Mercedes-Benz E430 Exhaust Parts

Product Features:

• Show Quality Chrome Platinum
• Durable Black Finish
• Can Be Welded Or Clamped
• Complete The System
• Glass-Packed Resonators

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Contains all gaskets and seals to remove and replace exhaust manifold

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 451205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Durable 308 stainless steel MIG welds

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24402. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1998-2003 Mercedes-Benz E320 4Matic 3.2L & 2000-2002 Mercedes-Benz E430 4Matic 4.3L. MagnaFlow 24402 includes (1) Torca Clamp and interchanges with OE parts 210 490 07 47, 210 490 07 47 80, 210 490 18 47, 210 490 18 47 80, 210 490 34 20, 210 490 34 20 80, 210 490 59 19, 210 490 59 19 80, 211 490 08 19, 211 490 08 19 05, 211 490 08 19 80. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Simplifies installation with essential gaskets and hardware being included in the box
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 441027. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 441027 interchanges with OE parts 3D0 254 400 NX, 3D0 254 400 RX. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Durable 308 stainless steel MIG welds
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 444505. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 451206. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 444314. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 444314 includes (1) Torca Clamp and interchanges with OE parts 220 490 06 20, 220 490 06 20 05, 220 490 06 20 27, 220 490 06 20 80, 220 490 14 19, 220 490 14 19 27. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Compact, lightweight construction enables installation in confined areas, welding is required

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 444304. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999 Mercedes-Benz E430 4.3L. MagnaFlow 444304 includes (1) Torca Clamp and interchanges with OE parts 210 490 82 20, 210 490 82 20 27, 210 490 82 20 80. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99305HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Durable 308 stainless steel MIG welds
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 454305. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 441205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 444205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Durable 308 stainless steel MIG welds
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 454032. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2002 Mercedes-Benz E430 Base 4.3L. MagnaFlow 454032 includes (1) Torca Clamp and interchanges with OE parts 210 490 82 20, 210 490 82 20 27, 210 490 82 20 80. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 454038. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2002 Mercedes-Benz E430 Base 4.3L. MagnaFlow 454038 includes (2) Flat Washers, (2) Bolts, (2) Nuts, (1) Torca Clamp and interchanges with OE parts 210 490 83 20, 210 490 83 20 27, 210 490 83 20 80. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty