Oldsmobile Toronado Heater Hoses

Your One-Stop Shop For Trusted Oldsmobile Toronado Heater Hoses

If you’re in search of Oldsmobile Toronado Heater Hoses aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 12 Heater Hoses from top brands with prices ranging from $5.79 to $25.99.

Beyond great prices, we stock trusted brands manufacturing all types of Heater Hoses for your Oldsmobile Toronado. Of the 3 OEM and aftermarket parts brands we carry, some of the most popular are Dayco, Dorman, and Gates.

And don’t forget to read customer reviews across all Heater Hoses categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.

At Advance Auto Parts, we don’t think top quality Heater Hoses have to cost top dollar, and we prove it. Browse our top Oldsmobile Toronado Heater Hoses below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.

Essential Oldsmobile Toronado Heater Hoses

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 60 Inch Length (Part No.80418)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 60 Inch Length

from

$11.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The k

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.25" Long, .63" Diameter (Part No.A70001)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.25" Long, .63" Diameter

from

$10.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Molded 90 Degree Heater Hose (Part No.28467)

Molded 90 Degree Heater Hose

from

$15.29
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:
  • Resists electrochemical degradation and water permeation
  • Use with heater hose connectors and bulk heater hose to create custom assemblies
  • Compatible for coolant, air and water applications
  • EPDM tube and cover, synthetic fiber reinforcement
  • SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.18423)

Premium Molded Heater Hose

from

$24.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 9/32 Inch Diameter, 2 Inch Length (Part No.86814)

Molded Heater Hose; EPDM Rubber, 9/32 Inch Diameter, 2 Inch Length

from

$13.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.75" Long, .75" Diameter (Part No.A70476)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.75" Long, .75" Diameter

from

$21.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Heater Hose (Part No.19670)

Premium Molded Heater Hose

from

$16.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 Inch Length (Part No.88358)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 Inch Length

from

$25.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 48 Inch Length (Part No.80417)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 48 Inch Length

from

$17.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.25" Long, .63" Diameter (Part No.A71311)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.25" Long, .63" Diameter

from

$9.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dorman – Help – Heater Hose Connectors – 5/8 In. Hose X 1 In.-14 Uns X 2 In. Long Nipple – Metal (Part No.56359)

Heater Hose Connectors - 5/8 In. Hose X 1 In.-14 Uns X 2 In. Long Nipple - Metal

from

$11.79
This replacement HVAC heater hose fitting is engineered to match the fit and durability of the stock hose fitting on specified vehicles. It is designed to withstand extreme temperatures to ensure leak-free service.

Product Features:
  • Ideal replacement – this HVAC heater hose fitting directly replaces the original fitting on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperatures and deliver leak-free performance
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Dorman – Heater Hose Fitting 5/8 In. Hose X 1 In. – 14 Uns X 2 In. Long (Part No.500-048.1)

Heater Hose Fitting 5/8 In. Hose X 1 In. - 14 Uns X 2 In. Long

from

$5.79
This replacement HVAC heater hose fitting is engineered to match the fit and durability of the stock hose fitting on specified vehicles. It is designed to withstand extreme temperatures to ensure leak-free service.

Product Features:
  • Ideal replacement – this HVAC heater hose fitting directly replaces the original fitting on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperatures and deliver leak-free performance
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Heater Hoses Brands You Can Trust For Your Oldsmobile Toronado

3 trusted brands of Heater Hoses line our shelves, ready to help keep your Oldsmobile Toronado running smooth. Below are some of the most popular brands and their top Heater Hoses offerings:

Most Purchased Oldsmobile Toronado Heater Hoses from Dayco

When you buy the most frequently purchased Dayco brand Heater Hoses, you can be confident it will be the right part for your Oldsmobile Toronado. Here are the Dayco Heater Hoses Advanced Auto customers buy the most:
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 60 Inch Length
from $11.79
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 60 Inch Length
Heater Hoses
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.75" Long, .75" Diameter
from $21.29
This product is not rated
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.75" Long, .75" Diameter
Heater Hoses

FAQs for Oldsmobile Toronado Heater Hoses

What are the most purchased Heater Hoses for the Oldsmobile Toronado?

Out of 12 Heater Hoses for the Oldsmobile Toronado, the most popular in our inventory are:
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 60 Inch Length
from $11.79
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 60 Inch Length
Heater Hoses
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.75" Long, .75" Diameter
from $21.29
This product is not rated
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.75" Long, .75" Diameter
Heater Hoses
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 48 Inch Length
from $17.49
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 48 Inch Length
Heater Hoses