Mercury Park Lane Performance and Racing Products
Top Mercury Park Lane Performance and Racing Products Categories
We carry over 101 Performance and Racing Products in inventory for the Mercury Park Lane. If you’re looking for aftermarket Performance and Racing Products for your Mercury Park Lane, check out all these categories:
Essential Mercury Park Lane Performance and Racing Products
Accel – Contact And Condenser Kit (Part No.8203)
from
$86.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mallory – Distributor Wiring Harness (Part No.29349)
B & M – Shift Improver Kit, 67-91 C6 Transmission (Part No.40262)
from
$77.99
The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Hays – Flexplt: Bb Ford 70-97 (164T) (Part No.12-055)
from
$212.99
Flexplt: Bb Ford 70-97 (164T)
Energy Suspension – Control Arm Bushing Set (Part No.4.3102R)
from
$17.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.9860)
from
$15.99
Chrome plated steel. Includes hold-down bolt or stud. Holds the distributor in place for accurate timing. Serrated bottom prevents the distributor from turning.
Product Features:
See More
Product Features:
- Rolled Edges For Strength
- Ideal For Magnetos
- Ideal For Ignition Distributor
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Competition Cams – Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam (Part No.33-602-5)
from
$341.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7229)
from
$33.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.40 in. x 2.04 in. Port Size
- For 390-428 FE Ford V8
- Gray Color
- Two Piece Configuration
Mallory – Mallory Unilite Dist.: 332-428 Fe Ford (Part No.3755301)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$149.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$51.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Energy Suspension – Control Arm Bushing Set (Part No.4.3102G)
from
$17.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)
from
$119.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.
Product Features:
See More
Product Features:
- Excellent Weight Transfer
- Lets Front End Down Quickly
- Maximum Traction
- Makes Vehicle Safer
- Easier Control At End Of Track
- Better Overall Stability
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Valve Cover (Part No.9412)
from
$99.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford big block (FE series)
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Edelbrock – Classic Series Valve Covers: Ford FE V8 1958-76, Polished Aluminum, Set Of 2 (Part No.4162)
from
$465.99
The Edelbrock #4162 Classic Series Valve Covers are designed for Ford FE V8 1958-1976 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Ford FE V8 1958-76
- Tall
- Polished Aluminum
- Set Of Two
B & M – Holeshot 2400 (Part No.40412)
from
$823.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Mercury Park Lane Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Mercury Park Lane
You love your Park Lane. So we’ve made it easier than ever to help you find Mercury Park Lane Performance and Racing Products in our online catalog. Our inventory holds 101 aftermarket and OEM Performance and Racing Products for your Mercury Park Lane, ranging from $7.99 to $823.99.
We offer parts from 13 brands trusted to make quality Performance and Racing Products for your Mercury Park Lane. Before you buy, take some time to read through customer reviews. We currently have 3,008 reviews of Mercury Park Lane Performance and Racing Products from previous customers. Some of the top rated parts include Automatic Shifter, Z-Gate with 4.4 stars and Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny with 3.8 stars.
Find your Park Lane Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercury Park Lane part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Mercury Park Lane
Our inventory holds Performance and Racing Products for your Mercury Park Lane from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Accel, Mr. Gasket, and Holley, all of which can keep that Mercury happy.
We have Competition Cams parts available for your Mercury Park Lane in categories like Performance Engines. Some of the top-rated Competition Cams parts in these categories are:
from
$426.99
(2)
Xtreme Energy 230/236 Hydraulic Flat Cam and Lifter Kit
Performance Engine Camshaft and Lifter Kits
Top-Rated Accel Performance and Racing Products
Leading Accel Performance and Racing Products
We carry Accel brand parts for your Mercury Park Lane across several catalog categories, including Performance Ignition Products. Some of our most reviewed Accel parts include:
from
$45.99
(54)
Super Stock Replacement Coil for Improved Performance, Starting, and Power
Performance Coils
FAQs for Mercury Park Lane Performance and Racing Products
What are the most purchased Performance and Racing Products for the Mercury Park Lane?
Out of 101 Performance and Racing Products for the Mercury Park Lane, the most popular in our inventory are:
from
$29.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
from
$29.49
(12)
High Performance Thermostat – 160 Degree Brass & Copper
Performance Engine Coolant Thermostats
from
$499.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
Performance Carburetors
What are the top-rated Mercury Park Lane Performance and Racing Products?
Top-rated Performance and Racing Products for your Mercury Park Lane based on customer reviews/ratings are:
from
$682.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
from
$414.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
