)
from
$98.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material offers optimal performance at prolonged extreme operating temperatures.
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- A special compound offers unparalleled flexibility, stability, load capacity, and belt lifespan.
- Troubleshooting designed for the most challenging applications
- It consistently outperforms other heavy-duty serpentine belts on the market
- Designed to save your fleet money and reduce downtime
- It is recommended to replace the tensioner (if equipped).
Gates – Micro-V Serpentine Drive Belt (Part No.K080525)
from
$57.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the surface of the ribs.
- Meets or exceeds all original equipment manufacturer specifications.
- Replacing the tensioner is recommended (if the vehicle is equipped with one).
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Dayco – Poly Rib Belt HD Serpentine Belt; 52.56 Long, 8 Rib Count, Heavy Duty (Part No.5080525)
from
$54.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Dayco – Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (sold by inch) (Part No.77200GL)
from
$1.99
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco Heavy Duty Straight Radiator Hose is made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds to withstand the most corrosive elements in diesel engines: oil, coolants, coolant additives, and temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C). This hose meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds
- Withstands the most corrosive elements in diesel engines: oil, coolants, and coolant additives
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (sold by inch) (Part No.77250GL)
from
$2.49
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/2 Inch Inner Diameter (sold by inch) (Part No.76250)
from
$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 1 5/8 Inch Inner Dia. (sold by inch) (Part No.77163GL)
from
$1.79
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).
Product Features:
See More
Product Features:
- Capable of withstanding extreme temperatures and high-pressure environments
- Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
- Not suitable for fuel or oil transfer
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Coolant Hose, Standard, I.D. 2" (sold by inch) (Part No.76200)
from
$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25804)
from
$58.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- Their high flexibility makes installation easier
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 Degrees F (+125 Degrees C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Peterbilt 310 Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Peterbilt 310
You love your 310. So we’ve made it easier than ever to help you find Peterbilt 310 Belts and Hoses in our online catalog. Our inventory holds 70 aftermarket and OEM Belts and Hoses for your Peterbilt 310, ranging from $1.29 to $98.99.
We offer parts from 3 brands trusted to make quality Belts and Hoses for your Peterbilt 310. Before you buy, take some time to read through customer reviews. We currently have 290 reviews of Peterbilt 310 Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt, Driveworks with 5.0 stars and Automotive V-Belt, Driveworks with 5.0 stars.
Find your 310 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Peterbilt 310 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Peterbilt 310
Our inventory holds Belts and Hoses for your Peterbilt 310 from 3 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Driveworks, and Gates, all of which can keep that Peterbilt happy.
We have Dayco parts available for your Peterbilt 310 in categories like Serpentine and V Belts. Some of the top-rated Dayco parts in these categories are:
FAQs for Peterbilt 310 Belts and Hoses
What are the most purchased Belts and Hoses for the Peterbilt 310?
Out of 70 Belts and Hoses for the Peterbilt 310, the most popular in our inventory are:
from
$1.29
This product is not rated
Straight Radiator Hoses; EPDM Rubber, 1 3/4 Inch Inner Diameter (sold by inch)
Upper Radiator Hoses
What are the top-rated Peterbilt 310 Belts and Hoses?
Top-rated Belts and Hoses for your Peterbilt 310 based on customer reviews/ratings are:
from
$4.29
(1)
Automotive V-Belt, Driveworks
“Horrible. I got the wrong part and their advice was to pry it on harder. I needed the 44in belt not the 42… 2in difference. They actually refused ”
