Mercedes-Benz ML350 Exhaust Parts

Essential Mercedes-Benz ML350 Exhaust Parts

Vemo – Exhaust Temperature (Part No.H1021819351VMO)

Exhaust Temperature

from

$139.90
Exhaust Temperature

Original Equipment – Exhaust Temperature (Part No.H1021849190OEA)

Exhaust Temperature

from

$98.04
Exhaust Temperature

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97263)

Exhaust Manifold Gasket Set

from

$18.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Elring – Exhaust Manifold Gasket (Part No.A8111116449ELR)

Exhaust Manifold Gasket

from

$3.57
Exhaust Manifold Gasket

HJS – Exhaust Clamp (Part No.H8020501631HJS)

Exhaust Clamp

from

$24.23
Exhaust Clamp

Dorman – Exhaust Gas Temperature Bung Repair (Part No.904-528)

Exhaust Gas Temperature Bung Repair

from

$34.99
This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe.
  • Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal.
  • Application specific – designed for a wide range of vehicle years, makes and models
  • This part has undergone vehicle try-on testing for conformance to product standards and quality
See More

Dorman – Exhaust Gas Temperature Bung Repair Kit – Female (Part No.904-533)

Exhaust Gas Temperature Bung Repair Kit - Female

from

$19.99
This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe.
  • Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal.
  • Application specific – designed for certain BMW, Chrysler, GM, Mercedes and Volkswagen model years
  • This part has undergone vehicle try-on testing for conformance to product standards and quality
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51205)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51716)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$535.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51716. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2011 Mercedes-Benz ML350 and interchanges with OE parts 164 490 19 36 and 164 490 05 14, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51717)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$650.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51717. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2011 Mercedes-Benz ML350 and interchanges with OE parts 164 490 20 36 80 and 164 490 98 36 80, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

APA/URO Parts – Exhaust Clamp (Part No.H8020501630APA)

Exhaust Clamp

from

$25.90
Exhaust Clamp

HJS – Exhaust Clamp (Part No.H8020501633HJS)

Exhaust Clamp

from

$23.03
Exhaust Clamp

HJS – Exhaust Clamp (Part No.H8020502049HJS)

Exhaust Clamp

from

$18.73
Exhaust Clamp

Original Equipment – Exhaust Backpressure (Part No.H1024571036OEA)

Exhaust Backpressure

from

$88.57
Exhaust Backpressure

Newco – Nut (Part No.4D10011131NEW)

Nut

from

$1.36
Nut

Helping You Find the Right Exhaust Parts for Your Mercedes-Benz ML350

You love your ML350. So we’ve made it easier than ever to help you find Mercedes-Benz ML350 Exhaust Parts in our online catalog. Our inventory holds 40 aftermarket and OEM Exhaust Parts for your Mercedes-Benz ML350, ranging from $1.36 to $1,253.99.

We offer parts from 12 brands trusted to make quality Exhaust Parts for your Mercedes-Benz ML350. Before you buy, take some time to read through customer reviews. We currently have 2 reviews of Mercedes-Benz ML350 Exhaust Parts from previous customers.

Find your ML350 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz ML350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Exhaust Parts Brands for Your Mercedes-Benz ML350

Our inventory holds Exhaust Parts for your Mercedes-Benz ML350 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like HJS, Dorman, and APA/URO, all of which can keep that Mercedes-Benz happy.

FAQs for Mercedes-Benz ML350 Exhaust Parts

What are the most purchased Exhaust Parts for the Mercedes-Benz ML350?

Out of 40 Exhaust Parts for the Mercedes-Benz ML350, the most popular in our inventory are:
Exhaust Clamp
from $24.23
This product is not rated
Exhaust Clamp
Catalytic Converter Clamps
Exhaust Gas Temperature Bung Repair
from $34.99
This product is not rated
Exhaust Gas Temperature Bung Repair
EGT Sensor Bung Repair Kits
Exhaust Clamp
from $25.90
This product is not rated
Exhaust Clamp
Exhaust Clamps