Name: Starter Solenoid
Brand: Carquest Premium
SKU: SBC1839
Price: 149.99 USD

from

$149.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$93.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$98.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$2.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$171.99

The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$72.99

The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$85.99

The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$2.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$158.99

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
100% remanufactured drive clutch assembly ensures lasting performance
Armatures and commutators are 100% load tested
New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$174.99

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

from

$139.99

Product Features:

Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strength outer case resists shorting.
Armatures have precision machined and upgraded steel shaft for improved durability and performance.
Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.

from

$25.99

The starter motor is responsible for rotating the engine during the starting process. The electric starter motor has several serviceable parts making repair economical when single part replacement will suffice.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Application matched component to ensure the system can be returned to like new condition.

from

$4.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$12.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$244.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
100% new OE-quality brushes and bearings are used to ensure long service life
Rotors and stators are load tested and double insulated for maximum charging performance
Slip rings are precision polished for maximum brush contact and service life
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$207.99

This 90-amp alternator from WAI is a top-tier choice for reliable performance and durability. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation, making it an ideal replacement for your vehicle. Equipped with advanced voltage regulator protection, it safeguards against transient voltage spikes, preventing potential battery damage while maintaining efficient communication with the ECU. The low saturation voltage design minimizes heat dissipation, enhancing overall efficiency. Its high-power rectifier assembly features robust open junction press-fit diodes, ensuring the unit stays cool even under demanding conditions. Each alternator comes with a printed copy of test results, giving you confidence in its performance from the very first use. Built for long-lasting dependability, this alternator delivers exceptional value and peace of mind for your vehicle’s electrical system.

Product Features:

Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Built with durability in mind, this alternator is designed to deliver long-lasting performance, ensuring reliable operation for your vehicle’s electrical system over time.

from

$193.99

This 75-amp alternator from WAI is a top-tier choice for those seeking reliability and performance in their vehicle’s electrical system. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. The advanced voltage regulator protection safeguards against transient voltage spikes, preventing potential battery damage while maintaining efficient communication with the ECU. Its low saturation voltage minimizes heat dissipation, enhancing durability and performance. The high-power rectifier assembly, equipped with open junction press-fit diodes, is designed to keep the unit running cool even under demanding conditions. Each unit comes with a printed copy of test results, providing transparency and confidence in its quality and functionality. Whether you’re upgrading or replacing, this alternator delivers exceptional value and dependable power.

Product Features:

Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
The alternator’s advanced design enhances durability and performance by minimizing heat dissipation, ensuring reliable operation even under demanding conditions.

from

$215.99

This 110-amp alternator from WAI is a top-tier choice for reliable performance and durability. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation, making it an ideal replacement for your vehicle. Featuring advanced voltage regulator protection, it safeguards against transient voltage spikes, preventing potential battery damage while maintaining efficient communication with the ECU. The low saturation voltage design minimizes heat dissipation, enhancing the unit’s longevity. Its high-power rectifier assembly incorporates open junction press-fit diodes, ensuring the alternator runs cooler even under demanding conditions. Each unit is rigorously tested, and a printed copy of the test results is included, giving you confidence in its performance from the moment it powers on. With WAI’s commitment to quality, this alternator delivers exceptional value and peace of mind for your vehicle’s electrical system.

Product Features:

Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Rigorously tested for durability and reliability, ensuring consistent performance under demanding conditions.

from

$225.99

This 110-amp alternator from WAI is engineered to deliver exceptional performance and reliability, making it a top choice for aftermarket replacements. Designed to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. Featuring advanced voltage regulator protection, it safeguards against transient voltage spikes, preventing potential battery damage while maintaining efficient communication with the ECU. The low saturation voltage minimizes heat dissipation, enhancing durability and efficiency. Its high-power rectifier assembly incorporates open junction press-fit diodes, ensuring the unit runs cooler even under demanding conditions. Each unit is rigorously tested, and a printed copy of the test results is included, giving you confidence in its performance from the moment it powers on. Built for long-lasting dependability, this alternator is a smart investment for maintaining your vehicle’s electrical system.

Product Features:

Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Built for long-lasting dependability, this alternator ensures consistent performance and durability, making it a reliable choice for maintaining your vehicle’s electrical system.

from

$214.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$112.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$345.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

Mitsubishi Eclipse Alternators and Starters

Top Mitsubishi Eclipse Alternators and Starters Categories

Essential Mitsubishi Eclipse Alternators and Starters

Carquest Premium – Starter Solenoid (Part No.SBC1839)

Carquest Premium – Starter Solenoid (Part No.SBC2243)

Carquest Premium – Alternator Rectifier Bridge (Part No.XAA1251)

Carquest Premium – Alternator Brush Set (Part No.XAA1177)

Carquest Premium – Ignition Lock Cylinder (Part No.CSC3608)

Carquest Premium – Ignition Lock Cylinder (Part No.CSA3441)

Carquest Premium – Ignition Lock Cylinder (Part No.CSA2074)

Carquest Premium – Starter Bushing (Part No.SBA5163)

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.17217S)

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.17768S)

WAI – Starter: 1.4 KW/12 Volt, CW, 8-Tooth Pinion (Part No.17931N)

Carquest Premium – Starter Drive (Part No.SDC1025)

Carquest Premium – Starter Brush (Part No.XAA1081)

Carquest Premium – Starter Brush (Part No.XAA1181)

Carquest Premium – Alternator: Remanufactured, 110 Amps, Limited Lifetime Warranty (Part No.11029A)

WAI – Mitsubishi Ir/If 90 Amp/12 Volt, Cw, 5-Groove Pulley, Limited Lifetime Warranty (Part No.13840N)

WAI – Mitsubishi Ir/If 75 Amp/12 Volt, Cw, 4-Groove Pulley, Limited Lifetime Warranty (Part No.13332N)

WAI – Mitsubishi Ir/If 110 Amp/12 Volt, Cw, 6-Groove Pulley, Limited Lifetime Warranty (Part No.11029N)

WAI – Mitsubishi Ir/If 110 Amp/12 Volt, Cw, 6-Groove Pulley, Limited Lifetime Warranty (Part No.11118N)

Carquest Premium – Voltage Regulator (Part No.RAC1165)

Carquest Premium – Voltage Regulator (Part No.RAC3178)

Carquest Premium – Voltage Regulator (Part No.RAA3355)

Mitsubishi Eclipse Alternators and Starters Categories

Helping You Find the Right Alternators and Starters for Your Mitsubishi Eclipse

Top Alternators and Starters Brands for Your Mitsubishi Eclipse

Top-Rated Carquest Premium Alternators and Starters

Leading Carquest Premium Alternators and Starters

FAQs for Mitsubishi Eclipse Alternators and Starters

What are the most purchased Alternators and Starters for the Mitsubishi Eclipse?

What are the top-rated Mitsubishi Eclipse Alternators and Starters?

Find Your Mitsubishi Eclipse Alternators and Starters by Year

More Popular Parts for All Makes