Nissan Maxima Heater Hose
Your Nissan Maxima will be happy to know that the search for the right Heater Hose products you’ve been looking for is over! Advance Auto Parts has 28 different Heater Hose for your vehicle, ready for shipping or in-store pick up. The best part is, our Nissan Maxima Heater Hose products start from as little as $6.49.
When it comes to your Nissan Maxima, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Heater Hose product and part brands so you can shop with complete confidence. Some of our top Heater Hose product brands are Dayco and Gates. We’re sure you will get the right product to keep that Maxima running for a long time.
We even have reviews of our OEM and aftermarket Heater Hose products to help you buy with confidence. Hear from other customers via the 209 reviews on parts for your Nissan Maxima.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Heater Hose products for your Maxima, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Heater Hose for a Nissan Maxima
Use the fitment form at the top of the page to select your exact year and engine type for your Nissan Maxima.
-
Dayco - Molded Heater Hose (Part No. 87617)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would buy again.
I would buy again.
Submitted 2020-04-06
By Edward
From Undisclosed
Perfect fit!
Bottom Line NULL
-
I would recommend this hose for anyone with a Ford Ranger
I would recommend this hose for anyone with a Ford Ranger
Submitted 2017-05-20
By David
From undisclosed
If you have a 92 Ford Ranger as I do this is the only size hose that will fit it. Advance had it in stock where others did not. Also a 20% Mothers Day Discount, great.
Bottom Line NULL
-
Perfect fit!
Perfect fit!
Submitted 2014-07-28
By Just me
From VA
Ordered online picked up 30 mins later!
Bottom Line not recommended
from $16.99
View Product -
Dayco - 90 Degree Coolant Hose (Part No. 80412)
DescriptionDayco 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Product Features:- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Read 1 review(s)Review snapshot ® by PowerReviews
-
All these hose
All these hose
Submitted 2018-04-05
By Joshua
From undisclosed
A little longer than needed, but fits correctly after a little trimming... good value, too.
Bottom Line NULL
from $16.99
View Product -
Dayco - Molded Heater Hose (Part No. 87675)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 1 review(s)Review snapshot ® by PowerReviews
-
YES
YES
Submitted 2017-11-28
By Clifton
From undisclosed
GREAT PART , HAD TO CUT TO MAKE IT FIT MY VEHICLE. BUT I EXPECTED THAT.
Bottom Line NULL
from $11.99
View Product -
Dayco - Molded Heater Hose (Part No. 87000)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 1 review(s)Review snapshot ® by PowerReviews
-
I would buy this again
I would buy this again
Submitted 2019-08-25
By robin
From Undisclosed
Fit was excellent
Bottom Line NULL
from $16.99
View Product -
Dayco - Molded Heater Hose (Part No. 86817)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 3 review(s)Review snapshot ® by PowerReviews
-
Works
Works
Submitted 2020-09-05
By David
From Undisclosed
Works. Competitive price.
Bottom Line NULL
-
It's a gasket
It's a gasket
Submitted 2017-11-06
By Patrick
From undisclosed
Arrived on time. Worked.
Bottom Line NULL
-
Perfect fit for idle air control valve
Perfect fit for idle air control valve
Submitted 2014-02-25
By bob
From earth
Worked and fit just fine! It's a gasket, not more to say!
Bottom Line recommended
from $25.99
View Product -
Dayco - 90 Degree Coolant Hose (Part No. 80402)
DescriptionDayco 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Product Features:- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Read 3 review(s)Review snapshot ® by PowerReviews
-
Not perfect, but usable.
Not perfect, but usable.
Submitted 2021-12-31
By Deltazone
From Atl
Received wrong part from Rock Auto( first time in 15 years), needed part quickly. Not exact duplicate, but workable.
Bottom Line not recommended
-
no
no
Submitted 2021-08-12
By Dan
From Undisclosed
did not fit
Bottom Line NULL
-
Hose
Hose
Submitted 2020-12-05
By Frank
From Undisclosed
Fit great!
Bottom Line NULL
from $13.99
View Product -
Dayco - Molded Heater Hose (Part No. 88387)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 2 review(s)Review snapshot ® by PowerReviews
-
Highly recomend replacing this hose along with the water pum
Highly recomend replacing this hose along with the water pum
Submitted 2021-02-17
By michael
From Undisclosed
Such a crucial part, high quality and it was in stock!!
Bottom Line NULL
-
High Quality but you have to cut to fit.
High Quality but you have to cut to fit.
Submitted 2018-08-27
By Adam
From Undisclosed
You will have to trim it on both ends for your application. Good product though.
Bottom Line NULL
from $9.99
View Product -
Dayco - Molded Heater Hose (Part No. 87633)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 3 review(s)Review snapshot ® by PowerReviews
-
Works if you need one
Works if you need one
Submitted 2021-08-17
By Christian
From Undisclosed
Fit perfectly in my 2000 civic dx
Bottom Line NULL
-
Sure
Sure
Submitted 2019-01-08
By Michael
From Undisclosed
Fine
Bottom Line NULL
-
Molded hoses fit but definitely not Factory routing
Molded hoses fit but definitely not Factory routing
Submitted 2017-10-24
By Joseph
From undisclosed
Of the four molded heater hoses purchased only one fit very close to factory other three worked but definitely did not route the same as the factory hoses
Bottom Line NULL
from $10.99
View Product -
Dayco - Molded Heater Hose (Part No. 86800)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 3 review(s)Review snapshot ® by PowerReviews
-
Next time get OEM
Next time get OEM
Submitted 2021-03-06
By Michael
From Undisclosed
Worked but very thick walled so took some doing to route. The OEM was thin walled and allowed more clearance workability.
Bottom Line NULL
-
I would not purchase. I returned it
I would not purchase. I returned it
Submitted 2020-03-04
By Benson
From Undisclosed
Do not order. 3 inch piece of hose
Bottom Line NULL
-
Good replacement but compare outside diameter to OE
Good replacement but compare outside diameter to OE
Submitted 2017-12-02
By Christopher
From undisclosed
Make sure you purchase new hose clamps because outside diameter is larger than original hose and OE spring clamps will not fit. Other than that the fit was very good
Bottom Line NULL
from $18.99
View Product -
Dayco - 90 Degree Coolant Hose (Part No. 80416)
DescriptionDayco 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
Product Features:- Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Read 1 review(s)Review snapshot ® by PowerReviews
-
Seems cheap
Seems cheap
Submitted 2017-09-15
By Jack
From undisclosed
Kinks easily and seems flimsy/thin
Bottom Line NULL
from $11.99
View Product -
Dayco - Molded Heater Hose (Part No. 88402)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Made with a protective sleeve that protects contact areas against abrasion and heat
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Read 1 review(s)Review snapshot ® by PowerReviews
-
I returned this item along with 2 other hoses.
I returned this item along with 2 other hoses.
Submitted 2021-03-21
By Ron
From Oklahoma City
When these "dayco" hoses were delivered to me, immediately I noticed they looked strange. The quality of the molded sections was poor and unprofessional at best. Then I noticed that the ends of each of the 3 hoses I purchased appeared to cut with a pocket knife by a kid. There were white strands of material left extending out and every end of each hose was cut jagged and uneven. Before I decided to return the items, I wanted to compare them to the 20 year old original hoses still on my vehicle. So I pulled off the old ones which looked much better in the quality of the molded sections and each end was cut perfectly straight and perfectly even. There were no strands hanging off either. Ultimately I decided to return the hoses to avoid risk of premature failure but more importantly because I can get a much more professional high quality hose from the dealership for pretty much the same price listed for these. I know I could have used these hoses without any issues for at least a few years, beyond that I'm not sure if the poor quality moldings would have continued to hold up against a failure. So I elect to go to the dealership because I know their hoses will last at least 20 years and I'll never worry about them again. Had these items not looked like they were hand made by an employee who can't cut a straight line and used the generic hose sold by the foot with a "dayco" sticker attached to it, then I would have put them on my car with no worries.
Bottom Line not recommended
from $38.99
View Product -
Dayco - Molded Heater Hose (Part No. 86815)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $6.49
View Product -
Dayco - Molded Heater Hose (Part No. 87658)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $14.99
View Product -
Dayco - Molded Heater Hose (Part No. 88353)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $13.99
View Product -
Dayco - Molded Heater Hose (Part No. 87631)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $36.99
View Product -
Dayco - Heater Hose (Part No. R30301220370DAY)
from $7.64
View Product -
Dayco - Molded Heater Hose (Part No. 88401)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Made with a protective sleeve that protects contact areas against abrasion and heat
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $38.99
View Product -
Dayco - Molded Heater Hose (Part No. 88422)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Made with a protective sleeve that protects contact areas against abrasion and heat
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $20.79
View Product -
Dayco - Molded Heater Hose (Part No. 88477)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $14.49
View Product -
Dayco - Molded Heater Hose (Part No. 88478)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $9.49
View Product -
Dayco - Molded Heater Hose (Part No. 86804)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $9.99
View Product -
Gates - Heater Hose (Part No. R3030124137GAT)
from $51.11
View Product -
Gates - Heater Hose (Part No. R3030139975GAT)
from $35.44
View Product -
Dayco - Molded Heater Hose (Part No. 88400)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $17.99
View Product -
Dayco - Heater Hose (Part No. R3030984716DAY)
from $17.24
View Product
Year Range for Nissan Maxima
People also search Advance Auto for these popular years of Nissan Maxima parts:
FAQs for Nissan Maxima Heater Hose Products
What are the most popular Heater Hose for the Nissan Maxima?
With 2 brands you can trust, our most popular Heater Hose products for the Nissan Maxima parts are:What are the Nissan Maxima Heater Hose products with the best customer ratings?
