Nissan Versa Note Fuel and Emissions Systems

Please Select your Vehicle to See Exact Fit Parts

Essential Nissan Versa Note Fuel and Emissions Systems

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack

from

$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Multi-Use Connector (Part No.PTA3106)

Multi-Use Connector

from

$160.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0133)

Air Flow Sensor - New Actual OE Part

from

$220.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:
  • Hitachi is a Tier 1 OE supplier for air flow sensors
  • 100% NEW, never remanufactured
  • Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
  • Precision manufactured and assembled sensing elements for accurate air flow measurements
See More

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Fuel Cap Tester Adapter:

from

$17.79
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit, Wiring Harness and Strainer (Part No.M2528785)

Fuel Pump Module Assembly: Fuel Pump, Sending Unit, Wiring Harness and Strainer

from

$454.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$8.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

Fuel Injector O-Ring Kit

from

$8.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1082)

Vapor Canister Purge Solenoid

from

$96.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPA1401)

Vapor Canister Purge Solenoid: Includes Mounting Hardware

from

$205.99
Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.

Product Features:
  • Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
  • Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
  • Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
  • Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
  • Meets or exceeds all OEM specifications
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3794)

Remanufactured Fuel Injector

from

$61.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new o-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-331)

Evaporative Emissions Purge Solenoid Valve

from

$115.99
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.

Product Features:
  • Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

DENSO – Air-Fuel Ratio Sensor 4 Wire, Direct Fit, Heated, Wire Length: 12.36" (Part No.234-9303)

Air-Fuel Ratio Sensor 4 Wire, Direct Fit, Heated, Wire Length: 12.36"

from

$333.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
See More

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 10.51" Long, Heated, Exact Fit (Part No.234-9127)

Wideband Oxygen Sensor: Upstream, 4 Wire, 10.51" Long, Heated, Exact Fit

from

$215.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA2491)

Manifold Absolute Pressure Sensor (MAP)

from

$327.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1282)

Fuel Tank Pressure Sensor

from

$44.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

NTK – Switching Oxygen Sensor: 4 Wire, 14.5" Long, Heated, Direct Fit (Part No.24168)

Switching Oxygen Sensor: 4 Wire, 14.5" Long, Heated, Direct Fit

from

$98.99
NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15730)

Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal

from

$89.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

Bosch – Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit (Part No.18146)

Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit

from

$139.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Wideband Oxygen Sensor: 5 Wire, 14.4" Long, Heated, Exact Fit (Part No.18133)

Wideband Oxygen Sensor: 5 Wire, 14.4" Long, Heated, Exact Fit

from

$323.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Advanced Wideband sensing element for exact air/fuel measurement
  • Robust sensor design increases sensor longevity
  • Seared protection tube due to 100% functional quality test
  • True Direct-fit
  • Pre-coated threads with anti-seize compound right out of the box
See More

Carquest Premium – Vapor Canister Vent Solenoid: Includes Mounting Hardware (Part No.CPC1008)

Vapor Canister Vent Solenoid: Includes Mounting Hardware

from

$99.99
Product Features:
  • Provides closure for the EVAP system (normally vented) during OBD II test cycle
  • Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
  • Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
  • Meets or exceeds all OEM specifications
See More

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-504)

Evaporative Emissions Canister Vent Valve

from

$115.99
A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:
  • Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment function at a lower price
  • Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
See More

Helping You Find the Right Fuel and Emissions Systems for Your Nissan Versa Note

You love your Versa Note. So we’ve made it easier than ever to help you find Nissan Versa Note Fuel and Emissions Systems in our online catalog. Our inventory holds 45 aftermarket and OEM Fuel and Emissions Systems for your Nissan Versa Note, ranging from $7.99 to $492.99.

We offer parts from 11 brands trusted to make quality Fuel and Emissions Systems for your Nissan Versa Note. Before you buy, take some time to read through customer reviews. We currently have 13,687 reviews of Nissan Versa Note Fuel and Emissions Systems from previous customers. Some of the top rated parts include Locking Fuel Tank Cap with 4.3 stars and Locking Fuel Tank Cap with 4.6 stars.

Find your Versa Note Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan Versa Note part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your Nissan Versa Note

Our inventory holds Fuel and Emissions Systems for your Nissan Versa Note from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, FELPRO, and Bosch, all of which can keep that Nissan happy.
We have Dorman parts available for your Nissan Versa Note in categories like Vapor Canister Purge Valves. Some of the top-rated Dorman parts in these categories are:
Evaporative Emissions Canister Vent Valve
from $115.99
(2)
Evaporative Emissions Canister Vent Valve
Vapor Canister Vent Solenoids

Top-Rated Carquest Premium Fuel and Emissions Systems

Leading Carquest Premium Fuel and Emissions Systems

We carry Carquest Premium brand parts for your Nissan Versa Note across several catalog categories, including Gas Caps. Some of our most reviewed Carquest Premium parts include:
Non-Locking Fuel Tank Cap
from $15.49
(142)
Non-Locking Fuel Tank Cap
Gas Caps

FAQs for Nissan Versa Note Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the Nissan Versa Note?

Out of 45 Fuel and Emissions Systems for the Nissan Versa Note, the most popular in our inventory are:
Fuel Injector O-Ring Kit
from $8.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits

What are the top-rated Nissan Versa Note Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your Nissan Versa Note based on customer reviews/ratings are:
Locking Fuel Tank Cap
from $23.99
(35)
Locking Fuel Tank Cap
“It works great”
Locking Fuel Tank Cap
from $24.99
(32)
Locking Fuel Tank Cap
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”
Non-Locking Fuel Tank Cap
from $16.99
(25)
Non-Locking Fuel Tank Cap
“Will buy again”