Mercedes-Benz C250 Cooling and Climate Controls

Essential Mercedes-Benz C250 Cooling and Climate Controls

Behr – A/C Compressor w/ Clutch, New (Part No.R1000440592BEH)

A/C Compressor w/ Clutch, New

from

$1085.06
Behr manufactures a 100% new A/C Compressor with clutch assembly, that is the same quality fit and performance of the OE compressor it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Brand new with no remanufactured parts
  • Equipped with a new clutch assembly
  • OEM supplier to many European vehicle manufacturers
See More

ACM – A/C Condenser (Part No.R1030401132ACM)

A/C Condenser

from

$304.04
The ACM A/C Condenser is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meet or exceed OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Compatible with R12 and R134a refrigerant.
  • Applicable gaskets and O-rings supplied with each part.
See More

Carquest Premium – New Auxiliary Water Pump (Part No.T1380)

New Auxiliary Water Pump

from

$252.99
This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:
  • Electric water pump
  • Specialized for vehicles using supplemented cooling for the engine or components
  • Plastic housing
  • All components necessary for installation are supplied with pump
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1887)

HVAC Blower Motor Resistor

from

$449.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Dorman – Thermostat Assembly: Includes Housing, Gasket, and Sensors, 217 Degrees (Part No.902-5177)

Thermostat Assembly: Includes Housing, Gasket, and Sensors, 217 Degrees

from

$236.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Carquest Premium – A/C New, with Clutch, with 6SEU16C Compressor (Part No.T198379)

A/C New, with Clutch, with 6SEU16C Compressor

from

$409.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Nissens – Radiator (Part No.G1000478932NSS)

Radiator

from

$297.87
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style mounting brackets and hose connections.
  • Integrated transmission oil cooler when applicable.
  • Compact and lightweight.
See More

Febi – Rivet (Part No.Q20011324407FEB)

Rivet

from

$2.02
Rivet

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2004)

A/C Refrigerant Pressure Sensor

from

$41.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

KAI – Radiator Support Tie Bar (Part No.MB1225148)

Radiator Support Tie Bar

from

$20.99
New Standard Replacement Radiator Support Upper Tie Bar, Coupe And Sedan, Made Of High Strength Steel

Product Features:
  • Coupe And Sedan, Made Of High Strength Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Radiator Fan Assembly: Single, With Controller, Cost Effective And Reliable (Part No.621-373)

Radiator Fan Assembly: Single, With Controller, Cost Effective And Reliable

from

$513.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

ATE – ATE ABS Speed Sensor (Part No.N6030319923ATE)

ATE ABS Speed Sensor

from

$81.48
The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

ACM – ACM A/C Expansion Valve (Part No.R1045399354ACM)

ACM A/C Expansion Valve

from

$66.87
The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meet or exceed OEM specifications.
  • Utilizes the factory style fittings and connectors
  • Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
See More

Behr – Blower Motor (Part No.R2031451452BEH)

Blower Motor

from

$317.86
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:
  • OEM Quality.
  • Direct Fit Replacement.
  • Highly efficient
  • Quiet-running
  • Meets or exceeds OE design and performance.
See More

APA/URO Parts – Coolant Crossover Pi (Part No.G20521617256APA)

Coolant Crossover Pi

from

$95.84
Coolant Crossover Pi

Dorman – Auxiliary Coolant Pump (Part No.902-065)

Auxiliary Coolant Pump

from

$193.99
This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
  • Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Febi – Radiator Hose O-Ring (Part No.G2004452902FEB)

Radiator Hose O-Ring

from

$3.29
Radiator Hose O-Ring

Behr – Behr Expansion Tank (Part No.G1030461987BEH)

Behr Expansion Tank

from

$54.53
The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Rein – Cap-Expansion Tank (Part No.CPE0029P)

Cap-Expansion Tank

from

$29.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Santech – A/C Schrader Valve C (Part No.R1138570551SII)

A/C Schrader Valve C

from

$8.05
A/C Schrader Valve C

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83063)

A/C Desiccant Bag Kit

from

$25.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Helping You Find the Right Cooling and Climate Controls for Your Mercedes-Benz C250

You love your C250. So we’ve made it easier than ever to help you find Mercedes-Benz C250 Cooling and Climate Controls in our online catalog. Our inventory holds 71 aftermarket and OEM Cooling and Climate Controls for your Mercedes-Benz C250, ranging from $1.61 to $1,085.06.

We offer parts from 25 brands trusted to make quality Cooling and Climate Controls for your Mercedes-Benz C250. Before you buy, take some time to read through customer reviews. We currently have 2,983 reviews of Mercedes-Benz C250 Cooling and Climate Controls from previous customers. Some of the top rated parts include Blower Motor: With Wheel with 3.0 stars and A/C New, with Clutch, with 7SEU16C Compressor with 5.0 stars.

Find your C250 Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz C250 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Mercedes-Benz C250

Our inventory holds Cooling and Climate Controls for your Mercedes-Benz C250 from 25 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Carquest Premium, and Motorad, all of which can keep that Mercedes-Benz happy.

FAQs for Mercedes-Benz C250 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Mercedes-Benz C250?

Out of 71 Cooling and Climate Controls for the Mercedes-Benz C250, the most popular in our inventory are:
Engine Coolant Reservoir Cap
from $19.79
(1)
Engine Coolant Reservoir Cap
Coolant Reservoir Caps
Integrated Thermostat Housing: With Sensor, With Seal, 217 Degrees
from $188.99
This product is not rated
Integrated Thermostat Housing: With Sensor, With Seal, 217 Degrees
Thermostat and Water Outlet Assemblies
Coolant Temperature Sensor with O-Ring and Install Clip
from $19.99
This product is not rated
Coolant Temperature Sensor with O-Ring and Install Clip
Coolant Temperature Sensors

What are the top-rated Mercedes-Benz C250 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Mercedes-Benz C250 based on customer reviews/ratings are:
Blower Motor: With Wheel
from $116.99
(2)
Blower Motor: With Wheel
“Works great, Dee & Kevin were very helpful”
A/C New, with Clutch, with 7SEU16C Compressor
from $571.99
(1)
A/C New, with Clutch, with 7SEU16C Compressor
“Works great no issues in the first 3 weeks since it was installed.”