from

$69.99

The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.

Product Features:

OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.

from

$16.49

This throttle position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this throttle position sensor connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.99

The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:

Multi-Color
Plastic Material
Fits Holley® 2300, 4150, And 4160 Carburetors
Set of 8
Made In The USA

from

$7.99

This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.29

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$33.99

Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:

Rubber Material
For Holley®, Barry Grant, And Demon Gasoline Carburetors
No Hardware Included
50cc Volume
Made iIn The USA

from

$14.99

The Edelbrock 94 No. 12474 Carburetor Jets .074″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

from

$66.99

Product Features:

Customize Carburetor Calibration and Performance
Owners Manual has Assembly Help
Includes Metering Rod Retaining Spring
Includes Metering Rods
Includes Metering Jets
Includes Step-Up Springs

from

$30.49

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers

Product Features:

Zinc plated Grade 5 steel
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Ideal For Minimal Space
12-Point Head And Flange
Zinc Plated For Protection

from

$14.99

The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:

Fits Holley® Carburetors With Center Hung Fuel Bowl
Includes Adjusting Nut
Includes Locking Screw
Includes O-Ring
Includes Washers

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$58.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

Product Features:

Application matched components ensure carburetor can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$401.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
Not for C-3 and C-4 Electronic Fuel Mngmt Systems

from

$115.99

Withstanding harsh environments, while sealing fuel, air, coolant, and oil, is the challenging task for intake manifold gaskets. Victor Reinz product coverage includes upper manifold (plenum) gaskets, lower intake manifold gaskets and additional gaskets and seals as required. Victor Reinz engineers choose from the worlds broadest range of gasket materials and constructions, and select the best design for the specific engine, whether it is import, domestic, heavy cast iron or lightweight aluminum.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Aluminized steel carrier with FKM molded rubber
Compression limiters to prevent overtightening
Superior sealing characteristics to competing designs

from

$28.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$310.99

Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

from

$22.99

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:

Center Hung Floats
0.11 in. Needle Diameter
Viton® Needle Material
Sold Individually
Non-Adjustable Type

from

$16.99

Product Features:

The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
Kit includes two black nitrile fuel bowl gaskets.

from

$20.99

The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block Type
Set of 4
Fits Holley® 4160 Carburetors
Made In The USA

from

$26.99

The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Product Features:

Steel Material
For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
Includes Lightest To Heavy
Set of 7
Made in The USA

from

$25.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.

from

$3.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

The Edelbrock No. 12685 Single Stage 8.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

from

$39.99

ACDelco GM Original Equipment Air Charge Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$50.99

Product Features:

Edelbrock triple chrome-plated round air cleaner #1223 work with all popular 5-1/8″ diameter Carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB).
The 10″ and 14″ models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter #1205 (sold separately).
#1208, #1209 and #1221 fit all Edelbrock Carburetors.
Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut.
Dimensions are accurate within 1/8″.