Oldsmobile Cutlass Salon Wheels and Tires
Top Oldsmobile Cutlass Salon Wheels and Tires Categories
We carry over 88 Wheels and Tires in inventory for the Oldsmobile Cutlass Salon. If you’re looking for aftermarket Wheels and Tires for your Oldsmobile Cutlass Salon, check out all these categories:
Essential Oldsmobile Cutlass Salon Wheels and Tires
Dorman – Wheel Lug Nut Cover: M24-2.0 Thread, 3/4" Hex, 1.74 in Depth (Sold by each) (Part No.611-632)
from
$7.99
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
KAI – Wheel Cover (Part No.GMK4534588751)
from
$139.99
New Goodmark Wheel Center Cap, Super Stock II Or III Wheel, Red Rocket, With Retainer Type Retention, Fits All Super Stock Wheels Except 1985-87 442 With Gold 442 On Black Background
Product Features:
See More
Product Features:
- Super Stock II Or III Wheel Red Rocket With Retainer Type Retention Fits All Super Stock Wheels Except 1985-87 442 With Gold 442 On Black Background
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
National – Wheel Seal (Part No.8660S)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-8660S)
from
$7.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Wheel Lug Nut and Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.375" L, Black Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-346)
from
$44.99
Secure your wheels with this precision-engineered wheel lock set, designed to replace factory wheel nuts with attractive, corrosion-resistant locking nuts. Crafted from high-quality materials, this set is built to strict specifications and rigorously tested for durability, including try-on and corrosion resistance testing, ensuring reliable performance and a long service life. With various sizes, quantities, and appearances available, you can find the perfect fit for your vehicle by checking the product attributes. Backed by a team of U.S.-based product experts with over a century of automotive experience, this standard replacement grade set offers trustworthy quality and peace of mind. Protect your investment while enhancing your vehicle’s appearance with this durable and secure solution.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Rigorously tested reliability subjected to try-on and corrosion resistance testing to ensure dependable performance under various conditions.
Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key (Part No.711-355)
from
$41.99
Protect your wheels with this precision-engineered wheel lock set, designed to replace standard factory nuts with secure, corrosion-resistant locking nuts. Crafted from high-quality materials and rigorously tested for durability and corrosion resistance, this set ensures long-lasting performance and peace of mind. With various sizes, quantities, and styles available, you can find the perfect fit and appearance for your vehicle. Whether you’re upgrading or replacing, this standard replacement set offers a reliable anti-theft solution backed by a team of U.S.-based experts with over a century of automotive experience.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Engineered for precision – designed to seamlessly replace factory nuts, this wheel lock set ensures a secure fit while maintaining the integrity and appearance of your vehicle’s wheels.
Dorman – Wheel Lug Nut and Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.406" L, Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-341)
from
$42.49
Secure your wheels with this precision-engineered wheel lock set, designed to replace factory wheel nuts with attractive, corrosion-resistant locking nuts. Crafted from high-quality materials and rigorously tested for durability and corrosion resistance, this set ensures reliable performance and a long service life. Featuring a conical seat type for a secure fit, it offers a standard replacement grade that meets strict specifications. With various sizes, quantities, and appearances available, you can find the perfect match for your vehicle by checking the product attributes. Backed by a team of U.S.-based product experts with over a century of automotive experience, this wheel lock set delivers trustworthy quality and peace of mind against theft.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Engineered for precision – designed with a conical seat type to ensure a secure and reliable fit, providing optimal compatibility and stability for your vehicle’s wheels.
National – Multi-Purpose Seal (Part No.8871)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: springless; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Schaeffler – Shaft Seal (Part No.SS3045)
from
$4.19
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Driveworks – Oil Seal (Part No.S-8871)
from
$7.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
McGard – Chrome Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24137)
from
$35.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24012)
from
$44.49
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use under wheel covers, center caps and hub caps.
- Can also be used for exposed applications with optional (70005) black or (70006) chrome caps.
McGard – Chrome Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.25257)
from
$56.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
McGard – Black Cone Seat Bulge Style Lug Nuts (M12 x 1.5 Thread Size) – Box of 144 Lug Nuts (Part No.69415)
from
$858.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Bulk box of 144.
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.378" Length, Chrome, 1 Pack (Part No.611-100.1)
from
$3.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M12-1.50 Thread, Flanged, Cragar SST Mag, 2.25" Length, Chrome (sold by each) (Part No.611-184)
from
$3.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Schaeffler – Bearing – TRB (Tapered Roller Bearing) (Part No.KT34)
from
$16.99
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
National – Drive Axle Shaft Repair Bearing (Part No.RP-5707)
from
$51.99
Designed to be used on worn axle shafts, National axle repair bearings are manufactured with premium materials for durability and long-lasting performance.
Product Features:
See More
Product Features:
- REPAIRS AXLE BEARINGS – Enables a worn axle shaft to be reused by shifting the bearing element contact surface on the axle
- PREMIUM MATERIALS – Precision manufactured using high-quality materials for durability and performance
- KEEPS DIRT OUT – Premium double-seal design keeps out dirt and contaminants while retaining lubrication in bearing
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
McGard – SplineDrive Lug Nut Installation Tool for McGard SplineDrive Lug Nuts (Part No.65300)
from
$16.49
SplineDrive Installation tool for use only with McGard SplineDrive lug nuts with a 1/2-20, M12x1.25 or M12x1.5 thread size. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- For use only with McGard SplineDrive lug nuts with a 1/2-20, M12x1.25 or M12x1.5 thread size.
- Installation Tool has 13/16″ Hex Size
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.4" Length, Chrome, 4 Pack (Part No.711-309)
from
$13.49
Engineered for precision and reliability, these wheel lug nuts are crafted to seamlessly match the fit, function, and performance of original equipment hardware on specified vehicles. Built with durable materials and manufactured to strict specifications, they ensure a long service life and dependable performance under demanding conditions. With a standard replacement grade type, these lug nuts are available in various sizes and assortments, making it easy to find the perfect fit for your application – just check the product dimensions to ensure compatibility. Backed by a team of U.S.-based product experts with over a century of automotive experience, these lug nuts deliver trustworthy quality and exceptional value. The durable chrome finish not only enhances longevity but also adds a sleek, polished look to your wheels.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
- The durable chrome finish not only provides long-lasting protection against corrosion but also enhances the aesthetic appeal of your wheels with a sleek, polished look.
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831" Length, Chrome (sold by each) (Part No.611-183)
from
$3.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
National – Bearing (Part No.LM67048)
from
$7.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.A-34)
from
$16.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-34)
from
$6.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Oldsmobile Cutlass Salon Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your Oldsmobile Cutlass Salon
You love your Cutlass Salon. So we’ve made it easier than ever to help you find Oldsmobile Cutlass Salon Wheels and Tires in our online catalog. Our inventory holds 88 aftermarket and OEM Wheels and Tires for your Oldsmobile Cutlass Salon, ranging from $2.49 to $858.99.
We offer parts from 6 brands trusted to make quality Wheels and Tires for your Oldsmobile Cutlass Salon. Before you buy, take some time to read through customer reviews. We currently have 7,197 reviews of Oldsmobile Cutlass Salon Wheels and Tires from previous customers. Some of the top rated parts include Wheel Seal with 4.6 stars and Multi-Purpose Bearing with 4.9 stars.
Find your Cutlass Salon Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Oldsmobile Cutlass Salon part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your Oldsmobile Cutlass Salon
Our inventory holds Wheels and Tires for your Oldsmobile Cutlass Salon from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Driveworks, and National, all of which can keep that Oldsmobile happy.
We have Driveworks parts available for your Oldsmobile Cutlass Salon in categories like Wheel Seals and Wheel Bearings. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Dorman Wheels and Tires
Leading Dorman Wheels and Tires
We carry Dorman brand parts for your Oldsmobile Cutlass Salon across several catalog categories, including Wheel Hardware. Some of our most reviewed Dorman parts include:
from
$8.99
(59)
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.375 in Length, Chrome, 4 Pack
Custom Wheel Lug nuts
from
$41.99
(22)
Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key
Custom Wheel Lug Nut and Lock Sets
from
$3.49
(21)
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.378" Length, Chrome, 1 Pack
Wheel Lug Nuts
FAQs for Oldsmobile Cutlass Salon Wheels and Tires
What are the most purchased Wheels and Tires for the Oldsmobile Cutlass Salon?
Out of 88 Wheels and Tires for the Oldsmobile Cutlass Salon, the most popular in our inventory are:
from
$2.99
This product is not rated
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome (sold by each)
Wheel Lug Nuts
from
$3.49
This product is not rated
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831" Length, Chrome (sold by each)
Custom Wheel Lug nuts
What are the top-rated Oldsmobile Cutlass Salon Wheels and Tires?
Top-rated Wheels and Tires for your Oldsmobile Cutlass Salon based on customer reviews/ratings are:
