from

$3.99

Turbocharger Oil Line Gasket

from

$242.99

Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:

Eliminates the need to replace the entire turbocharger. Pre-programmed and ready to install. Supplied with O.E. grade components for durability.
Units are tested with automated computerized test equipment to ensure functionality and reliability.
On-car validation, when applicable, ensures fit, durability and performance requirements.
New product design improvements prevent typical causes of original unit failure.

from

$269.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced “Genuine” components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

from

$546.99

When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. CARDONE cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features:

Eliminates the need to replace the entire turbocharger
Allows for reuse of the original compressor and turbine housings
Direct O.E. replacement
Allows for replacement of turbocharger without the need for balancing
Supplied with O.E.-grade components for durability

from

$90.99

CARDONE Turbocharger Service Kits provide all the wear items required to remanufacture a turbocharger that has not sustained any damage to the internal components. Featuring only O.E.-grade, direct-fit components, this kit offers a great, cost-effective way to perform a turbo repair without replacing the entire assembly.

Product Features:

Kit includes all serviceable components in one package for turbochargers without internal damage
Saves money by eliminating the need to replace the complete turbocharger assembly
Allows for reuse of the center, compressor and turbine housings
Only O.E.-grade component parts or better are supplied in kit for durability
Direct O.E. replacement

from

$45.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$984.99

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$1810.99

CARDONE 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every CARDONE turbocharger has been designed and tested to guarantee O.E. fit and performance. CARDONE is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:

100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
Unit comes with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Unit comes with a pre-lube syringe to ensure product protection during installation.
Manufactured with 100% new components and tested to ensure trouble-free operation
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.

from

$1001.00

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$1177.00

Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:

100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
Unit comes with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Unit comes with a pre-lube syringe to ensure product protection during installation.
Manufactured with 100% new components and tested to ensure trouble-free operation
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$1266.00

Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:

100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
Unit comes with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Unit comes with a pre-lube syringe to ensure product protection during installation.
Manufactured with 100% new components and tested to ensure trouble-free operation
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$1458.99

CARDONE remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every CARDONE turbocharger has been designed and tested to guarantee O.E. fit and performance. CARDONE is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.