Nissan NV1500 Belts and Hoses

Essential Nissan NV1500 Belts and Hoses

Bando – Multi Rib (Serpentine) Belt (Part No.W1000423529BAN)

Multi Rib (Serpentine) Belt

from

$36.90
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dayco – Dayco, Acc. Belt Idler Pulley, Pulley Only (Part No.G6020314392DAY)

Dayco, Acc. Belt Idler Pulley, Pulley Only

from

$65.48
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Litens – Idler Pulley: Direct Fit, Steel, 72mm Diameter (Part No.900371A)

Idler Pulley: Direct Fit, Steel, 72mm Diameter

from

$65.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is specifically designed for Nissan truck and SUV applications. A new 12mm I.D. reduction bearing included. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 31mm Width, Smooth (Part No.89007)

Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 31mm Width, Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999172A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$90.99
This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular tensioner used in both Nissan and Suzuki vehicles. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is equipped with a Steel pulley, an integrated lift feature to assist in belt removal and installation and a belt stretch indicator to monitor proper belt length. As with the O.E. part, this tensioner is manufactured in Canada for exact performance and fit. Note: Nissan issued a Technical Service Bulletin (TSB) on this drive addressing morning start-up chirping or squealing noise. They recommended changing the belt and tensioner to resolve the issue. The Litens tensioner is the upgraded version. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89384)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$58.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner is another Dayco product proudly made in the USA
See More

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)

from

$1.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time
  • Similar to SAE 20R3 Class D-3
  • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications.
See More

Gates – V-Ribbed Belts Serpentine Belt: 87.28" Long, 7 Rib Count, Exact Fit (Part No.7PK2217)

V-Ribbed Belts Serpentine Belt: 87.28" Long, 7 Rib Count, Exact Fit

from

$30.99
V-Ribbed Belts Serpentine Belt: 87.28" Long, 7 Rib Count, Exact Fit

Dayco – Poly Rib Belt Serpentine Belt; 87.4 Long, 7 Rib Count (Part No.5070874)

Poly Rib Belt Serpentine Belt; 87.4 Long, 7 Rib Count

from

$30.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 87.4 Long, 7 Rib Count (Part No.874K7)

Poly Rib Belt Serpentine Belt; 87.4 Long, 7 Rib Count

from

$19.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Suncore – Shock Kit (Part No.2-12S255080-001)

Shock Kit

from

$66.99
Shock Kit

Helping You Find the Right Belts and Hoses for Your Nissan NV1500

You love your NV1500. So we’ve made it easier than ever to help you find Nissan NV1500 Belts and Hoses in our online catalog. Our inventory holds 13 aftermarket and OEM Belts and Hoses for your Nissan NV1500, ranging from $1.79 to $90.99.

We offer parts from 7 brands trusted to make quality Belts and Hoses for your Nissan NV1500. Before you buy, take some time to read through customer reviews. We currently have 3,688 reviews of Nissan NV1500 Belts and Hoses from previous customers. Some of the top rated parts include Idler Pulley: Direct Fit, Steel, 72mm Diameter with 1.0 stars and Accessory Drive Belt Tensioner – Original Equipment Quality with 1.0 stars.

Find your NV1500 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan NV1500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Nissan NV1500

Our inventory holds Belts and Hoses for your Nissan NV1500 from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Gates, and Driveworks, all of which can keep that Nissan happy.

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your Nissan NV1500 across several catalog categories, including Pulleys and Serpentine and V Belts. Some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 87.4 Long, 7 Rib Count
from $30.99
(31)
Poly Rib Belt Serpentine Belt; 87.4 Long, 7 Rib Count
Serpentine Belts

FAQs for Nissan NV1500 Belts and Hoses

What are the most purchased Belts and Hoses for the Nissan NV1500?

Out of 13 Belts and Hoses for the Nissan NV1500, the most popular in our inventory are:
Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)
from $1.79
This product is not rated
Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)
By-Pass Hoses
1/2" x 12' Engine Oil Cooler Hose
from $48.49
This product is not rated
1/2" x 12′ Engine Oil Cooler Hose
Engine Oil Cooler Hoses
V-Ribbed Belts Serpentine Belt: 87.28" Long, 7 Rib Count, Exact Fit
from $30.99
This product is not rated
V-Ribbed Belts Serpentine Belt: 87.28" Long, 7 Rib Count, Exact Fit
Serpentine Belts

What are the top-rated Nissan NV1500 Belts and Hoses?

Top-rated Belts and Hoses for your Nissan NV1500 based on customer reviews/ratings are:
Idler Pulley: Direct Fit, Steel, 72mm Diameter
from $65.99
(1)
Idler Pulley: Direct Fit, Steel, 72mm Diameter
“Did not need part. Bought just in case. But part was rusty and looked as it was once pit in service. Loose in beat up box. Not even wrapped up. Disapp”
Accessory Drive Belt Tensioner - Original Equipment Quality
from $90.99
(1)
Accessory Drive Belt Tensioner – Original Equipment Quality
“Mounting bearing hole to large. Would result in sloppy installation and premature failure.”