Mercedes-Benz C63 AMG Brake Parts

Essential Mercedes-Benz C63 AMG Brake Parts

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA620060)

Brake Hydraulic Hose

from

$33.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable & long-lasting repair.

Product Features:
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Premium – Disc Brake Pad Wear Sensor (Part No.WSA3189)

Disc Brake Pad Wear Sensor

from

$24.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-6210)

Vacuum Brake Booster: Without Master Cylinder

from

$299.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8235A)

Disc Brake Caliper Guide Pin Boot Kit

from

$6.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Maintains proper movement for safe, effective stopping performance
  • Prevents noise and premature wear
See More

ATE – Brake Master Cylinder (Part No.N3000472768ATE)

Brake Master Cylinder

from

$264.39
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Febi – Bilstein Brake Disc Set Screw (Part No.N1004140486FEB)

Bilstein Brake Disc Set Screw

from

$3.01
The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000334191ZIC)

Coat-Z Brake Disc (Rotor)

from

$179.29
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Pilenga – Coated High Carbon Brake Disc (Rotor) (Part No.N1000307648PIC)

Coated High Carbon Brake Disc (Rotor)

from

$106.95
Pilenga Brake Discs, 100% Made in Italy The Pilenga coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. Pilenga manufactures OE-Quality Brake Discs that assures maximum performance and enhanced driving comfort, providing the same levels of quality, technology and performance that are found in many of the OEM fitments. With enhanced thermal inertia, Pilenga High Carbon discs reduce both vibration and noise. Pilenga’s meticulously controlled production process makes it possible to precisely contrast the chemical composition of the cast iron, maximizing the percentage of carbon in the discs.

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Excellent braking performance.
  • Attractive appearance (strong visual impact combined with alloy wheels)
  • Eco-Friendly long lasting corrosion resistance
  • High carbon content
  • No reduction in friction coefficient with Pilenga coated brake discs
See More

Carquest Wearever – Parking Brake Hardware Kit (Part No.17442)

Parking Brake Hardware Kit

from

$46.99
Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:
  • Contains all the necessary hardware for easy installation
  • Direct replacement for a perfect fit, form and function
  • Corrosion resistant for long-lasting durability against harsh roads
  • Manufactured with quality materials to restrain high tolerances
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH277177)

Disc Brake Rotor Meets or Exceeds OE Design

from

$150.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Brembo – OE Replacement Brake Disc (Rotor) (Part No.N1000234081BRE)

OE Replacement Brake Disc (Rotor)

from

$1175.88
The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Made of special cast iron with high carbon content
  • Pillar Venting Technology (Vented Rotors Only)
  • Easy Check wear indicator system
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
See More

Zimmermann – Formula-Z High Carbon Coat-Z Brake Disc (Rotor) (Part No.N1000404957ZFZ)

Formula-Z High Carbon Coat-Z Brake Disc (Rotor)

from

$1053.03
The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load. The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimized chassis structures. COAT-Z – Coat-Z is a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Formula Z – Bake Disc – The composite or compound brake disc named Formula Z is suitable for motorsport applications due to its special design. In contrast to the fully cast-iron brake disc, the friction ring (cast iron) and hub (aluminum alloy) are connected by steel pins. The resulting, floating construction reduces the thermal buffering of the friction ring in the operating temperature state substantially, because the friction ring can freely expand under thermal stress (e.g. when braking from high speeds or several consecutive brake applications). The use of aluminium alloy also considerably reduces the unsprung masses on the vehicle. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-1291)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$61.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

TRW – Brake Pad Set (Part No.N10101615026TRW)

Brake Pad Set

from

$206.99
The TRW Premium brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • Include the OE specified shims.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic blended compound.
See More

Carquest Premium Gold – Brake Pads: Ceramic, Long Life and Quiet (Part No.GNAD1291)

Brake Pads: Ceramic, Long Life and Quiet

from

$55.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet, Less Dust (Part No.PXD1424H)

Brake Pads: With Hardware, Ceramic, Better Performance, Quiet, Less Dust

from

$70.99
Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:
  • Industry-leading number of application specific formulations for maximum performance and extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • Burnishing compound allows for a faster break-in of pads and rotors
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Wear sensors included on most European applications that require replacement
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium Gold – Brake Pads: With Hardware, Ceramic, Long Life and Quiet (Part No.GNAD986)

Brake Pads: With Hardware, Ceramic, Long Life and Quiet

from

$59.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-1681)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$43.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

ATE – Parking Brake Cable (Part No.N5010470032ATE)

Parking Brake Cable

from

$64.19
Parking Brake Cable

Febi – Parking Brake Cable (Part No.N5010470074FEB)

Parking Brake Cable

from

$30.46
Parking Brake Cable

Carquest Wearever – Parking Brake Shoes (Part No.S969)

Parking Brake Shoes

from

$32.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Parking Brake Shoes (Part No.S950)

Parking Brake Shoes

from

$30.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Helping You Find the Right Brake Parts for Your Mercedes-Benz C63 AMG

You love your C63 AMG. So we’ve made it easier than ever to help you find Mercedes-Benz C63 AMG Brake Parts in our online catalog. Our inventory holds 52 aftermarket and OEM Brake Parts for your Mercedes-Benz C63 AMG, ranging from $3.01 to $1,175.88.

We offer parts from 17 brands trusted to make quality Brake Parts for your Mercedes-Benz C63 AMG. Before you buy, take some time to read through customer reviews. We currently have 431 reviews of Mercedes-Benz C63 AMG Brake Parts from previous customers.

Find your C63 AMG Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz C63 AMG part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Brake Parts Brands for Your Mercedes-Benz C63 AMG

Our inventory holds Brake Parts for your Mercedes-Benz C63 AMG from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Carquest Professional, and Carquest Premium, all of which can keep that Mercedes-Benz happy.
We have Autopart International Inc parts available for your Mercedes-Benz C63 AMG in categories like Brake Pads and Shoes. Some of the top-rated Autopart International Inc parts in these categories are:
Brake Pad Set
from $48.96
(1)
Brake Pad Set
Rear Brake Pads and Shoes

Top-Rated Carquest Wearever Brake Parts

Leading Carquest Wearever Brake Parts

We carry Carquest Wearever brand parts for your Mercedes-Benz C63 AMG across several catalog categories, including Brake Pads and Shoes and Brake Kits. Some of our most reviewed Carquest Wearever parts include:
Brake Pad Wear Sensor
from $9.49
(48)
Brake Pad Wear Sensor
Brake Wear Sensors
Disc Brake Caliper Guide Pin Boot Kit
from $6.49
(20)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits
Brake Pad Wear Sensor
from $24.99
(1)
Brake Pad Wear Sensor
Brake Wear Sensors

FAQs for Mercedes-Benz C63 AMG Brake Parts

What are the most purchased Brake Parts for the Mercedes-Benz C63 AMG?

Out of 52 Brake Parts for the Mercedes-Benz C63 AMG, the most popular in our inventory are:
Brake Pads: With Hardware, Ceramic, Long Life and Quiet
from $59.99
(18)
Brake Pads: With Hardware, Ceramic, Long Life and Quiet
Rear Brake Pads and Shoes
Brake Pads: Reliable and Dependable Stopping
from $43.99
This product is not rated
Brake Pads: Reliable and Dependable Stopping
Rear Brake Pads and Shoes