Oldsmobile Jetfire Ignition and Tune-Up Products
Top Oldsmobile Jetfire Ignition and Tune-Up Products Categories
We carry over 65 Ignition and Tune-Up Products in inventory for the Oldsmobile Jetfire. If you’re looking for aftermarket Ignition and Tune-Up Products for your Oldsmobile Jetfire, check out all these categories:
Essential Oldsmobile Jetfire Ignition and Tune-Up Products
ACDelco – Ignition Capacitor (Part No.D204)
from
$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
PerTronix – 91181 Ignitor II Adaptive Dwell Control Delco 8 cyl (Part No.91181)
from
$185.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.
Product Features:
See More
Product Features:
- Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
- Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
- Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
- Synchronized peak current and spark timing reduces heat build-up.
- Senses startup and develops more energy for quicker, easier starting.
- Pair with a Flame Thrower Canister Coil for optimal performance
- Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
PerTronix – High-Performance Electronic Ignition for Delco 8-Cylinder Engines (Part No.1181)
from
$125.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition.
Product Features:
See More
Product Features:
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over “points” in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing; no need for any adjustments.
Accel – 7Mm Super Stock Copper Uni (Part No.3008)
from
$59.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm Yellow Silicone Jacket
- Street-driven Applications
- Copper Core
- Orange Spark Plug Boots
- Pre HEI Vehicles
- Universal Wire Set
Accel – 8Mm Super Stock Copper Uni (Part No.4038)
from
$81.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$149.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$170.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
PerTronix – D9006 Flame-Thrower Hei Distributor Adjustable Vacuum Advance Canister (Part No.D9006)
from
$33.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.
Product Features:
See More
Product Features:
- PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
- These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
Accel – Adj:Vac Adv GM V8 Point Dist (Part No.31034)
from
$60.99
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.
Product Features:
See More
Product Features:
- Adjustable Vacuum Advance
- Increases Horsepower And Throttle Response
- Includes Allen Wrench For Adjustments
- Instantly Increase Horsepower
- Maximum Possible Spark Advance
- Not Legal For Sale/Use In CA
Champion – Copper Plus Spark Plug (L90C): Dependable Performance & Durability (Part No.896)
from
$2.49
Copper Plus Spark Plug (L90C) delivers dependable performance and durability, making it a trusted choice for maintaining your vehicle’s efficiency. Engineered with a copper core electrode, this spark plug ensures increased conductivity and superior heat control, promoting consistent ignition and optimal engine operation. Its design resists fouling, helping to maintain peak performance over time, while the superior corrosion resistance enhances its longevity even in demanding conditions. Proven to deliver reliable results, this spark plug is tailored for good overall wear, ensuring your engine runs smoothly and efficiently. Whether you’re focused on durability or performance, this spark plug offers exceptional value for keeping your vehicle in top shape.
Product Features:
See More
Product Features:
- Resists fouling
- Superior corrosion resistance
- Dependable and proven performance
- Increased conductivity and heat control for good overall wear
- Promotes consistent ignition for optimal engine operation.
NGK – Standard Nickel Spark Plug (BPR5HS): Reliable OE Performance (Part No.6222)
from
$5.99
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
MSD Ignition – Wire Set; Black Super Conductor; 8-cyl. Multi-Angle; Universal (Part No.31193)
from
$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. Multi-angle boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)
from
$112.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
PerTronix – D4051 Flame-Thrower HEI Distributor Cap Red (Part No.D4051)
from
$40.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)
from
$45.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
MSD Ignition – Blaster 2 Black Coil; Hi-Performance (Part No.82023)
from
$55.99
Our famous red canister coil in black! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister. The Blaster Coil is designed to mount in most factory canister coil mounts. MSD also offers a Chrome Coil Bracket, PN 8213. It is recommended to mount the PN 8202, PN 82023, and 8223 coils in an upright position. The High Vibration Coil, PN 8222, can be mounted in any position due to its epoxy potting compound.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series (ballast resistor required for points)
- Alkyd tower with high dielectric properties is less prone to carbon tracking
- 100:1 turns ratio and lower primary resistance produce high voltage output
- Metal canister is filled with a premium grade oil for cooling
- CARB E.O. Approved
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$53.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Carquest Premium – Distributor Rotor (Part No.DAA1004)
from
$7.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Rotor (Part No.23A1019)
from
$6.39
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
PerTronix – D1100 Flame-Thrower Distributor Hei Oldsmobile V8 Black Cap (Part No.D1100)
from
$355.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- New lightweight aluminum alloy housing.
- Aligned and honed high quality bronze sintered bushings for reduced friction and extended life.
- Centerless ground corrosion resistant shaft reduces friction and provides concentric operation.
- Distributor gear is ground to exact tolerances for tighter mesh with camshaft. (Bronze distributor gear available)
- High dielectric strength cap with brass terminals and low resistance center coil brush.
PerTronix – D1101 Flame-Thrower Distributor Hei Oldsmobile V8 Red Cap (Part No.D1101)
from
$355.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM
Product Features:
See More
Product Features:
- New lightweight aluminum alloy housing.
- Aligned and honed high quality bronze sintered bushings for reduced friction and extended life.
- Centerless ground corrosion resistant shaft reduces friction and provides concentric operation.
- Distributor gear is ground to exact tolerances for tighter mesh with camshaft. (Bronze distributor gear available)
- High dielectric strength cap with brass terminals and low resistance center coil brush.
MSD Ignition – Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI (Part No.31199)
from
$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)
from
$73.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)
from
$73.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
Carquest Premium – Spark Plug Wire Set (Part No.35-8113)
from
$34.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del
Product Features:
See More
Product Features:
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Oldsmobile Jetfire Ignition and Tune-Up Products Categories
Helping You Find the Right Ignition and Tune-Up Products for Your Oldsmobile Jetfire
You love your Jetfire. So we’ve made it easier than ever to help you find Oldsmobile Jetfire Ignition and Tune-Up Products in our online catalog. Our inventory holds 65 aftermarket and OEM Ignition and Tune-Up Products for your Oldsmobile Jetfire, ranging from $2.49 to $355.99.
We offer parts from 11 brands trusted to make quality Ignition and Tune-Up Products for your Oldsmobile Jetfire. Before you buy, take some time to read through customer reviews. We currently have 169 reviews of Oldsmobile Jetfire Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Super Stock Coil Chrome with 4.0 stars and Distributor Rotor with 4.6 stars.
Find your Jetfire Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Oldsmobile Jetfire part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Ignition and Tune-Up Products Brands for Your Oldsmobile Jetfire
Our inventory holds Ignition and Tune-Up Products for your Oldsmobile Jetfire from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Accel, and NGK, all of which can keep that Oldsmobile happy.
We have Carquest Premium parts available for your Oldsmobile Jetfire in categories like Ignition Coils and Boots. Some of the top-rated Carquest Premium parts in these categories are:
Top-Rated Accel Ignition and Tune-Up Products
Leading Accel Ignition and Tune-Up Products
We carry Accel brand parts for your Oldsmobile Jetfire across several catalog categories, including Ignition Boots and Ignition Wires. Some of our most reviewed Accel parts include:
FAQs for Oldsmobile Jetfire Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the Oldsmobile Jetfire?
Out of 65 Ignition and Tune-Up Products for the Oldsmobile Jetfire, the most popular in our inventory are:
from
$52.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
from
$41.49
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
What are the top-rated Oldsmobile Jetfire Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your Oldsmobile Jetfire based on customer reviews/ratings are:
from
$101.99
(5)
8Mm Super Stock Spiral Uni Bk
“I’m very happy with my 8mm spiral wires from Accel. Installed in a 94 deville 4.9 and it looks like a factory install other than the labeled wires. My”
