Oldsmobile Bravada Drive Shafts and Axles

Inner axle retaining snap ring for 7.2″ GM.

Product Features:

• Stub axle snap ring
• Fits GM 7.2″ IFS

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.

Product Features:

• Includes axle bearing and seal
• Services one side
• Torrington Brand
• 2.250″ O.D.
• 1.400″ I.D.

Upgrade and simplify your driveshaft replacement with a premium driveshaft that’s delivered fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years. Engineered and manufactured in the USA, the driveshaft is manufactured from high-precision, drawn over mandrel (DOM) seamless steel tubing that offers superior concentricity, uniform wall thickness and greater torsional strength and dent resistance than standard welded steel. The assembly includes 100% new-not remanufactured-components, including yokes, CV joints and U-joints. A premium quality driveshaft assembly deserves premium packaging; this product ships in protective foam-in-place packaging to ensure it arrives in the same pristine, install-ready condition in which it left the manufacturing facility.

Product Features:

• Ready to install – this premium driveshaft assembly arrives fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years
• Premium shaft – made from drawn over mandrel (DOM) seamless steel tubing for superior concentricity, uniform wall thickness and more torsional strength and dent resistance than standard welded steel
• All-new construction – built in the USA with 100% new-not remanufactured-tubing, yokes, CV joints, and U-joints
• Superior packaging – assembly ships in protective foam-in-place packaging to ensure it is delivered in the same pristine, install-ready condition in which it left the manufacturing facility

7.2IFS GM 01 & up Envoy disconnect housing seal.

Product Features:

• Disconnect housing seal
• Fits 2001 and up GM 7.2″ IFS in GMC Envoy

All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:

• High moly CV joint grease with stainless-steel boot bands

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• c-clip for GM 7.5″, 7.625″ and 8.0″

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST – Advanced heat treatment process for strength
• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

An imperative replacement part for the proper functioning of the axle shaft and for basic vehicle operation, our Axle Shaft Lock C-Clips are made from quality materials for long-lasting durability.

Product Features:

• Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.

Product Features:

• Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
• Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
• Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Manufactured with premium materials, National needle bearings are designed and engineered to meet OE specifications.

Product Features:

• RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
• PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

GM Genuine Parts Axle Shaft Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support and allow the axle shaft to rotate with minimal friction. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Supports and allows the axle shaft to rotate with minimal friction
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Thrust washer kit
• Fits GM 7.2″ IFS

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
• Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
• Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN — Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.

Product Features:

• Pinion Redi-sleeve
• Fits GM 7.5″, 7.625″ and 8.2″

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

Product Features:

• Fits GM 8.0″
• 27 spline
• Mechanics 3R u-joint size
• Inside snap ring design
• 2.556″ snap ring span
• 1.125″ cap diameter
• Strap style

Drive shaft slip yoke vibrating, clunking or failed completely- This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
• Effective fix – replacement restores safe, smooth driveline operation
• Rigorously tested – designed and evaluated to assure safe, reliable operation
• Trustworthy quality – backed by team of engineers and inspectors in the United States

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

Product Features:

• Fits GM 7.5″ and 7.625″
• 27 spline
• Mechanics 3R u-joint size
• Inside snap ring design
• 2.556″ snap ring span
• 1.125″ cap diameter
• Strap style

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Anchor 6056 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features: