Nissan Rogue Alternators and Starters

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Valeo’s premium alternator delivers exceptional performance and reliability, making it a top choice for automotive electrical systems. Built with 100% new components and core, this alternator eliminates the risk of premature failure, ensuring long-lasting durability compared to remanufactured units. Designed for an exact fit with application-specific parts, it features premium rare earth magnets that enhance output efficiency without increasing size. With a robust 120-amp rating and 12 VDC voltage, this alternator is engineered to handle demanding electrical loads while maintaining maximum charge output. Tested under extreme conditions for up to six months, it offers high resistance to heat, vibration, and contaminants, ensuring reliable operation in harsh environments. The clockwise rotation direction further supports seamless integration into your vehicle’s system. As the original equipment part now available in the aftermarket, Valeo’s alternator combines innovation and quality to boost fuel economy and eliminate voltage drops, delivering unmatched value and performance.

Product Features:

• Valeo premium alternators are 100% new products (not remanufactured)
• 100% new components and core eliminates premature failure for increased durability over remanufactured units
• All parts are application specific for an exact fit
• Premium rare earth magnets increase the output of the alternator without increasing the size for better efficiency
• All applications go under extreme condition testing up to 6 months to ensure reliability under the harshest conditions and electrical demands
• High resistance to heat, vibration, and contaminating particles helps maintain maximum charge output
• Part Number 849125 is the original equipment part now available in the aftermarket.

This 120-amp alternator from WAI is a top-tier choice for reliable performance and durability. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. Featuring advanced voltage regulator protection, it safeguards against transient voltage spikes, preventing potential battery damage while maintaining low heat dissipation. The high-power rectifier assembly, equipped with robust open junction press-fit diodes, keeps the unit running cool even under demanding conditions. Fully compliant with ECU communication, this alternator delivers seamless integration with your vehicle’s system. Each unit comes with a printed copy of test results, providing transparency and confidence in its performance from the very first use. Designed for long-lasting efficiency, this alternator is a dependable solution for your vehicle’s electrical needs.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
• High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
• Designed for long-lasting efficiency, this alternator ensures dependable performance to meet your vehicle’s electrical demands over time.

The Bosch Premium Alternator, delivering 110 amps and 12 VDC, is engineered for exceptional performance and reliability. Full-load tested to meet Bosch’s rigorous performance standards, this alternator ensures dependable operation under demanding conditions. Unlike rebuilt units, it is 100% factory-tested and remanufactured using high-quality materials and cutting-edge technology, offering superior durability and longevity. Designed with a clockwise rotation direction, it is built to seamlessly integrate with your vehicle’s electrical system. Whether you’re replacing a worn-out alternator or upgrading for better performance, this Bosch alternator provides unmatched value and peace of mind.

Product Features:

Product Features:
• Full-load tested to guarantee compliance with Bosch’s strict performance specifications
• 100% factory tested, units are remanufactured (not rebuilt)
• Built to last – uses high quality materials and the most technologically advanced developments.
• Seamlessly integrates with your vehicle’s electrical system for optimal compatibility and performance.
• Engineered for dependable operation under demanding conditions, ensuring reliability and peace of mind.

Alternator: New, 110 Amps by WAI delivers exceptional reliability and performance, engineered to meet or exceed OEM specifications for a seamless fit and hassle-free installation. Designed with advanced voltage regulator protection, it safeguards against transient voltage spikes, preventing potential battery damage while ensuring efficient communication with the ECU. Its low saturation voltage minimizes heat dissipation, enhancing durability and operational efficiency. The high-power rectifier assembly features robust open junction press-fit diodes, keeping the unit cool even under demanding conditions. Each alternator comes with a printed copy of test results, providing transparency and confidence in its performance from the very first use. With 110 amps of power, this alternator is built to handle the needs of modern vehicles, making it a reliable and value-packed choice for your aftermarket replacement.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
• High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
• Designed to deliver 110 amps of power, this alternator is optimized to meet the demands of modern vehicles, ensuring reliable performance and compatibility with advanced automotive systems.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:
• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Valeo’s premium alternator, delivering 120 amps at 12 VDC, is a standout choice for reliable electrical performance. Built entirely with new components, this alternator eliminates the risk of premature failure often associated with remanufactured units, ensuring long-lasting durability. Designed with application-specific parts for an exact fit, it integrates premium rare earth magnets to maximize output efficiency without increasing size. Tested rigorously under extreme conditions for up to six months, it guarantees reliability even in the harshest environments, resisting heat, vibration, and contaminants to maintain optimal charge output. With a clockwise rotation direction and original equipment quality, this Valeo alternator is now available in the aftermarket as Part Number 849149, offering unmatched compatibility and performance. Recognized for innovation, it enhances fuel economy and eliminates voltage drops, making it a smart investment for any vehicle’s electrical system.

Product Features:

• Valeo premium alternators are 100% new products (not remanufactured)
• 100% new components and core eliminates premature failure for increased durability over remanufactured units
• All parts are application specific for an exact fit
• Premium rare earth magnets increase the output of the alternator without increasing the size for better efficiency
• All applications go under extreme condition testing up to 6 months to ensure reliability under the harshest conditions and electrical demands
• High resistance to heat, vibration, and contaminating particles helps maintain maximum charge output
• Part Number 849149 is the original equipment part now available in the aftermarket.

Bosch Premium Starters deliver exceptional performance and reliability, making them a trusted choice for your vehicle’s ignition system. Engineered with precision, this remanufactured starter features a counterclockwise rotation and a 13-tooth design, ensuring seamless compatibility with your engine’s requirements. Operating at 12 VDC, it provides consistent power to start your vehicle efficiently, even in demanding conditions. Built to meet rigorous testing standards, this starter combines durability with dependable functionality, offering long-lasting value for your investment. Whether you’re replacing a worn-out starter or upgrading for enhanced performance, Bosch Premium Starters are designed to keep your vehicle running smoothly.

Product Features:

Product Features:
• Remanufactured design ensures high-quality performance while reducing environmental impact.
• Precision-engineered for seamless compatibility with your engine’s specific requirements.
• Operates at 12 VDC to deliver consistent and reliable power for efficient vehicle starts.
• Built to meet rigorous testing standards, ensuring durability and dependable functionality.
• 13-tooth configuration and counterclockwise rotation provide optimal performance for your ignition system.

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
• Armatures have precision machined and upgraded steel shaft for improved durability and performance.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
• Armatures have precision machined and upgraded steel shaft for improved durability and performance.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:
• Designed to meet or exceed OE specifications for fit, form and function
• Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
• All new components are utilized to ensure long service life
• Internal electronics are upgraded for heavy duty reliability (where applicable)
• Armatures and commutators are 100% load tested
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

This Litens supplied OAP is manufactured by the original equipment (O.E.) manufacturer. This replacement pulley is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Under rapid engine deceleration, the pulley disengages the alternator from the belt drive system, allowing the alternator to freewheel, re-engaging when the RPM increases. The OAP alternator pulley ensures smooth, quiet performance. The OAP is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component. Under normal driving conditions, the original pulley will require replacement in approximately 70,000 – 90,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Original Equipment Design
• Protects the front-end accessory drive components
• New seal cap included with the OAP (Always ensure the cap is installed after installation)
• Tools Required – 17mm Spline Bit Driver (included)
• Installation instructions included

This Litens supplied OAP is manufactured by the original equipment (O.E.) manufacturer. This replacement pulley is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Under rapid engine deceleration, the pulley disengages the alternator from the belt drive system, allowing the alternator to freewheel, re-engaging when the RPM increases. The OAP alternator pulley ensures smooth, quiet performance. The OAP is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component. Under normal driving conditions, the original pulley will require replacement in approximately 70,000 – 90,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

ALT DECOUPLER PULLEY

ALT DECOUPLER PULLEY