Omega Omega Parts

Name: Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8
Brand: Edelbrock
SKU: 7122
Price: 450.99 USD
Rating: 5.0 (1 reviews)

Please Select your Vehicle to See Exact Fit Parts

Omega Omega Engine Parts

from

$450.99

Product Features:

Designed for 1500 to 6500 Performance
Maximum Power in High-RPM with Good Low-End Torque
Matched to Edelbrock Performer RPM Intakes
10 to 12 in. of Manifold Vacuum at Idle
More Lift and Duration than Most Street Camshafts
Includes Hydraulic Lifters and Assembly Lube
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection

from

$26.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$534.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$35.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Manufactured for the repair environment
Unsurpassed quality you can trust
Unsurpassed quality you can trust

from

$3.29

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$81.99

The Edelbrock No. 9711 Intake Valve Seat set is a replacement for Edelbrock cylinder heads.

from

$1332.99

The Edelbrock #5025 E-Street cylinder heads are designed for Ford 289-351 W V8 applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for e

Product Features:

Complete Pair
60cc Combustion Chamber Volume
170cc Intake/60cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.625 in. Deck Thickness

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$1.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$52.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$155.99

The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:

Non-Rotator Type
1.460 in. Outer Diameter
Made In The USA
Single Coil Spring Type
Set of 16

from

$159.99

The Edelbrock #5845 Replacement Hydraulic Roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:

Non-Rotator Type
1.460 in. Outer Diameter
1.060 in. Inner Diameter
1.060 in. Coil Blind
Set of 16

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$437.99

The Edelbrock No. 8502 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need for valve train removal to facilitate cylinder head re-torqueing. Hardened and parallel-ground washers are included.

from

$21.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$120.99

High Energy Hydraulic lifters have a patented constant orifice metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and pushrod seat is maintained, eliminating excessive oiling at high engine speeds. The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance.In addition, High Energy Lifters have a lightweight check valve disc that allows for quicker response, which results in increased engine speed before valve float. This check valve disc also maintains added control at all engine speeds and loads.COMP Cams High Energy Hydraulic Lifters also contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.

Product Features:

.875″ diameter; 105g weight; 2.05″ seat height
Patented orifice metering valve precisely meters oil to the rocker arms
Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads

from

$18.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$66.99

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:

5/16″ diameter, 6.881″ length for Small Block Ford 255 and 302, ’65-up with Flat Tappet Cam
Best choice when building street rods, RVs or daily drivers
Meet or exceed all OE pushrod specifications
Mate perfectly with High Energy and Magnum Rockers
Durable one-piece construction

Omega Omega Exhaust Parts

from

$6.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$102.99

Vibe-Lock Bolt

from

$32.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold

from

$37.99

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

Product Features:

100 Percent Flexible Graphite Construction
Designed To Withstand Clamping Force And Incredible Heat
Eliminate Exhaust Leaks
No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque

from

$51.99

Seal-4-Good Header Flange Gasket

from

$222.99

Race Headers

from

$373.99

Product Features:

Universal down and forward turbo headers for Small Block Ford engines
Available with 1-3/4″ or 1-7/8″ mandrel bent primary tubes and 3″ collectors with merge spears for increased exhaust velocity
3/8″ thick header flanges for a leak-free seal
3″ V-band flanges and clamps included
Premium header gaskets and bolts included
Available in ceramic coated mild steel, natural 304 stainless steel, and polished 304 stainless steel

from

$277.99

Race Headers

from

$519.99

Product Features:

Universal down and forward turbo headers for Small Block Ford engines
Available with 1-3/4″ or 1-7/8″ mandrel bent primary tubes and 3″ collectors with merge spears for increased exhaust velocity
3/8″ thick header flanges for a leak-free seal
3″ V-band flanges and clamps included
Premium header gaskets and bolts included
Available in ceramic coated mild steel, natural 304 stainless steel, and polished 304 stainless steel

from

$562.99

Product Features:

Universal down and forward turbo headers for Small Block Ford engines
Available with 1-3/4″ or 1-7/8″ mandrel bent primary tubes and 3″ collectors with merge spears for increased exhaust velocity
3/8″ thick header flanges for a leak-free seal
3″ V-band flanges and clamps included
Premium header gaskets and bolts included
Available in ceramic coated mild steel, natural 304 stainless steel, and polished 304 stainless steel

from

$266.99

Race Headers

Omega Omega Performance and Racing Products

from

$716.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$819.99

The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.

Product Features:

Gold Dichromate Finish For Extreme Off Road Environments
Single Feed Fuel Inlet For Ease Of Installation
Optimized Off-Road Calibration That Works Out-Of-The-Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
One Piece Off-Road Vent Tube Eliminates Fuel Spillover
Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
Limited Lifetime Warranty Defects In Material/Workmanship

from

$509.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$511.99

Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:

Certified Billet Material
Borg and Beck Clutch Pattern
Long-Style Clutch Pattern
Ring Gear Securely Mounted To Prevent Spinning

from

$338.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$465.99

Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket

Product Features:

Idle-5500 RPM Range
Dual Plane Type-4150 Style Flange
3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
Black Powder Coated Finish
Made In The USA

from

$359.99

Product Features:

Best for the Ultimate in Street High-Performance
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades

from

$440.99

Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Product Features:

Designed for 2500 to 6500 Performance
Designed for Hi-Perf Street; Drag or Marine Use
Matched to Edelbrock Torker II Intakes
Includes Hydraulic Lifters and Assembly Lube
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection

Omega Omega Air Intakes

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$3.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$314.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal
Available in Multiple Finishes

from

$608.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal

from

$605.99

Edelbrock part #75213 RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8’s. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap design

Product Features:

1500-6500 RPM Range
Dual Plane Type-4150 Style Flange
4.3 in. Front Height, 4.9 in. Center Height, 5.5 in. Rear Height
Black Powder Coated Finish
Made In The USA

from

$454.99

Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and i

Product Features:

RPM Air-Gap for 302-331-347 Small-Block Ford V8
Air-Gap design features an open air space under the plenum
Separates fuel and air from engine heat
Larger runners over standard 7121 manifold
Includes nitrous bosses

from

$506.99

Product Features:

Single plane design with isolated plenum for cooler charge air temperatures
4150 square bore mounting flange
Power band: 2500-7500 RPM
Height: front 5.58″, rear 6.40″
Port size: 1.82″ height, 1.04″ width
Extra material allows for porting to 2.00″ height, 1.20″ width
Accessory ports under the carburetor in 1/8 NPT, 1/4 NPT and 3/8 NPT sizes

from

$3.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$3.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$1350.99

Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:

Aluminum Construction
Saves 4.5 Pounds 38% Weight Savings
Contoured Venturi Inlet Balances Airflow For Increased hp
Air Bleeds Moved Outward For Smoother Transition Of Airflow
Metering Blocks/True Gasket Sealing/Fully Adjustable
Idle Bypass Valve Eliminates Holes In Throttle Plates
Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Both Sides Of Bowls For Safe Fuel Level
Drain Plug On Bowl Provides Easy Access To Empty Bowl
8AN O-Ringed Inlet Threads Offer A Variety Of Plumbing Options
4 Corner Idle Allows You To Precisely Control Your Idle System

from

$457.99

The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$921.99

Holley Double Pumper(R) carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile.

Product Features:

Metering Blocks Base Plate For Good Looks True Gasket Sealing
Optimized Street/Strip Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Mechanical Secondaries For Awesome Tire Turning Performance
4 Corner Idle Allows You To Precisely Control Your Idle System
Clear Fuel Level Sight Glass No Mess Fuel Level Adjustments
Aluminum Construction For A 43% Weight Savings
Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$1650.99

The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!

Product Features:

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Calibrations For Todays Larger Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore
Integrated Idle Bypass Valve Allows For Adjustment Of Idle
12 Hole Billet Booster Superior Atomization/Throttle Response
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
Drain Plug On Bowl Provides Easy Access To Empty Bowl
Contoured Hex Head Squirter Screws For Streamlined Airflow

from

$1230.99

Aluminum Construction
Saves 4.5 Pounds 38% Weight Savings
Has A Set Screw In The Base Plate For Wide Open Throttle Stop
Throttle Shafts Rides In Oil Smooth Throttle Actuation
Metering Blocks/True Gasket Sealing/Fully Adjustable
Contoured Venturi Inlet Balances Airflow For Increased hp
Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
Metering Blocks Feature Durability True Gasket Sealing
Idle Bypass Valve Eliminates Need For Holes In Throttle Plates
Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
Clear Sight Windows For Easy/Safe Fuel Level Adjustments

from

$1950.99

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Calibrations For Todays Larger Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore
Integrated Idle Bypass Valve Allows For Adjustment Of Idle
12 Hole Billet Booster Superior Atomization/Throttle Response
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
Drain Plug On Bowl Provides Easy Access To Empty Bowl
Contoured Hex Head Squirter Screws For Streamlined Airflow

from

$921.99

Metering Blocks Base Plate For Good Looks True Gasket Sealing
Optimized Street/Strip Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Mechanical Secondaries For Awesome Tire Turning Performance
4 Corner Idle Allows You To Precisely Control Your Idle System
Clear Fuel Level Sight Glass No Mess Fuel Level Adjustments
Aluminum Construction For A 43% Weight Savings
Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$549.99

The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.

Product Features:

Vibratory Polished For Good Looks
Man. Choke Cable Hand Controlled For Cold Start Control
50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
Power Valve Blow-Out Protection
100% Wet-Flow Tested To Assure It Arrives Ready To Run

from

$1300.99

Aluminum Construction
Saves 4.5 Pounds 38% Weight Savings
Contoured Venturi Inlet Balances Airflow For Increased hp
Air Bleeds Moved Outward For Smoother Transition Of Airflow
Metering Blocks/True Gasket Sealing/Fully Adjustable
Idle Bypass Valve Eliminates Holes In Throttle Plates
Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Both Sides Of Bowls For Safe Fuel Level
Drain Plug On Bowl Provides Easy Access To Empty Bowl
8AN O-Ringed Inlet Threads Offer A Variety Of Plumbing Options
4 Corner Idle Allows You To Precisely Control Your Idle System

from

$519.99

The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore

from

$1550.99

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Calibrations For Todays Larger Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore
Integrated Idle Bypass Valve Allows For Adjustment Of Idle
12 Hole Billet Booster Superior Atomization/Throttle Response
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
Drain Plug On Bowl Provides Easy Access To Empty Bowl
Contoured Hex Head Squirter Screws For Streamlined Airflow

from

$1300.99

Aluminum Construction
Saves 4.5 Pounds 38% Weight Savings
Contoured Venturi Inlet Balances Airflow For Increased hp
Air Bleeds Moved Outward For Smoother Transition Of Airflow
Metering Blocks/True Gasket Sealing/Fully Adjustable
Idle Bypass Valve Eliminates Holes In Throttle Plates
Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Both Sides Of Bowls For Safe Fuel Level
Drain Plug On Bowl Provides Easy Access To Empty Bowl
8AN O-Ringed Inlet Threads Offer A Variety Of Plumbing Options
4 Corner Idle Allows You To Precisely Control Your Idle System

from

$1699.99

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Calibrations For Todays Larger Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore
Integrated Idle Bypass Valve Allows For Adjustment Of Idle
12 Hole Billet Booster Superior Atomization/Throttle Response
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
Drain Plug On Bowl Provides Easy Access To Empty Bowl
Contoured Hex Head Squirter Screws For Streamlined Airflow

from

$1300.99

Aluminum Construction
Saves 4.5 Pounds 38% Weight Savings
Contoured Venturi Inlet Balances Airflow For Increased hp
Air Bleeds Moved Outward For Smoother Transition Of Airflow
Metering Blocks/True Gasket Sealing/Fully Adjustable
Idle Bypass Valve Eliminates Holes In Throttle Plates
Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Both Sides Of Bowls For Safe Fuel Level
Drain Plug On Bowl Provides Easy Access To Empty Bowl
8AN O-Ringed Inlet Threads Offer A Variety Of Plumbing Options
4 Corner Idle Allows You To Precisely Control Your Idle System

from

$1499.99

All Aluminum Construction Saves 3.8 lbs. Over Original Models
28% Weight Savings
Calibrations For Todays Larger Race Engines and New Fuels
Fully Machined From Venturi Throat To Throttle Bore
Integrated Idle Bypass Valve Allows For Adjustment Of Idle
12 Hole Billet Booster Superior Atomization/Throttle Response
Metering Blocks Feature Improved True Gasket Sealing
Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
Drain Plug On Bowl Provides Easy Access To Empty Bowl
Contoured Hex Head Squirter Screws For Streamlined Airflow

from

$649.99

Competition fuel curves provide safe and reliable horsepower for high performance race engines.

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Man. Choke Cable Hand Controlled For Cold Start Control
50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
Power Valve Blow-Out Protection
100% Wet-Flow Tested To Assure It Arrives Ready To Run

Looking for the best Omega Omega aftermarket replacement parts? Replacing worn and broken parts on your Omega Omega? Check out our online catalog to find the best selection of aftermarket Omega Omega parts as well as real user reviews on Omega Omega replacement parts. Make an informed decision about every component you add to your Omega.

At Advance Auto, we’ve got you covered when it comes to getting your Omega Omega in tip top condition. We’ve got over 203 Omega Omega parts to choose from in popular categories like Automotive Accessories, Engine Parts and Exhaust Parts. If you’re looking for the best prices, try searching our Omega Omega parts catalog to compare OEM and aftermarket parts for your Omega Omega.

Whether you need Omega Omega body parts, interior components, or custom Omega Omega parts you can find them online at Advance Auto. Want to order your Performance and Racing Products online? Or maybe you need your Omega Air Intakes same day? No problem, you can pick up Omega parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Omega Omega parts has never been easier.

Advance Auto customers frequently search for the following types of Omega Omega auto parts. Check out customer reviews and ratings, and compare prices on the following Omega Omega parts:

People also search Advance Auto for these popular years of the Omega Omega:

Omega Omega Parts

Edelbrock – Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8 (Part No.7122)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45008)

Edelbrock – Rollin’ Thunder Camshaft for Ford 5.0L V8 (Part No.3722)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9333 PT-1)

Felpro – Engine Oil Pump Pickup Tube Gasket (Part No.72516)

Edelbrock – Valve Seat For S/B Chevy Heads With 1.60" Valves (Part No.9711)

Edelbrock – Small-Block Ford E-Street Cylinder Heads 2.02" (Part No.5025)

Felpro – VALVE COVER GASKET SET (Part No.VS 50029 C)

MAHLE Original – Fuel Pump Gasket (Part No.D27094)

Felpro – Engine Conversion Gasket Set (Part No.CS 8548-4)

Felpro – Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (Part No.OS 13260 T)

Edelbrock – Sure Seat Valve Springs (Part No.5825)

Edelbrock – Sure Seat Valve Springs (Part No.5845)

Competition Cams – Super Valve Locks, 11/32" 1 St (Part No.611-16)

Edelbrock – Ford Head Stud Kit 1949-53 (Part No.8502)

Victor Reinz – Engine Crankshaft Seal Kit (Part No.19-10156-01)

Competition Cams – HYDRAULIC LIFTER SET, SBFORD 1 ST (Part No.832-16)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 30136)

Competition Cams – PUSHROD SET, SBF HIGH ENERGY 1 ST (Part No.7831-16)

Felpro – Exhaust Pipe Flange Gasket (Part No.60985)

Felpro – Exhaust Pipe Flange Gasket (Part No.8194)

Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 90000)

Remflex – Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Square Port Size (Part No.3028)

Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66014)

Flowtech – Race Headers (Part No.12164FLT)

Flowtech – Flowtech Small Block Ford Turbo Headers – Natural 304 Stainless Steel (Part No.12167FLT)

Flowtech – Race Headers (Part No.12168FLT)

Flowtech – Flowtech Small Block Ford Turbo Headers – Ceramic Coated (Part No.32166FLT)

Flowtech – Flowtech Small Block Ford Turbo Headers – Ceramic Coated (Part No.32169FLT)

Flowtech – Race Headers (Part No.12165FLT)

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Holley – Off Road Carbs (Part No.0-90670)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Hays – Flywheels (Part No.12-535)

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Black Finish (Part No.21213)

Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)

Edelbrock – Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8 (Part No.5022)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90103-1)

Felpro – Air Cleaner Mounting Gasket (Part No.60032)

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Polished Finish (Part No.21211)

Edelbrock – RPM Air-Gap Small Block Ford 302 Black Intake Manifold (Part No.75213)

Edelbrock – RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8 (Part No.7521)

Holley – Single Plane 4150 Carbureted Intake Manifold (Part No.300-277)

Victor Reinz – Carburetor Mounting Gasket (Part No.71-13697-00)

Felpro – Carburetor Mounting Gasket (Part No.60094-1)

Holley – Professional Race Carburetor: 950 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80805BKX)

Edelbrock – Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)

Holley – Performance and Race Carburetor: 750 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-76750BK)

Holley – Professional Race Carburetor: 950 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80901RD)

Holley – Professional Race Carburetor: 650 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80812BKX)

Holley – Professional Race Carburetor: 1150 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Hard Core Gray (Part No.0-80906HB)

Holley – Performance and Race Carburetor: 650 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-76650BL)

Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)

Holley – Professional Race Carburetor: 750 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80803RDX)

Edelbrock – AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1901)

Holley – Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80902BK)

Holley – Professional Race Carburetor: 850 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80804BKX)

Holley – Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Hard Core Gray (Part No.0-80902HB)

Holley – Professional Race Carburetor: 750 CFM, No Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80803BKX)

Holley – Professional Race Carburetor: 1050 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Shiny (Part No.0-80902RD)

Holley – Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet (Part No.0-4412CT)