Mitsubishi Tredia Brake Parts
Top Mitsubishi Tredia Brake Parts Categories
We carry over 9 Brake Parts in inventory for the Mitsubishi Tredia. If you’re looking for aftermarket Brake Parts for your Mitsubishi Tredia, check out all these categories:
Essential Mitsubishi Tredia Brake Parts
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2135)
from
$115.99
Wearever power brake boosters are built to meet or exceed original equipment (OE) performance standards for fit, form and function. Every brake booster is completely disassembled, cleaned, inspected, and remanufactured with OE-quality components. We also use reverse engineering to gain insight into why the original unit failed, often resulting in an improved product. All Wearever power brake boosters are 100 percent tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- New mounting nuts and washers ensure proper, hassle-free installation.
- All units are 100 percent tested to ensure reliable performance.
- Guaranteed fit and function.
- Meets or exceeds O.E. performance.
Carquest Wearever – Disc Brake Hardware Kit (Part No.15568A)
from
$20.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
- Corrosion Resistant Coated Stainless Steel
Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15201)
from
$7.29
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Front (Part No.17-328)
from
$47.99
Product Features:
See More
- PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
- Positive mold technology for consistent wear and performance
- The pad surfaces are thermal scorched for fast break-in
- Includes premium stainless-steel hardware for hassle free installation
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
Carquest Standard – Brake Pads: Reliable and Dependable Stopping – Front (Part No.MKD284)
from
$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
PowerStop – Z16 Low-Dust Ceramic Brake Pads – Front (Part No.16-328)
from
$33.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA38126)
from
$15.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38275)
from
$26.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA100979)
from
$23.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Mitsubishi Tredia Brake Parts Categories
Helping You Find the Right Brake Parts for Your Mitsubishi Tredia
You love your Tredia. So we’ve made it easier than ever to help you find Mitsubishi Tredia Brake Parts in our online catalog. Our inventory holds 9 aftermarket and OEM Brake Parts for your Mitsubishi Tredia, ranging from $7.29 to $115.99.
We offer parts from 3 brands trusted to make quality Brake Parts for your Mitsubishi Tredia. Before you buy, take some time to read through customer reviews. We currently have 15 reviews of Mitsubishi Tredia Brake Parts from previous customers.
Find your Tredia Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mitsubishi Tredia part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Brake Parts Brands for Your Mitsubishi Tredia
Our inventory holds Brake Parts for your Mitsubishi Tredia from 3 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Wearever, and PowerStop, all of which can keep that Mitsubishi happy.
We have Carquest Wearever parts available for your Mitsubishi Tredia in categories like Brake Kits. Some of the top-rated Carquest Wearever parts in these categories are:
FAQs for Mitsubishi Tredia Brake Parts
What are the most purchased Brake Parts for the Mitsubishi Tredia?
Out of 9 Brake Parts for the Mitsubishi Tredia, the most popular in our inventory are:
