Mercury Stereos

The CF-WHFD2 is a turbo wire harness for Ford vehicles.

Product Features:

• Feature OEM-quality terminals for the most secure connection between terminals and connector
• High impact ABS OEM
• Quality plastic molded connectors provide perfect Fit
• Color coded set of four RCA’s for feeding low level signal into factory amplified system

This harness is used to wire up to the aftermarket radio harness and plug into the OEM wire harness behind radio for 85-04 Ford models.

Product Features:

• Provides power to aftermarket radio
• Allows speaker connection
• Fits into factory plug
• Used for AM and FM reception when replacing the OEM radio

This installation kit offers quick conversion from shaft to DIN mount and fits in the factory radio location. The radio installation kit allows you to replace the OEM radio with an aftermarket radio for Ford Focus 2005-2006 models.

Product Features:

• Snap-in ISO
• Recessed DIN mount
• ISO trim ring
• Made with high grade ABS plastic

This installation kit offers quick conversion from shaft to DIN mount and fits in the factory radio location. The radio installation kit allows you to replace the OEM radio with an aftermarket radio for Ford truck models.

Product Features:

• Designed for DIN-Mount radios
• Pocket holds one CD jewel case
• Contoured to match factory dash
• Din Radio Provision with pocket

The CF-WHFD4 has OEM-quality terminals for the most secure connection between terminal and connector. The pre-stripped ends allow for easy connection. The quality plastic molded connectors provide a perfect Fit.

Product Features:

• OEM-quality terminals
• Pre-stripped ends allow for easy connections
• High impact ABS OEM quality plastic molded connectors provide a perfect Fit
• For non amplified system

Metra AAPWHFD4 Aftermarket Radio Wire Harness for non-amplified Ford/Lincoln/Mercury 2003-up Models. Install a new car radio faster with this wiring harness that plugs right into the vehicle’s connectors, allowing you to hook up the radio into the vehicle’s electrical system. On one side, the wiring harness is color-coded with wires that you’ll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires. Keep in mind that you may need additional parts to complete your installation, including a dash kit, antenna adapter, and, depending on your vehicle, a special interface adapter to retain audio controls on your steering wheel or other important vehicle functions like navigation, video, and more. Look up your vehicle for more information. The AAPWHFD4 is a convenient and easy-to-use way to connect an aftermarket radio to a factory wiring harness. It eliminates the need to cut and splice wires, and it ensures that the aftermarket radio is properly connected to the vehicle’s electrical system. The AAPWHFD4 is a popular choice for car enthusiasts who are replacing the factory radio in their vehicle. It is a high-quality product that is easy to use and provides reliable performance.

Product Features:

• This harness is used to wire up to the aftermarket radio harness and plug into the OEM wire harness behind radio for 2003+ Ford, Lincoln, and Mercury models.
• Provides power to aftermarket radio
• Allows speaker connection
• Fits into factory plug
• Used for AM and FM reception when replacing the OEM radio

Metra AAP586FT radio installation kit allows you to replace the OEM radio with an aftermarket radio for Ford/Lincoln/Mazda/ Mercury 1995-2011 models. DIN Radio Provision with Pocket. This kit replaces the OEM radio and allows an aftermarket radio to be installed in the factory radio locations. This stereo installation kit has been engineered to help you install a 2 inch tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is designed to match the original look and feel of the vehicle dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio could not offer but requires this dash kit to make it fit.

Product Features:

• Easy to install with simple instructions
• No dash alterations and Includes corner supports
• Designed to Fit factory radio opening perfectly
• Stereo installation kit designed to fit any standard 2 inch tall aftermarket radio and has built in pocket
• Made from the highest quality ABS plastic for an original factory-like fit and finish
• A tech support number is available for installation help 7 days a week

This harness is used to wire up to the aftermarket radio harness and plug into the OEM wire harness behind radio for 85-05 Ford, Lincoln, and Mercury models.

Product Features:

• Provides power to aftermarket radio
• Allows speaker connection
• Fits into factory plug
• Used for AM and FM reception when replacing the OEM radio

This harness is used to wire up to the aftermarket radio harness and plug into the OEM wire harness behind radio for 98-11 Ford, Lincoln, and Mercury models.

Product Features:

• Provides power to aftermarket radio
• Allows speaker connection
• Fits into factory plug
• Used for AM and FM reception when replacing the OEM radio

This harness is used to wire up to the aftermarket radio harness and plug into the OEM wire harness to bypass the factory amplified audio system. Fits Fords with premium sound system amplifiers.

Product Features:

• Provides power to aftermarket radio
• Allows speaker connection
• Fits into factory plug
• Used for AM and FM reception when replacing the OEM radio

This installation kit offers quick conversion from shaft to DIN mount and fits in the factory radio location. The radio installation kit allows you to replace the OEM radio with an aftermarket radio for Mercury 99-02 models.

Product Features:

• Snap-in ISO support
• Under radio pocket
• Recessed DIN mount
• Made with high grade ABS plastic

This harness is used to wire up to the aftermarket radio harness and plug into the OEM wire harness behind radio for 98 and 99 Ford sedans.

Product Features:

• Provides power to aftermarket radio
• Allows speaker connection
• Fits into factory plug
• Connects 99-5715 to 1998-1999 models

FORD

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

New Goodmark Driver And Passenger Side Pair Of Dash Radio Trim Mouldings

Product Features:

• Pair
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This installation kit offers quick conversion from shaft to DIN mount and fits in the factory radio location. The radio installation kit allows you to replace the OEM radio with an aftermarket radio for Nissan 95-04 models.

Product Features:

• DIN and ISO mount applications
• Accommodates two CD jewel cases in pocket
• Contoured to match factory dashboard
• Accommodates two CD jewel cases in pocket

Radio installation kit that allows you top replace OEM radio with a aftermarket radio. Fits Ford Mustang 01-03 models.

Product Features:

• DIN Radio provision
• Comes with rear support bracket
• Contoured to match factory dash
• Made from high quality ABS plastic

A Ford premium sound amplifier integration wire harness. This harness is used to wire up to the aftermarket radio harness and plug into the OEM wire harness and retain the factory amplified audio system.

Product Features:

• Plugs into car harness
• Provides power
• Allows speaker connection
• Fits into factory plug

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost