Mitsubishi Diamante Ignition and Tune-Up Products

Essential Mitsubishi Diamante Ignition and Tune-Up Products

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles.
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

NOK – Spark Plug Tube Seal (Part No.A8027104036NOK)

Spark Plug Tube Seal

from

$16.46
The NOK Spark Plug Tube Seal is manufactured using the highest quality materials and is designed to withstand high temperatures.

Product Features:
  • Stays cool at high temperatures
  • Designed to seal minor surface irregularities
  • No re-torque required
See More

NGK – Ignition Wire Set (Part No.F1020115902NGK)

Ignition Wire Set

from

$172.47
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Superior Firing and Fuel Savings
  • Outstanding Durability and Performance
  • Excellent Noise Suppression
  • Numbered for easy cylinder identification.
  • High quality EPDM and Silicone coverings.
See More

BERU Systems – Ignition Igniter (Part No.F2024303170BER)

Ignition Igniter

from

$123.90
The ignition Igniter, also known as the switching unit, is used to regulate the current and dwell angle for transistor ignition systems using a hall sensor or inductive sensor. The module provides for reliable spark distribution in modern ignition systems with rotary high voltage distribution – a task that in older, conventional coil ignition systems was performed by the contact sets.

Product Features:
  • Well tried and tested OEM quality
  • Connections and housing corrosion protected
  • High thermal resistance and thus functional reliability
  • Depending on the version, also with cooling plate or thermally conductive paste included
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1533)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$35.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Distributor Rotor (Part No.DAA1358)

Distributor Rotor

from

$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Conventional Nickel Tip Copper Core Spark Plug: Reliable Performance (Part No.R42XLS)

Conventional Nickel Tip Copper Core Spark Plug: Reliable Performance

from

$4.99
ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Black Onyx coating helps reduce corrosion
  • Copper core provides great heat transfer and helps maximize plug durability
  • Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
  • Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
  • Available for use in Marine applications
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • High-Quality Copper Core: Designed with a high-quality copper core to ensure reliable and efficient performance.
  • Nickel Alloy Electrode Tip: Features a nickel alloy center electrode tip for enhanced durability and performance.
  • Outstanding Suppression Characteristics: Engineered with superior suppression characteristics to deliver consistent and reliable performance.
  • Premium Aftermarket Replacement: Manufactured to meet high standards of fit, form, and function, providing a dependable replacement option for many vehicles.
See More

Beck/Arnley – Ignition Switch (Part No.201-1806)

Ignition Switch

from

$46.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Switch only – does not include steering lock
  • Premium materials that include corrosion resistant contacts
  • Made to fit OE wiring harness and ignition cylinder
  • Application specific for this vehicle
See More

Carquest Premium – Distributor Cap (Part No.CAE1609)

Distributor Cap

from

$54.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap (Part No.CAE1726)

Distributor Cap

from

$41.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NGK – Standard Spark Plug (Part No.F100037057NGK)

Standard Spark Plug

from

$4.65
The NGK Standard copper core spark plug provides OEM quality, consistent performance and extended long life.

Product Features:
  • Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
  • Corrugated Ribs Prevent Flashover
  • Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
  • Copper Core Aids in Heat Removal
  • Triple Seals Prevent Leakage
See More

DENSO – Double Platinum Spark Plug (Part No.F100032952ND)

Double Platinum Spark Plug

from

$11.66
The DENSO Double-Platinum plug features platinum on both the center and ground electrodes. The precious metal fights corrosion and erosion, ensuring superior spark performance and maximum spark plug life. DENSO Double Platinum spark plugs incorporate the precious metal on both the center and ground electrodes, not just on the center electrode as with conventional platinum plugs. The result is a significant improvement in spark plug life.

Product Features:
  • Platinum center electrode
  • Platinum ground electrode
  • Premium shell construction with machine-rolled threads
  • Sustained spark performance over 60,000 miles
  • Reduced secondary required voltage, increased ignition efficiency DENSO engineering studies show that Double Platinum plugs can run longer with reduced erosion, minimizing spark gap growth throughout the life of the plug.
See More

Carquest Premium – Distributor T576: 100% New, With Cap and Rotor (Part No.T576)

Distributor T576: 100% New, With Cap and Rotor

from

$347.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Carquest Premium – Distributor T49603: 100% New, With Cap and Rotor (Part No.T49603)

Distributor T49603: 100% New, With Cap and Rotor

from

$317.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

NGK – Spark Plug Wire Set (Part No.4405)

Spark Plug Wire Set

from

$150.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.52372)

Spark Plug Wire Set

from

$63.99
Spark Plug Wire Set

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6215)

Spark Plug Wire Set: Carbon Core, 6 Wire Set

from

$109.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6092)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$76.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Switch (Part No.CSA2263)

Ignition Switch

from

$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSA1505)

Ignition Switch

from

$53.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Knock Sensor (Part No.SBC3835)

Knock Sensor

from

$83.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Delphi – Knock Sensor (Part No.AS10051)

Knock Sensor

from

$141.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Sylvania – 37 Long Life: Mini Bulb, Standard Performance, 2 Pack (Part No.37LLBP2)

37 Long Life: Mini Bulb, Standard Performance, 2 Pack

from

$6.99
SYLVANIA Long Life miniature bulbs provide standard performance for your car or truck’s interior and exterior auxiliary lighting. Ideal for use in your car’s back up/reverse, trunk, dome lights and more, Long Life bulbs are a direct replacement for your vehicle. Designed for durability, lower maintenance, and safety in mind.

Product Features:
  • DEPENDABLE: Made from high quality materials for long-lasting durability
  • EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
  • SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
  • PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
  • SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
  • TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Mitsubishi Diamante

You love your Diamante. So we’ve made it easier than ever to help you find Mitsubishi Diamante Ignition and Tune-Up Products in our online catalog. Our inventory holds 130 aftermarket and OEM Ignition and Tune-Up Products for your Mitsubishi Diamante, ranging from $2.49 to $347.99.

We offer parts from 24 brands trusted to make quality Ignition and Tune-Up Products for your Mitsubishi Diamante. Before you buy, take some time to read through customer reviews. We currently have 27,527 reviews of Mitsubishi Diamante Ignition and Tune-Up Products from previous customers. Some of the top rated parts include DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.3 stars and G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP with 4.8 stars.

Find your Diamante Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mitsubishi Diamante part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Mitsubishi Diamante

Our inventory holds Ignition and Tune-Up Products for your Mitsubishi Diamante from 24 trusted brands. You’ll find OEM and aftermarket parts from brands like NGK, Autolite, and DENSO, all of which can keep that Mitsubishi happy.
We have Bosch parts available for your Mitsubishi Diamante in categories like Distributors. Some of the top-rated Bosch parts in these categories are:
Bosch Distributor Cap
from $74.89
(1)
Bosch Distributor Cap
Distributor Cap Kits

Top-Rated NGK Ignition and Tune-Up Products

Leading NGK Ignition and Tune-Up Products

We carry NGK brand parts for your Mitsubishi Diamante across several catalog categories, including Spark Plugs. Some of our most reviewed NGK parts include:

FAQs for Mitsubishi Diamante Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Mitsubishi Diamante?

Out of 130 Ignition and Tune-Up Products for the Mitsubishi Diamante, the most popular in our inventory are:

What are the top-rated Mitsubishi Diamante Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Mitsubishi Diamante based on customer reviews/ratings are:
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
from $6.99
(188)
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
“great product truck runs better than ever”
G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP
from $6.29
(141)
G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP
“Love how fast parts come”