from

$76.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$12.99

This replacement headlight socket matches the fit and terminal count of the original equipment socket for specified vehicles. Made of quality materials with corrosion-resistant contacts, this socket is designed for reliable service.

Product Features:

Ideal replacement – this headlight socket matches the fit and terminal count of the original equipment socket
Durable construction – made of quality materials with corrosion-resistant electrical contacts
Cost-effective solution – replaces only the damaged socket by splicing into existing vehicle wiring
Quality tested – this part has undergone testing to ensure a quality fit and long service life

from

$23.99

The Novita EP27 electronic turn signal flasher ensures proper function of your vehicles turn signal lights. This flasher is suitable for installation in various Buick, Chevrolet, Chrysler, Dodge, Ford, Jeep, Lincoln, Mazda, Mercury, Oldsmobile, Plymouth and Pontiac vehicles from 1994 to 2009 and can be used with LED bulbs. The EP27 is proudly assembled in the USA.

Product Features:

FLEXIBILITY: Works with incandescent bulbs, LEDs or a mixture of both
FITMENT: For use in 12 volt applications; vehicle specific, check fitment before installing
CAPACITY: Supports up to 6 lamps; 162 Watt / 13.5 Amp maximum
EASY DIY INSTALL: Plug and play 5-terminal design; no extra wiring or modifications required
SAFETY: Meets DOT regulations and safety standards set for thermal flasher replacements

from

$102.99

Need a new third brake light assembly that looks, fits and performs like the original, without the hassle of going back to the dealership? This replacement was reverse-engineered to match the stock center high mount stop light on specific vehicles.

Product Features:

Ideal replacement – this third brake light assembly was specifically designed to look and function like the original light on specific vehicles
Quality construction – made from quality materials for excellent visibility and illumination
Trustworthy design – backed by team of engineers and specialists in the United States
Thoroughly tested – this part has undergone extensive testing to help ensure a secure fit and long service life

from

$33.99

Upgrade your low and high beam car headlights for a pair of SYLVANIA SilverStar ULTRA halogen bulbs. Our brightest halogen headlight provides the most downroad visibility to see all aspects of the road better. The patented tri-band blue coating produces a whiter light compared to SYLVANIA Basic for improved contrast and clarity. SYLVANIA’s ultra-performance headlight bulbs allow you to see farther for a better night-time driving experience.

Product Features:

BRIGHTEST HEADLIGHT: Superior coil design and proprietary halogen gas mixture produces the brightest downroad halogen headlight from SYLVANIA
WHITER LIGHT: Cobalt blue and tri-band coating provides a whiter light with even more downroad coverage to help distinguish objects in the road
ULTRA NIGHT VISION: The combination of farther downroad, whiter light and more sideroad visibility- allowing you to see farther
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
SAFETY: Compliant with DOT regulations and SAE standards, SYLVANIA headlight bulbs are designed with safety in mind to prevent glare
COMPLIANT: All SYLVANIA bulbs meet DOT and SAE regulations, making them safe for on-road use and eliminate dangerous glare when installed properly
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$22.99

SYLVANIA LED miniature bulbs deliver style and performance for your car or truck. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern, bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, SYLVANIA LED replacement bulbs are a simple and cost-effective way to upgrade your vehicles lighting. Also available in super bright white and an array of colors.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$79.99

SYLVANIA LED Fog Lights are built with clarity and performance in mind. Their compact design allows for a simple DIY installation, too. With SYLVANIA LED Fog Lights, you won¿t just get enhanced visibility, you¿ll also receive peace-of-mind that comes from our limited warranty.

Product Features:

COOL WHITE LIGHT: 6000K cool-white LED light for improved clarity to see what obstacles lie ahead.
DIRECT 9145 REPLACEMENT: A DIY LED upgrade for fog bulbs in cars and trucks or headlight bulbs for off-road powersports. No polarity, compact design.
LONGER LIFESPAN: Designed with efficient thermal management to extend bulb life and backed by a Limited Warranty.
LONGER LIFESPAN: Designed witháefficientáthermal management to extend bulb life and backed by a Limited Warranty.
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness, performance, and color.
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience.

from

$4.49

Long life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

Product Features:

Longer life than standard bulbs
Manufactured by trusted OEM light source supplier
Legal for on road use
Light bulbs dim over time and require replacement
Replace in pairs for optimal performance

from

$27.99

Upgrade your vehicle with SYLVANIA ZEVO LED miniature bulbs for added style, performance, and the many benefits of LEDs. Choose amber LED bulbs when replacing the turn signal and side marker lights of your vehicle for optimal visibility. Easy-to-install with a robust design and high-quality components, SYLVANIA ZEVO replacement bulbs are backed by a lifetime limited warranty to provide exceptional performance through the life of the vehicle. Also available in super bright white and an array of colors to update your car or truck.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation
SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction.
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT AMBER LIGHT: Ideal for use behind an amber lens, in side marker and turn signal bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
LIFETIME LIMITED WARRANTY: Designed with high quality components to provide exceptional performance through the lifetime of the vehicle
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$27.99

Upgrade your vehicle with SYLVANIA ZEVO LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, SYLVANIA ZEVO replacement bulbs are backed by a lifetime limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation
SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
LIFETIME LIMITED WARRANTY: Designed with high quality components to provide exceptional performance through the lifetime of the vehicle
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$21.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$58.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Economy Replacement Driver Side Fog Light Lens and Housing. It is Designed to Replace Your Existing Fog Light Lens and Housing. Check to Be Sure It Fits Your Vehicle.

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$19.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$5.29

Long life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

Product Features:

Longer life than standard bulbs
Manufactured by trusted OEM light source supplier
Legal for on road use
Light bulbs dim over time and require replacement
Replace in pairs for optimal performance

from

$22.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$10.99

The Carquest 3157 Bulb is a dual-filament automotive bulb widely used for tail lights, brake lights, and turn signals. Designed to provide both low-intensity running or parking light and high-intensity brake or turn signal functions in one bulb, it ensures optimal visibility and safety on the road. Constructed with durable tungsten filaments, the 3157 bulb resists shock, vibration, and frequent on-off cycles, delivering reliable and long-lasting performance. Compatible with standard 12V automotive electrical systems, the Carquest 3157 Bulb is a dependable choice for maintaining clear and consistent vehicle signaling.

from

$28.99

SYLVANIA SilverStar high performance halogen headlight bulbs provide a balance of improved visibility and bulb life to deliver a brighter and whiter light when compared to SYLVANIA Basic. The combination of downroad, sideroad, and whiter light helps to achieve more clarity during night-time driving. More clarity can improve contrast and object visibility such as street signs and road hazards.

Product Features:

BRIGHTER: A specially designed filament and proprietary halogen gas mixture produces a brighter downroad light
WHITER LIGHT: Blue ceramic coating technology provides a whiter light for more clarity and improved contrast, making it easier to see objects in the road
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Headlights dim over time, always replace bulbs in pairs to ensure equal brightness and color
PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
SAFETY: Compliant with DOT regulations and SAE standards, SYLVANIA headlight bulbs are designed with safety in mind to prevent glare
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$9.99

The Carquest 2825 Bulb is a high-quality automotive miniature bulb designed for use in interior lighting, instrument panels, and exterior marker lights. It provides bright, consistent illumination to enhance vehicle visibility and interior comfort. Constructed with a durable tungsten filament, the 2825 bulb resists shock, vibration, and frequent switching to ensure long-lasting performance. Compatible with standard 12V automotive electrical systems, it delivers reliable and efficient lighting suitable for various automotive applications.

Product Features:

OEM specification miniature bulb for direct replacement
Provides secure and reliable fit in automotive sockets
Bright and consistent illumination ideal for interior and marker lighting
Durable tungsten filament resists shock vibration
Compatible with standard 12V automotive electrical systems

from

$9.99

The Carquest 168 Bulb is a versatile miniature automotive bulb designed for use in instrument panels, interior lighting, license plate illumination, and side marker lights. It delivers clear, consistent brightness to improve vehicle visibility and driver awareness. Constructed with a durable tungsten filament, the 168 bulb resists shock, vibration, and frequent cycling, ensuring a long service life. Compatible with standard 12V automotive electrical systems, it provides reliable and efficient lighting for various automotive applications.

Product Features:

OEM specification miniature bulb for direct replacement
Provides secure and reliable fit in automotive sockets
Clear and consistent output ideal for instrument panel and interior lighting
Durable tungsten filament withstands shock vibration
Compatible with standard 12V automotive electrical systems

from

$13.99

Upgrade your vehicle with SYLVANIA ZEVO LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, SYLVANIA ZEVO replacement bulbs are backed by a lifetime limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation
SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
LIFETIME LIMITED WARRANTY: Designed with high quality components to provide exceptional performance through the lifetime of the vehicle
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$22.99

SYLVANIA LED miniature bulbs deliver style and performance for your car or truck. Choose red LED bulbs when replacing the tail and brake light of your vehicle for optimal visibility. Easy-to-install with a robust design and high-quality components, SYLVANIA LED replacement bulbs are a simple and cost-effective way to upgrade your vehicles lighting. Also available in super bright white and an array of colors.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT RED LIGHT: For use behind red lens, brake light replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$167.99

LED lights will make your vehicle more visible to other drivers, increasing your driving safety, and the cleaner, brighter light is much more attractive. they are also economical: they use much less power than incandescent bulbs and burn longer and cooler.

Product Features:

These Bulbs Utilize The Original Lighting Fixture and would not Damage Any Part Of Your Cars Lighting
Super Low Power Consumption
High Power LEDs
Brightest LED Bulb On The Market
Features New Flat LED Technology

from

$33.99

All lighting sockets and accessories are direct replacements for the original unit per vehicle application for ease of installation. Follow all electrical repair procedures for a quality repair where applicable.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$17.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues