Mitsubishi Outlander Ignition and Tune-Up Products

Essential Mitsubishi Outlander Ignition and Tune-Up Products

NGK – Spark Plug Wire Set (Part No.8910)

Spark Plug Wire Set

from

$66.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

NGK – NGK Ignition Wire Set (Part No.F1020108641NGK)

NGK Ignition Wire Set

from

$44.72
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Superior Firing and Fuel Savings
  • Outstanding Durability and Performance
  • Excellent Noise Suppression
  • Numbered for easy cylinder identification.
  • High quality EPDM and Silicone coverings.
See More

NGK – Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, LKR7AHX-S (Part No.96358)

Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, LKR7AHX-S

from

$14.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE t

Product Features:
  • HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
See More

ACDelco – Double Platinum Spark Plug (Part No.41-800)

Double Platinum Spark Plug

from

$9.79
ACDelco Professional Double Platinum Spark Plugs are premium aftermarket plugs, and are a high quality replacement for many vehicles on the road today. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

NOK – Spark Plug Tube Seal (Part No.A8027104036NOK)

Spark Plug Tube Seal

from

$16.46
The NOK Spark Plug Tube Seal is manufactured using the highest quality materials and is designed to withstand high temperatures.

Product Features:
  • Stays cool at high temperatures
  • Designed to seal minor surface irregularities
  • No re-torque required
See More

Felpro – Spark Plug Tube Seal Set (Part No.ES 72120)

Spark Plug Tube Seal Set

from

$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Knock Sensor (Part No.SBC4006)

Knock Sensor

from

$289.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA4302)

Ignition Knock (Detonation) Sensor

from

$49.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Knock Sensor (Part No.SBC4007)

Knock Sensor

from

$168.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NGK – Coil on Plug Boot (Part No.58917)

Coil on Plug Boot

from

$11.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-4289)

Spark Plug Wire Set

from

$35.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-013CMP)

Coil On Plug Insulator Boot Multi Pack, Spring included

from

$23.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

DENSO – Coil On Plug Boots-4 (Part No.671-4285)

Coil On Plug Boots-4

from

$41.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Carquest Premium – Ignition Switch (Part No.CSC1322)

Ignition Switch

from

$91.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Switch (Part No.CS1264)

Ignition Switch

from

$99.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1107)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$89.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1184)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$163.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Diamond – Direct Ignition Coil – (Coil on Plug) (Part No.F3005169037DEM)

Direct Ignition Coil - (Coil on Plug)

from

$124.23
The Diamond Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Delphi – Ignition Coil (Part No.GN10191)

Ignition Coil

from

$139.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1071)

Ignition Coil: Meets OE Specifications, 1 Count

from

$62.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

DENSO – Coil On Plug Boots-2 (Part No.671-4279)

Coil On Plug Boots-2

from

$57.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Mitsubishi Outlander

You love your Outlander. So we’ve made it easier than ever to help you find Mitsubishi Outlander Ignition and Tune-Up Products in our online catalog. Our inventory holds 133 aftermarket and OEM Ignition and Tune-Up Products for your Mitsubishi Outlander, ranging from $2.49 to $311.99.

We offer parts from 19 brands trusted to make quality Ignition and Tune-Up Products for your Mitsubishi Outlander. Before you buy, take some time to read through customer reviews. We currently have 29,605 reviews of Mitsubishi Outlander Ignition and Tune-Up Products from previous customers. Some of the top rated parts include DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.3 stars and G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP with 4.8 stars.

Find your Outlander Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mitsubishi Outlander part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Mitsubishi Outlander

Our inventory holds Ignition and Tune-Up Products for your Mitsubishi Outlander from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Autolite, NGK, and Champion, all of which can keep that Mitsubishi happy.
We have Carquest parts available for your Mitsubishi Outlander in categories like Ignition Switches. Some of the top-rated Carquest parts in these categories are:
Ignition Switch
from $99.99
(1)
Ignition Switch
Ignition Starter Switches

Top-Rated Autolite Iridium Ignition and Tune-Up Products

Leading Autolite Iridium Ignition and Tune-Up Products

We carry Autolite Iridium brand parts for your Mitsubishi Outlander across several catalog categories, including Spark Plugs. Some of our most reviewed Autolite Iridium parts include:

FAQs for Mitsubishi Outlander Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Mitsubishi Outlander?

Out of 133 Ignition and Tune-Up Products for the Mitsubishi Outlander, the most popular in our inventory are:

What are the top-rated Mitsubishi Outlander Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Mitsubishi Outlander based on customer reviews/ratings are:
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
from $6.99
(188)
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
“great product truck runs better than ever”
G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP
from $6.29
(141)
G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP
“Love how fast parts come”
Champion Copper Plus- Single Card - RC12YC
from $4.99
(140)
Champion Copper Plus- Single Card – RC12YC
“Worked as described”