Nissan Pathfinder Body Parts

Essential Nissan Pathfinder Body Parts

Carquest Premium – Multi-Use Connector (Part No.PTC1134)

Multi-Use Connector

from

$42.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Hood Release Cable with Handle (Part No.912-215)

Hood Release Cable with Handle

from

$49.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Fender Line Retainer Head Dia. 0.78 In. Shank Long 0.47 In. Hole Dia. 0.3 In. (Part No.963-545)

Fender Line Retainer Head Dia. 0.78 In. Shank Long 0.47 In. Hole Dia. 0.3 In.

from

$4.99
Dorman offers a comprehensive line of quality hardware for a range of automotive applications. They are available in a large variety of screw sizes, throat depths, panel ranges and assortments. This fastener or assortment is designed to match the performance of the original hardware on specified vehicles. Check the product dimensions and styles to select the right fastener or assortment for your application

Product Features:
  • Direct replacement – this fastener or assortment is designed to match the performance of the original hardware on specified vehicles
  • Ensure fit – check product dimensions and styles to select the right fastener or assortment for your application
  • Easy to install – no special tools required during installation
  • Conveniently packaged – choose from packaging with a range of convenient piece counts
See More

ARIES – 3 Inch Bull Bar (Part No.35-9002)

3 Inch Bull Bar

from

$275.99
The ARIES 3″ bull bar is made for those who face the uncertain road without fear. This particular model is constructed from 304 stainless steel. 304 stainless is high in nickel content, allowing the bull bar to easily resist water, road salt and rust and maintain its mirror-like polished finish in spite of the elements. Other available finishes include high-gloss black stainless steel, textured black steel and semi-gloss black steel. Customizing the look of your vehicle is simple with the ARIES 3″ bull bar. It is equipped with pre-drilled light mounting holes and a removable skid plate. The center crossbar features two pre-drilled holes that readily accept an LED light bar or two LED work lights. The skid plate is made from 304 stainless steel and has a brushed finish to stop rust and hide scratches and scuffs. It also features an aggressive, ARIES-exclusive cutout pattern and can be removed for a customized look. Each ARIES 3″ bull bar is made a vehicle-specific design, meaning that for each make and model, the bull bar has a custom bend and unique mounting brackets. This allows for the best possible fit on your vehicle and ensures solid attachment. The brackets also use pre-existing factory holes in the vehicle’s frame to eliminate drilling, speed up installation and increase rigidity. This bull bar fits select model years of the Nissan Frontier, Pathfinder and Xterra (see application info to verify fitment).

Product Features:
  • 3″ diameter, heavy-wall tube design
  • 304 stainless steel construction to be strong and truly rust-resistant
  • Mirror-like polished stainless steel finish for a bright, clean accent
  • Two pre-drilled holes in the crossbar for mounting LED light bars or work lights
  • Removable, brushed 304 stainless steel skid plate deflects small road debris
  • No-drill, vehicle-specific application for a custom fit
See More

KAI – Fender Splash Shield (Part No.NI1250114)

Fender Splash Shield

from

$11.99
New Standard Replacement Driver Side Fender Liner/Splash Shield, Front Section

Product Features:
  • Front Section, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Exterior Door Handle (Part No.NI1310111)

Exterior Door Handle

from

$19.99
New Standard Replacement Driver Side Front Exterior Door Handle, Black

Product Features:
  • Black, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Window Handle (Part No.722MX)

Window Handle

from

$6.99
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:
  • Ideal replacement – this window crank handle matches the fit and function of the original equipment component
  • Durable construction – this window crank handle is made of durable material to withstand extended use
  • Easy to install – this window crank requires no special tools to install
  • Versatile design – this window crank handle is suitable for use in various locations in the vehicle
See More

KAI – Hood Panel (Part No.NI1230170V)

Hood Panel

from

$604.99
New Economy Replacement Hood Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Insulation Retainer Head Dia. 1.09 In. Shank Long 0.41 In. Hole Dia. 0.12 In. (Part No.963-556)

Insulation Retainer Head Dia. 1.09 In. Shank Long 0.41 In. Hole Dia. 0.12 In.

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Bumper Impact Absorber (Part No.NI1170144C)

Bumper Impact Absorber

from

$38.99
New CAPA Certified Premium Replacement Rear Bumper Impact Absorber

Product Features:
  • Made Of Expanded Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Nissan Fender Liner Retainer (Part No.961-307D)

Nissan Fender Liner Retainer

from

$4.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:
  • Constructed of high-quality materials for long-lasting durability
  • Many different styles are available, including threaded and wide panel
  • Packaged in a variety of piece counts for use with both small and large projects
  • Also suitable for a broad range of industrial and commercial uses
See More

Carquest Premium – Door Mirror Switch (Part No.RMA1179)

Door Mirror Switch

from

$84.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Dorman – Mirror Assembly: Power Adjustment, Heated, 1 Pack (Part No.955-1639)

Mirror Assembly: Power Adjustment, Heated, 1 Pack

from

$129.99
This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

Product Features:
  • Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
  • Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
  • Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
  • Easy installation – no special tools or equipment is necessary for installing this new part
See More

Carquest Premium – Multi-Use Connector (Part No.PTC1519)

Multi-Use Connector

from

$48.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

KAI – Bumper Face Bar (Part No.NI1002101V)

Bumper Face Bar

from

$213.99
New Economy Replacement Front Bumper, Center Section Of Three Piece Design, Chrome, Up To Production Date 11/1995

Product Features:
  • Center Section Of Three Piece Design, Chrome, Up To Production Date 11/1995, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.NI1236172)

Hood Hinge

from

$22.99
New Standard Replacement Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Hood Latch Assembly (Part No.820-805)

Hood Latch Assembly

from

$79.99
Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:
  • Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
  • Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
  • Easy installation – requires no special tools to replace
  • Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service
See More

Atlas Lift – Lift Support (Part No.LS10114)

Lift Support

from

$29.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications. Always replace in Pairs, where applicable.
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
  • Trilingual Install Instructions provided inside each package
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.752-982)

Window Regulator: Power, 1 Pack

from

$114.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Fuel Door Actuator (Part No.746-975)

Fuel Door Actuator

from

$270.99
This fuel filler door lock actuator is designed to match the appearance and function of the original part on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel filler door lock actuator is made to match the fit and performance of the original part on specific vehicle applications
  • Ideal solution – this actuator is a reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk (Part No.NI1320168)

Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk

from

$64.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Power Door Mirror, SE Model With Off Road Package, Smooth Black. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Smooth Black, SE Model With Off Road Package, Flat Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Push-Type Retainer – Nissan – 10mm Hole (sold by each) (Part No.700-656)

Push-Type Retainer - Nissan - 10mm Hole (sold by each)

from

$1.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Window Defroster Switch (Part No.SBA4818)

Window Defroster Switch

from

$44.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

KAI – Bumper/Body Fill Panel (Part No.NI1089105)

Bumper/Body Fill Panel

from

$17.99
New Standard Replacement Passenger Side Filler Panel, From 12/1998 Production Date, Paint To Match, Plastic

Product Features:
  • From 12/1998 Production Date, Paint To Match, Plastic, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Integrated Door Lock Actuator (Part No.937-942)

Integrated Door Lock Actuator

from

$271.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Helping You Find the Right Body Parts for Your Nissan Pathfinder

You love your Pathfinder. So we’ve made it easier than ever to help you find Nissan Pathfinder Body Parts in our online catalog. Our inventory holds 232 aftermarket and OEM Body Parts for your Nissan Pathfinder, ranging from $0.79 to $604.99.

We offer parts from 20 brands trusted to make quality Body Parts for your Nissan Pathfinder. Before you buy, take some time to read through customer reviews. We currently have 1,890 reviews of Nissan Pathfinder Body Parts from previous customers. Some of the top rated parts include Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc with 4.0 stars and Exterior Door Handle with 3.7 stars.

Find your Pathfinder Body Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan Pathfinder part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Body Parts Brands for Your Nissan Pathfinder

Our inventory holds Body Parts for your Nissan Pathfinder from 20 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, StrongArm, and KAI, all of which can keep that Nissan happy.
We have Dorman – Help parts available for your Nissan Pathfinder in categories like Vehicle Latches and Handles. Some of the top-rated Dorman – Help parts in these categories are:
Exterior Door Handle
from $25.99
(1)
Exterior Door Handle
Exterior Door Handles
Interior Door Handle Front Rear Left Chrome
from $34.99
(1)
Interior Door Handle Front Rear Left Chrome
Interior Door Handles

Top-Rated StrongArm Body Parts

Leading StrongArm Body Parts

We carry StrongArm brand parts for your Nissan Pathfinder across several catalog categories, including Vehicle Hoods. Some of our most reviewed StrongArm parts include:

FAQs for Nissan Pathfinder Body Parts

What are the most purchased Body Parts for the Nissan Pathfinder?

Out of 232 Body Parts for the Nissan Pathfinder, the most popular in our inventory are:
Nissan Fender Liner Retainer
from $4.99
This product is not rated
Nissan Fender Liner Retainer
Fender Liner Retainers
Bumper Cover Molding
from $34.99
This product is not rated
Bumper Cover Molding
Bumper Cover Moldings
Splash Shield Retainer Clips
from $2.99
This product is not rated
Splash Shield Retainer Clips
Fender Splash Shields

What are the top-rated Nissan Pathfinder Body Parts?

Top-rated Body Parts for your Nissan Pathfinder based on customer reviews/ratings are:
Exterior Door Handle
from $23.99
(3)
Exterior Door Handle
“So far…just like OEM.”
Mirror Assembly: Passenger Side, Manual Adjustment, Foldable, 1 Pk
from $21.99
(1)
Mirror Assembly: Passenger Side, Manual Adjustment, Foldable, 1 Pk
“Easy to install in two minutes!”