Oldsmobile Bravada Engine Control Modules (ECM)

CARDONE® Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

• Tested with automated, computerized equipment or bench-tested, depending on application, to ensure functionality.
• Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
• On-car vehicle validation is done to test durability and performance.
• Meets O.E. fit and function

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

• BSE Remanufactured Body Control Modules are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
• OEM Modules are completely disassembled, cleaned, and inspected for wear & damage.
• Worn and non-functioning components are replaced with upgraded new components to improve reliability and performance.
• Common fail components are 100% replaced with new higher quality components.
• All modules are 100% tested to meet or exceed OEM performance specifications.

GM Genuine Parts Body Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They communicate with other systems in your vehicle to regulate electronic devices. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This remanufactured body control module (BCM) is thoroughly tested and refurbished as required to restore various accessory functions and prevent damage to related components.

Product Features:

• Thoroughly remanufactured – this body control module has been rebuilt in a dedicated electronics manufacturing facility in North America
• Durable construction – this control module has been thoroughly refurbished for reliable performance
• Cost-effective solution – offers original equipment quality at a better price than a new part
• Quality tested – this module has been individually tested to confirm function and performance

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

• BSE Engine Control Computers are remanufactured to perform 100% like new components. OEM designs are analyzed, and where applicable, design upgrades are implemented to provide improved durability over the OEM design.
• 100% of critical component connections are re-soldered to ensure optimum electrical connections and improved reliability.
• We use automated computerized test equipment to ensure functionality and reliability.
• All parts are Original Equipment Manufacturer parts are restored back to OEM specifications for OE fit form and function.

GM Genuine Parts Remanufactured Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and referencing that information back to other sensors, modules, and areas of the vehicle. Remanufacturing the engine control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and completed units are tested to help ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

• Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
• Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
• On-car vehicle validation is done to test durability and performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

• BSE Engine Control Computers are remanufactured to perform 100% like new components. OEM designs are analyzed, and where applicable, design upgrades are implemented to provide improved durability over the OEM design.
• 100% of critical component connections are re-soldered to ensure optimum electrical connections and improved reliability.
• We use automated computerized test equipment to ensure functionality and reliability.
• All parts are Original Equipment Manufacturer parts are restored back to OEM specifications for OE fit form and function.

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

• BSE Engine Control Computers are remanufactured to perform 100% like new components. OEM designs are analyzed, and where applicable, design upgrades are implemented to provide improved durability over the OEM design.
• 100% of critical component connections are re-soldered to ensure optimum electrical connections and improved reliability.
• We use automated computerized test equipment to ensure functionality and reliability.
• All parts are Original Equipment Manufacturer parts are restored back to OEM specifications for OE fit form and function.

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

• Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
• Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
• On-car vehicle validation is done to test durability and performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

• Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
• Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
• On-car vehicle validation is done to test durability and performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

• Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
• Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
• On-car vehicle validation is done to test durability and performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

GM Genuine Parts Remanufactured Vehicle Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They regulate various parts of your vehicle’s engine. Remanufacturing the vehicle control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and completed units are tested to help ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle