Motor Coach Industries Serpentine and V Belts
Serpentine and V Belts for Your Motor Coach Industries
Replacing your Motor Coach Industries Serpentine and V Belts shouldn’t cost you an arm and a leg. That’s why we offer plenty of options for you to choose from, making it easy to find top rated Serpentine and V Belts brands at a fraction of the cost.
Essential Motor Coach Industries Serpentine and V Belts
Dayco – Poly Rib Belt Serpentine Belt; 29.53 Long, 6 Rib Count (Part No.5060295)
from
$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K120738HD)
from
$144.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides maximum performance at extreme, extended operating temperatures
- Construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- It is recommended to replace the tensioner (if equipped)
Gates – Hi-Power II PowerBand Classical Section Wrapped Joined V-Belt (Part No.2/B93)
from
$124.99
The Hi-Power(R) II PowerBand(R) construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive.
Product Features:
See More
Product Features:
- Smoother operation with less slippage and wear for excellent belt life and reduced pulley wear.
- High-quality rubber compound that is resistant to heat, ozone and solar rays.
- The patented Flex-Weave cover is made of a proprietary fabric that protects the belt core from oil, contaminants, and heat to extend its life.
- Flexible bonding ropes feature strong adhesion to the strap body, resulting in even load distribution and absorption of bending stress, without deterioration of the ropes
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- Temperature Range: -22 Deg. F to +140 Deg. F (+30 Deg. C to +60 Deg. C)
- NOTE: Available in sections A, B, C, D and E
Gates – Hi-Power II PowerBand Classical Section Wrapped Joined V-Belt (Part No.2/C90)
from
$123.99
The Hi-Power(R) II PowerBand(R) construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive.
Product Features:
See More
Product Features:
- Smoother operation with less slippage and wear for excellent belt life and reduced pulley wear.
- High-quality rubber compound protects the belt from heat, ozone and sunlight
- The Flex-Weave coating is a patented fabric construction that protects the belt core from oil, contaminants and heat, extending the life of the belt.
- The flexible ropes adhere strongly to the belt body, allowing for even load distribution and absorption of bending stresses, fatigue and shock without deterioration of the ropes.
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- Temperature range -22 degrees F to +140 degrees F (-30 degrees C to +60 degrees C)
- NOTE: Available in A, B, C, D and E cross-sections
Gates – Hi-Power II Classical Section Wrapped V-Belt (Part No.C152)
from
$120.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.
Product Features:
See More
Product Features:
- Smoother operation with less slippage and wear for excellent belt life and reduced pulley wear.
- High-quality rubber compound protects the belt from heat, ozone and sunlight
- Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
- The flexible ropes adhere strongly to the belt body, allowing for even load distribution and absorption of bending stresses, fatigue and shock without deterioration of the ropes.
- Meets RMA oil and heat resistant standards and static conductivity requirements
- Temperature range -22 degrees F to +140 degrees F (-30 degrees C to +60 degrees C)
- NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
Dayco – Poly Rib Belt HD Serpentine Belt; 88 Long, 10 Rib Count, Heavy Duty (Part No.5100880)
from
$119.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K100879HD)
from
$119.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Crack and wear resistant construction, even in extreme temperatures
- The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
- Problem solver designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Designed to save your fleet’s money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Gates – Micro-V Serpentine Drive Belt (Part No.K120738)
from
$111.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all original equipment manufacturer specifications.
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K100610HD)
from
$109.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Designed to save your fleet’s money and reduce downtime
- It is recommended to replace the tensioner (if equipped)
Gates – Tri-Power Classical Section Molded Notch V-Belt (Part No.CX101)
from
$106.99
Constructed with Gates proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance. This provides superior performance on the toughest heavy-duty A, B and C Section industrial drives. Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
Product Features:
See More
Product Features:
- The belt edge is machined for even contact with the pulley groove, reducing slippage and wear for smoother operation.
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Cross-oriented, fiber-loaded rubber compound for flexibility and stability
- The notches molded into the belt during manufacturing make this belt well suited for transmissions with smaller diameter pulleys.
- Meets RMA oil and heat resistant standards and static conductivity requirements
- Temperature Range: -58 Deg. F to +248 Deg. F (+50 Deg. C to +120 Deg. C)
- Note: Available in AX, BX, and CX sections as well as Tri-Power PowerBand enclosed V-belts.
Gates – Tri-Power Classical Section Molded Notch V-Belt (Part No.CX96)
from
$101.99
Constructed with Gates proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance. This provides superior performance on the toughest heavy-duty A, B and C Section industrial drives. Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
Product Features:
See More
Product Features:
- The belt edge is machined for even contact with the pulley groove, which reduces slippage and wear for smoother operation.
- Flexible binding ropes feature a strong attachment to the strap body, resulting in even load distribution and absorption of bending stress, without deterioration of the ropes
- Rubber compound with crossed fibers for greater flexibility and stability.
- The notches molded into the belt during manufacturing make this belt very suitable for drives with smaller diameter pulleys
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- Temperature Range: -58 Deg. F to +248 Deg. F (-50 Deg. C to +120 Deg. C)
- Note: Available in AX, BX and CX cross-sections, as well as Tri-Power PowerBand bonded V-belts
Gates – Tri-Power Classical Section Molded Notch V-Belt (Part No.CX90)
from
$95.99
Constructed with Gates proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance. This provides superior performance on the toughest heavy-duty A, B and C Section industrial drives. Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
Product Features:
See More
Product Features:
- Belt edge is machined for even pulley groove contact, resulting in less slippage and wear for smoother running
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Rubber compound with crossed fibers for greater flexibility and stability.
- The notches molded into the belt during manufacturing make this belt well suited for transmissions with smaller diameter pulleys.
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- Temperature range -58 degrees F to +248 degrees F (-50 degrees C to +120 degrees C)
- Note: Available in AX, BX, and CX cross-sections as well as Tri-Power PowerBand joined V-belts
Dayco – Poly Rib Belt HD Serpentine Belt; 73.82 Long, 12 Rib Count, Heavy Duty (Part No.5120738)
from
$92.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Gates – Micro-V Serpentine Drive Belt (Part No.K100610)
from
$89.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all OEM specifications
- Replacement of the tensioner is recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Dayco – Wrapped Industrial V-Belt, Dayco GL (Part No.CP152)
from
$77.99
The Dayco industrial V-belt is more energy-efficient because it is more flexible. This Dayco belt offers the highest horsepower rating for longer service while its raw edge design resists slippage even at low drive tensions. Designed for smaller more compact drives, Dayco industrial V-belts offer excellent oil and heat resistance, flexibility and static dissipation. Its special design allows for more efficient load carrying and higher horsepower capabilities.
Product Features:
See More
Product Features:
- Features high grade engineered polymer compounds to help resist heat, oil, and grease
- Reliable performance over an extremely wide range of horsepower and RPM applications
- Manufactured to OEM specifications
Gates – Hi-Power II Classical Section Wrapped V-Belt (Part No.C95)
from
$76.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.
Product Features:
See More
Product Features:
- Smoother operation with less slippage and wear for excellent belt life and reduced pulley wear.
- High-quality rubber compound protects the belt from heat, ozone and sunlight
- The patented Flex-Weave cover is made of a proprietary fabric that protects the belt core from oil, contaminants, and heat to extend its life.
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
- NOTE: Available in A, B, C, D, and E cross-sections, as well as High Power PowerBand V Belts II
Gates – Hi-Power II Classical Section Wrapped V-Belt (Part No.C93)
from
$74.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.
Product Features:
See More
Product Features:
- Smoother operation with less slippage and wear for excellent belt life and reduced pulley wear.
- High-quality rubber compound that is resistant to heat, ozone and solar rays.
- The patented Flex-Weave cover is made of a proprietary fabric that protects the belt core from oil, contaminants, and heat to extend its life.
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- Temperature range -22 degrees F to +140 degrees F (-30 degrees C to +60 degrees C)
- NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
Dayco – Premium Industrial V-Belts: 100.1 In. Outside Circumference, 0.922 In. Width (Part No.CX96)
from
$50.99
Designed for applications requiring increased horsepower capacity or higher drive speeds, the Dayco lawn & garden belt’s unique construction combines the superior flexing of precision molded cogs with the tenacious gripping power of raw edge sidewalls to deliver significantly longer belt life. This belt, constructed with a double fabric cover, handles the most demanding industrial applications up to 8,000 RPM and offers extreme flexibility enabling it to run on smaller pulleys.
Product Features:
See More
Product Features:
- Features high grade engineered polymer compounds to help resist heat, oil and grease
- Reliable performance over an extremely wide range of horsepower and RPM applications
- Manufactured to OEM specifications
Dayco – Industrial V-Belts: 97 In. Outside Circumference, 0.875 In. Width (Part No.CP93)
from
$46.99
The Dayco industrial V-belt is more energy-efficient because it is more flexible. This Dayco belt offers the highest horsepower rating for longer service while its raw edge design resists slippage even at low drive tensions. Designed for smaller more compact drives, Dayco industrial V-belts offer excellent oil and heat resistance, flexibility and static dissipation. Its special design allows for more efficient load carrying and higher horsepower capabilities.
Product Features:
See More
Product Features:
- Features high grade engineered polymer compounds to help resist heat, oil, and grease
- Reliable performance over an extremely wide range of horsepower and RPM applications
- Manufactured to OEM specifications
Dayco – Poly Rib Belt, Premium, Dayco (Part No.5100613)
from
$38.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Popular Motor Coach Industries Serpentine and V Belts Categories
Compare Deals on Motor Coach Industries Serpentine and V Belts
Shop Motor Coach Industries Serpentine and V Belts today. Advance Auto Parts carries top rated Serpentine and V Belts brands for your Motor Coach Industries. Search through our selection of popular aftermarket or OEM parts, we are confident you can find the Serpentine and V Belts deal that will fit your vehicle hassle-free.
Compare before you buy, we offer customer reviews and star ratings on all of our Motor Coach Industries Serpentine and V Belts. Once you have reviewed your options and selected the deal that fits your budget, all that is left for you to decide is how to have your new Motor Coach Industries parts delivered. You can either have the Serpentine and V Belts shipped directly to you or you can pick them up at your local Advance Auto Parts store.
Start shopping below and watch your savings grow!
