Oldsmobile Cutlass Cruiser Performance Exhaust Products
Your One-Stop Shop For Trusted Oldsmobile Cutlass Cruiser Performance Exhaust Products
If you’re in search of Oldsmobile Cutlass Cruiser Performance Exhaust Products aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 23 Performance Exhaust Products from top brands with prices ranging from $25.99 to $749.99.
Beyond great prices, we stock trusted brands manufacturing all types of Performance Exhaust Products for your Oldsmobile Cutlass Cruiser.
And don’t forget to read customer reviews across all Performance Exhaust Products categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.
At Advance Auto Parts, we don’t think top quality Performance Exhaust Products have to cost top dollar, and we prove it. Browse our top Oldsmobile Cutlass Cruiser Performance Exhaust Products below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.
Essential Oldsmobile Cutlass Cruiser Performance Exhaust Products
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)
from
$134.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)
from
$184.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842448)
from
$136.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Mr. Gasket – Alternator Bracket (Part No.5170)
from
$44.99
Original equipment style bracket in high quality chrome for years of service. Includes hardware.
Product Features:
See More
Product Features:
- Chrome Plated Heavy Gauge Steel
- Can Be Used For Other Applications
- Looks Better Than Painted
- Hardware included
Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)
from
$46.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Reusable header, exhaust manifold and collector flange gaskets
- Resists Deteriorating
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Easy Removal For Disassembly
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Mr. Gasket – Exhaust Gasket Set (Part No.150)
from
$34.99
Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.
Product Features:
See More
Product Features:
- High-Temperature Exhaust Material
- Withstands Extreme Exhaust Heat
- Provides Excellent Sealing And Durability
- Superior Tensile Strength
- Resists Deteriorating
- Provides Excellent Torque Retention
Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7152G)
from
$69.99
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
Mr. Gasket – Ultra-Seal Exhaust Gaskets – Hi-Temp Graphite – Small Block Chevy Oval Port – 1.50"W X 1.82"H (Part No.5917)
from
$49.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5907)
from
$34.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)
from
$34.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Hooker Headers – Aero Chamber Muffler (Part No.21501HKR)
from
$132.99
The polished stainless steel Aero Chamber is designed to do much more than simply muffle exhaust noise. The Aero Chamber Muffler produces a deep throaty powerful sound that will not change with time. The Hooker Aero Chamber uses a unique step principal, similar to that which is currently popular in racing header design. The aerodynamically designed chambers flow 23 percent better and produce more horsepower and torque than the most popular high performance brand. The stainless steel construction assures good looks, corrosion protection ang long life.
Product Features:
See More
Product Features:
- All Aluminized/Stainless Steel
- Deep Throaty Powerful Sound
- 23 percent More Flow Than Others
- More Horsepower And Torque
- Sound Absorption Chamber
- Stepped Acceleration Chamber
Flowtech – Afterburner; Headers (Part No.49100FLT)
from
$423.99Product Features:
- Innovative New Design
- Increase Horsepower/Torque
- Formed From Stainless Steel
- Premium High Temp Gray Finish
- Large 3in. Secondary Collector
- Increase Scavenging
- Smooth Exhaust Pulses
Flowtech – Standard Header with Enhanced Fuel Efficiency and Leakproof Technology (Part No.11108FLT)
from
$229.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – Competition Header (Part No.2466-1HKR)
from
$749.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Competition Header (Part No.2466HKR)
from
$299.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Dynomax – Exhaust System Kit (Part No.89017)
from
$277.99
Give your vintage vehicle’s exhaust system an upgrade with a DynoMax dual header kit. Designed to attach with OE headers, it features a special reducer that allows for a variety of mounting options.
Product Features:
See More
Product Features:
- COMPATIBILITY : Designed for 1978-1987 midsize sedans such as Oldsmobile Cutlass, Chevrolet Monte Carlo, Buick Regal and Pontiac Grand Prix; see product information for compatibility and engine specifications
- BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
- FLEXIBLE MOUNTING : Special reducer design allows for a variety of mounting options
- IMPROVED FLOW CAPACITY : Smooth bends improve flow capacity over traditional bends
- SPECS : Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on each side of vehicle at rear bumper
- COMPLETE SOLUTION : Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
- PREMIUM MATERIALS: Made from quality aluminized steel for durability and long life
- BETTER TOGETHER : Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
- WARNING : Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use
Oldsmobile Cutlass Cruiser Performance Exhaust Products List
Performance Exhaust Products Brands You Can Trust For Your Oldsmobile Cutlass Cruiser
6 trusted brands of Performance Exhaust Products line our shelves, ready to help keep your Oldsmobile Cutlass Cruiser running smooth. Below are some of the most popular brands and their top Performance Exhaust Products offerings:
Popular FEL-PRO Performance Performance Exhaust Products
FEL-PRO Performance products for the Oldsmobile Cutlass Cruiser span several categories. Some of the highest-rated FEL-PRO Performance Performance Exhaust Products that will fit your Oldsmobile Cutlass Cruiser are:
Top Oldsmobile Cutlass Cruiser Performance Exhaust Products from Flowmaster Inc.
Your Oldsmobile Cutlass Cruiser will be purring again thanks to Flowmaster Inc. brand Performance Exhaust Products available for online order or in-store pick up. Popular Flowmaster Inc. parts include:
from
$99.99
(3)
40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$134.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$184.99
(1)
50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
Performance Exhaust Mufflers
Most Purchased Oldsmobile Cutlass Cruiser Performance Exhaust Products from Flowmaster Inc.
When you buy the most frequently purchased Flowmaster Inc. brand Performance Exhaust Products, you can be confident it will be the right part for your Oldsmobile Cutlass Cruiser. Here are the Flowmaster Inc. Performance Exhaust Products Advanced Auto customers buy the most:
from
$99.99
(3)
40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$46.99
This product is not rated
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
Performance Exhaust Manifold Gaskets
from
$134.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
FAQs for Oldsmobile Cutlass Cruiser Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the Oldsmobile Cutlass Cruiser?
Out of 23 Performance Exhaust Products for the Oldsmobile Cutlass Cruiser, the most popular in our inventory are:
from
$46.99
This product is not rated
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
Performance Exhaust Manifold Gaskets
What are the top-rated Oldsmobile Cutlass Cruiser Performance Exhaust Products?
Top-rated Performance Exhaust Products for your Oldsmobile Cutlass Cruiser based on customer reviews/ratings are:
from
$132.99
(2)
Aero Chamber Muffler
“I like a certain amount of old school correctness in the aftermarket parts on my 1970 Bronco. I purchased the Hooker Dual Exhaust setup with Hooker A”
