from

$129.99

Product Features:

Exclusively for Mercedes-Benz C-Class (W203)/ CL-Class (W215/16), CLK-Class (W208/9), CLS-Class (W219), E-Class (W210/11), GL/ML-Class (W163/64), R-Class (W251) and S-Class (W220/21)
Fits Front/Rear Right or Left
Direct fit for fast plug and play installation
Lab tested up to 1 million cycles
Arnott’s ride height sensor restores the vehicle’s ability to respond to road conditions
Increases comfort and dynamic capability for a premium ride
Replace in Pairs

from

$458.99

SK-3012 is an Arnott designed new rear shock for the right or left side of the 2003-2009 Mercedes-Benz E-Class (W211) and the 2005-2011 CLS-Class (W219) Sedan’s only – both with AIRMATIC and with ADS, incl AMG’s. The new shock bypasses the often-problematic Adaptive Damping System (ADS) and includes a coil resister which plugs in to the vehicle’s electrical system to eliminate any suspension dashboard warning lights. This completely new shock includes a new polyurethane bump stop, protective dust boot, and new top and bottom mounts. This replacement Mercedes-Benz E-Class rear shock is assembled by Arnott in the USA.

Product Features:

Converts active to passive
Custom-Valved Damper for a Great Ride
Resistor Eliminates Suspension Warning Lights
Designed & Assembled in the USA
Replace in Pairs

from

$91.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Matches Original Equipment design specifications
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

from

$1269.99

Air Strut Kit

from

$82.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to the rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Manufactured to strict engineering standards/specifications in materials and tolerances.
High corrosion resistance.
Matches original equipment design specifications

from

$229.99

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

Lifetime Warranty
Direct Replacement

from

$111.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$235.99

SK-3039 is an Arnott designed new rear shock for the 2003-2009 Mercedes-Benz E-Class (W211 Chassis) and 2005-2011 CLS-Class (W219 chassis) with or without 4MATIC and with or without rear load leveling, excluding AMG. This new shock, which fits both the left and right side, includes a custom valved and thoroughly road tested shock which provides an excellent ride. This twin tube shock includes a new polyurethane bump stop, new top and bottom mounts and a protective dust boot. The new replacement E-Class rear shock is assembled in the USA.

Product Features:

Custom Valved Damper for a Great Ride
Designed & Assembled in the USA
Replace in Pairs

from

$239.99

Air Spring

from

$439.99

Front Conversion Kit

from

$109.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$169.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$27.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$516.99

This air compressor solenoid valve unit, also known as an air compressor valve block, directly replaces the original unit on specific vehicles. It restores proper suspension performance when the original unit fails.

Product Features:

Direct replacement – this air suspension solenoid valve unit directly replaces the original compressor valve block on specific vehicles
Complete repair – essential part of a complete air suspension repair solution
Restores performance – prevents suspension sagging, excessive compressor operation and other component failures
Quality assured – part has undergone lab and materials testing to ensure quality and performance

from

$709.99

Air Spring Kit

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$17.99

Rein TechSelect Turbo Kits include all hoses, hardware and gaskets needed for the replacement of a turbocharger. All components of the kits are direct replacements to the OE, meaning hose assemblies include brackets along with heat shielding and other components, the hardware that is provided meets the same specifications as the OE and the proper sealing components are included to prevent leaks. The included components are designed and manufactured to withstand the rigorous operating environment of turbocharger systems and provide trouble-free installation.

Product Features:

TechSelect Turbo Kit for Entire Engine.
TechSelect Turbo Kits include all hoses, hardware and gaskets needed.
TechSelect Turbo Kit hoses are direct replacements to the OE, and include brackets, hardware and sealing components.

from

$239.99

Quick Strut Kit

from

$21.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$1421.00

This replacement air strut matches the fit and function of the original equipment strut on specified vehicle applications to restore ride control and prevent damage to other air suspension components.

Product Features:

Ideal replacement – this air strut replaces the original equipment strut on specified vehicle applications to restore ride quality
Durable construction – this air strut features quality rubber and metal components
Thoroughly tested – this air strut has undergone vehicle try-on and durability testing for conformance to product standards and quality
Trustworthy design – backed by team of engineers in the United States

from

$1421.00

This replacement air strut matches the fit and function of the original equipment strut on specified vehicle applications to restore ride control and prevent damage to other air suspension components.

Product Features:

Ideal replacement – this air strut replaces the original equipment strut on specified vehicle applications to restore ride quality
Durable construction – this air strut features quality rubber and metal components
Thoroughly tested – this air strut has undergone vehicle try-on and durability testing for conformance to product standards and quality
Trustworthy design – backed by team of engineers in the United States

from

$469.99

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:

Exclusively for Mercedes-Benz CLS (W219) and E-Class (W211), incl Wagons w/front air suspension
Multi-ply Goodyear air sleeve
Includes New air line fittings and new upper retaining pins
Eliminates OE reservoir
Custom-designed tapered piston for comfortable ride
NOTE: If replacing an OE unit with Arnott air spring A-2725 you MUST replace both rear air springs at the same time.

from

$369.99

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:

Exclusively for Mercedes-Benz CLS (W218) and E-Class/E AMG (W212)
Multi-ply Continental ContiTech air sleeve
Heavy-duty crimping rings
High-impact resin upper mount and bottom piston
4mm quick-connect air line fitting
Constructed to meet or exceed industry’s standards for quality, reliability and function
Replace in pairs

from

$18.49

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$34.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features: