Mercury Sable Performance and Racing Products
Top Mercury Sable Performance and Racing Products Categories
We carry over 30 Performance and Racing Products in inventory for the Mercury Sable. If you’re looking for aftermarket Performance and Racing Products for your Mercury Sable, check out all these categories:
Essential Mercury Sable Performance and Racing Products
Energy Suspension – Sway Bar Bushing Set (Part No.4.5132G)
from
$31.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
SCT Performance – Livewire TS Plus Performance Programmer and Monitor (Part No.5015P)
from
$599.99
The Livewire TS+ unlocks your vehicle’s hidden performance by re-calibrating your vehicle’s computer for maximum horsepower & torque, increased throttle response, firmer shifts, and even increased fuel mileage. The LiveWire TS+ arrives preloaded with Dyno-proven performance tune files and holds up to 10 custom tuning files for tune flexibility. Access it all on the customizable touch screen.
Product Features:
See More
Product Features:
- Using the 4″ touchscreen, track critical performance data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Product might not be available in all states due to local laws.
MSD Ignition – Harness; MSD 6 to Ford TFI (Part No.8874)
from
$59.99
MSD Ignition control are easy to install, but we also offer several plug-in harnesses. These are especially handy for quick installation on late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD. Two wires go from the MSD to the battery and you’re done with no cutting or splicing!
Product Features:
See More
Product Features:
- Splice free installation
- Plugs directly into factory coil
Energy Suspension – Strut Rod Bushing Set (Part No.4.7119G)
from
$36.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – Distributor Cap And Rotor Kit (Part No.8230)
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MSD Ignition – Ignition Coil (Part No.8227)
from
$78.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for Ford TFI coil
- 85:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$29.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)
from
$528.99
This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats
Product Features:
See More
Product Features:
- Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
- Kits designed for hydraulic roller cams
- .625″ maximum lift springs
Accel – Ford Tfi Mdltr 84-93 W/Grease (Part No.35369)
from
$112.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1984 thru 1993.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Dwell Control Circuit
- Resists False Triggering
Accel – Ford Tfi Mdltr Rmte Mnt W/Grse (Part No.35371)
from
$112.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford TFI Remote Mounted modules. 1991-95
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Dwell Control Circuit
- Resists False Triggering
Mercury Sable Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Mercury Sable
You love your Sable. So we’ve made it easier than ever to help you find Mercury Sable Performance and Racing Products in our online catalog. Our inventory holds 30 aftermarket and OEM Performance and Racing Products for your Mercury Sable, ranging from $9.99 to $599.99.
We offer parts from 8 brands trusted to make quality Performance and Racing Products for your Mercury Sable. Before you buy, take some time to read through customer reviews. We currently have 1,599 reviews of Mercury Sable Performance and Racing Products from previous customers. Some of the top rated parts include VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT with 4.1 stars and Distributor Cap And Rotor Kit with 4.8 stars.
Find your Sable Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercury Sable part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Mercury Sable
Our inventory holds Performance and Racing Products for your Mercury Sable from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Mr. Gasket, and MSD Ignition, all of which can keep that Mercury happy.
We have Energy Suspension parts available for your Mercury Sable in categories like Performance Steering Products. Some of the top-rated Energy Suspension parts in these categories are:
Top-Rated K&N Performance and Racing Products
Leading K&N Performance and Racing Products
We carry K&N brand parts for your Mercury Sable across several catalog categories, including Performance Oil Filters. Some of our most reviewed K&N parts include:
from
$17.99
(120)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
from
$17.99
(99)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
FAQs for Mercury Sable Performance and Racing Products
What are the most purchased Performance and Racing Products for the Mercury Sable?
Out of 30 Performance and Racing Products for the Mercury Sable, the most popular in our inventory are:
from
$29.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
from
$29.49
(12)
High Performance Thermostat – 160 Degree Brass & Copper
Performance Engine Coolant Thermostats
What are the top-rated Mercury Sable Performance and Racing Products?
Top-rated Performance and Racing Products for your Mercury Sable based on customer reviews/ratings are:
from
$528.99
(15)
VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT
“Part worked great. Very convenient.”
from
$108.99
(8)
Distributor Cap And Rotor Kit
“The part works great, fits nice and snug, and does exactly what it’s supposed to do. I put her in and she fired right up, no problems what so ever. I ”
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
