from

$74.99

If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.

Product Features:

Contains all the gaskets needed to change out your camshaft
Fuel Injector O-Ring Not Included
Meets Performance Standards

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$32.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$3.29

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$445.99

Product Features:

Designed for 1500 to 6500 Performance
Maximum Power in High-RPM with Good Low-End Torque
Matched to Edelbrock Performer RPM Intakes
10 to 12 in. of Manifold Vacuum at Idle
More Lift and Duration than Most Street Camshafts
Includes Hydraulic Lifters and Assembly Lube
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection

from

$421.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$11.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$9.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$43.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$46.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$34.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
M12 X 1.50 RH Thread Size
1.7″ Underhead Length

from

$10.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$34.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$31.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$36.99

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$26.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$50.99

ToughOne ignition distributors and cam synchronizers are 100% new units. They include caps, rotors, and electronic components to ensure a bolt-off/bolt-on solution.

Product Features:

100% tested to original equipment specifications (form, fit and function).
Precision machined ground shafts assure high speed accuracy and prevent bearing failures.
Alignment positioning tool included (where applicable) to ensure proper installation.
100% tested to Original Equipment specifications (form, fit and function).
New Ignition Modules designed and manufactured to meet original equipment specifications.
Stringent sensor vane wheel manufacturing process ensures a fixed pulse width.
Durable aluminum and plastic construction.
100% New Components and fasteners eliminate premature failure.

from

$159.99

The Engine Camshaft Synchronizer is a driven device typically mounted to or into the cylinder head of a motor. The Engine Camshaft Synchronizer provides the engine control module (ECM) the precise location of the camshaft for optimal engine operation.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
OE-style brackets, hold downs, hardware, spacers and weather-tight connectors
Proper alignment, positioning and spacing for faster, easier installation
Sensor is properly sealed to prevent leaks
Sealed connections to prevent environmental corrosion and performance issues
Direct OE replacement
Global coverage for import and/or domestic applications

from

$25.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$298.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$531.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$549.99

HYDRAULIC ROLLER – Xtreme Energy Computer Controlled: Mild modifications, 3.27-3.73 gear, mass air, larger throttle body.

Product Features:

HYDRAULIC ROLLER – Xtreme Energy Computer Controlled: Mild modifications, 3.27-3.73 gear, mass air, larger throttle body.
266/274 Advertised Duration, 216/224 Duration @ .050″, .544″/.555″ Lift, 112 Lobe Separation
Valve spring upgrade required

from

$267.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$267.99

HYDRAULIC – Magnum: Broad power. 2500+ stall, low gears, 9.5:1 compression and headers. Rough idle. OR Marine: Off shore type boat. Strong performance, rough idle.

Product Features:

HYDRAULIC – Magnum: Broad power. 2500+ stall, low gears, 9.5:1 compression and headers. Rough idle. OR Marine: Off shore type boat. Strong performance, rough idle.
280/280 Advertised Duration, 230/230 Duration @ .050″, .512″/.512″ Lift, 110 Lobe Separation
Valve spring upgrade required
289-302 Firing Order