Mercedes-Benz E550 Air Suspension and Kits

Suncore’s Air Springs are a perfect replacement for your auto leveling suspension, maintaining the smooth air ride you’ve become accustomed to. If your or bottoms out, your air springs may not be maintaining air pressure and need to be replaced quickly. If leaks are present in the air spring, the air compressor will overwork itself to try and maintain your vehicle’s height, causing it to burn out and break down. Other causes of air spring failure include overextending, which can pull the top plate away from the bellows, corrosion of the bellows often due to grease or other chemicals, and abrasions caused by rubbing against debris or another part of the vehicle. Maintaining and replacing your air springs will keep that comfortable air ride suspension lasting longer and working at its peak, leaving you and your passengers more relaxed and safe on the open road.

Suncore’s Air Springs are a perfect replacement for your auto leveling suspension, maintaining the smooth air ride you’ve become accustomed to. If your or bottoms out, your air springs may not be maintaining air pressure and need to be replaced quickly. If leaks are present in the air spring, the air compressor will overwork itself to try and maintain your vehicle’s height, causing it to burn out and break down. Other causes of air spring failure include overextending, which can pull the top plate away from the bellows, corrosion of the bellows often due to grease or other chemicals, and abrasions caused by rubbing against debris or another part of the vehicle. Maintaining and replacing your air springs will keep that comfortable air ride suspension lasting longer and working at its peak, leaving you and your passengers more relaxed and safe on the open road.

Arnott’s aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle’s chassis. The Electronic Control Unit (ECU) is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water and salt intrusion. Ride Height Sensors should be replaced to prevent further damage to the vehicle’s air suspension system.

This replacement air strut matches the fit and function of the original equipment strut on specified vehicle applications to restore ride control and prevent damage to other air suspension components.

Monroe , 40352. RIDE CONTROL>ADJUSTABLE SUSPENSION>AIR ADJUSTABLE>NATIONAL BRAND AIR SHOCKS AND STRUTS from Monroe

Fully synthetic leading edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears.

Valvoline Import Multi-Vehicle ATF is the full-synthetic automatic transmission fluid that has been specially engineered to meet and exceed the requirements of most imports and domestics with automatic transmissions. Formulated with advanced additives to prevent the major causes of transmission breakdown, it€™s designed to help prevent leaks, reduce wear and tear, and maximize performance €“ all for much longer than conventional fluids. It has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and specific frictional enhancements for smooth gear engagements. Valvoline Import Multi-Vehicle ATF is suitable for a broad range of automatic transmissions including most Toyota, Honda, Nissan, Hyundai, Kia, BMW, Volvo, VW and other import and domestic vehicles. It€™s specifically recommended for use in the following applications: BMW LT 71141 and ETL-7045E; Nissan/Infiniti Matic-D, Matic-K and Matic-J; Mitsubishi Diamond SP-II and SP-III; Subaru ATF-HP; Hyundai/Kia SP-II and SP-III; and Toyota/Lexus Type T. For the many shifts and miles ahead, trust your transmission with Valvoline, the #1 automatic transmission fluid brand.

This air compressor solenoid valve unit, also known as an air compressor valve block, directly replaces the original unit on specific vehicles. It restores proper suspension performance when the original unit fails.

This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

This new WABCO OES Air Suspension Compressor, P-2830, for the Mercedes-Benz 2010-2016 E-Class (W212 Chassis) and 2011-2018 CLS-Class (W218 Chassis) is designed to directly replace the OE compressor. This unit is made by the same manufacturer that Mercedes-Benz uses and will fit into the original factory bracket and use the OE mounting hardware. The compressor comes with a new airline, integrated air dryer and new compressor relay.

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to the rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to the rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

SK-3012 is an Arnott designed new rear shock for the right or left side of the 2003-2009 Mercedes-Benz E-Class (W211) and the 2005-2011 CLS-Class (W219) Sedan’s only – both with AIRMATIC and with ADS, incl AMG’s. The new shock bypasses the often-problematic Adaptive Damping System (ADS) and includes a coil resister which plugs in to the vehicle’s electrical system to eliminate any suspension dashboard warning lights. This completely new shock includes a new polyurethane bump stop, protective dust boot, and new top and bottom mounts. This replacement Mercedes-Benz E-Class rear shock is assembled by Arnott in the USA.

Suncore’s 124M-15 Rear Air Springs are designed as a direct OE replacement for the air springs on your 2010 to 2014 Mercedes-Benz E Class. Using the factory specific molded heavy duty plastic bottom mount, these are springs fit directly into place where the old air springs were, and function just as well, if not better. Each air spring is fully inspected and tested to ensure you receive the best component of your air suspension Suncore can manufacture.

Monroe , 40317. RIDE CONTROL>ADJUSTABLE SUSPENSION>AIR ADJUSTABLE>NATIONAL BRAND AIR SPRINGS from Monroe

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Suncore’s Air Springs are a perfect replacement for your auto leveling suspension, maintaining the smooth air ride you’ve become accustomed to. If your or bottoms out, your air springs may not be maintaining air pressure and need to be replaced quickly. If leaks are present in the air spring, the air compressor will overwork itself to try and maintain your vehicle’s height, causing it to burn out and break down. Other causes of air spring failure include overextending, which can pull the top plate away from the bellows, corrosion of the bellows often due to grease or other chemicals, and abrasions caused by rubbing against debris or another part of the vehicle. Maintaining and replacing your air springs will keep that comfortable air ride suspension lasting longer and working at its peak, leaving you and your passengers more relaxed and safe on the open road.