Mercedes-Benz 280SE Brake Parts

Essential Mercedes-Benz 280SE Brake Parts

ATE – Brake Pad Pin Kit (Part No.N106225691ATE)

Brake Pad Pin Kit

from

$14.19
This is a brake hardware kit consisting of (4) 000 991 03 60 brake pins and (2) 000 421 02 91 anti-rattle spring. The ATE Brake Pad Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Cardone New – Vacuum Brake Booster: Without Master Cylinder (Part No.5C-35936)

Vacuum Brake Booster: Without Master Cylinder

from

$239.99
CARDONE New Vacuum Brake Boosters, Hydro-Vac Boosters, and Hydraulic Boosters are back by CARDONE New Engineering. CARDONE New Engineering is based off 40 years of CARDONE engineering expertise, where original design weaknesses are identified, corrected and where applicable upgraded to provide a more durable part then the original unit. Every unit is 100% new and manufactured to meet or exceed OEM performance, providing a quality product both you and your vehicle rely on.

Product Features:
  • A premium finish is applied on every unit for superior corrosion protection.
  • Each unit is 100% vacuum and pressure tested to ensure reliable performance.
  • Pedal rods are 100% functionally tested to ensure proper operation.
  • Guaranteed fit and function.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M. performance.
See More

ATE – Brake Reservoir (Part No.N301011992ATE)

Brake Reservoir

from

$279.27
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers. Some models require fluid level sensor modification when installed on early model vehicles still using prior versions of master cylinders.
See More

ATE – Brake Caliper Repair Kit (Part No.N1050389941ATE)

Brake Caliper Repair Kit

from

$28.30
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000939223ZIC)

Coat-Z Brake Disc (Rotor)

from

$62.04
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

ATE – Booster Check Valve (Part No.N4030459144ATE)

Booster Check Valve

from

$43.33
Booster Check Valve

ATE – Original OE Formuld Brake Pad Set (Part No.N101025379ATE)

Original OE Formuld Brake Pad Set

from

$29.74
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:
  • OE engineered brake system technology assures optimum fit and performance
  • Advanced friction vehicle specific formulations
  • Reduced dusting and extend pad life
  • Application matched premium quality friction grade
  • Underlayer design helps reduce noise, vibration and harshness
  • Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
See More

Akebono – EURO Ceramic Ultra-Premium Brake Pads (Part No.N1010186474AKE)

EURO Ceramic Ultra-Premium Brake Pads

from

$79.10
Akebono EURO® Ultra-Premium ceramic brake pads provide exactly the ideal vehicle control and performance response intended by the manufacturers of European makes. Maintain the enhanced pedal feel of European braking performance with brake pads and friction formulas engineered specifically for your vehicle and manufactured in the USA. Brake Pads That Ensure Optimal Responsiveness and Cleaner Wheels European car owners across North America now have a brake pad solution that will keep their wheels virtually free from dust and provide the European stopping power they expect. The use of our exclusive, highly advanced ceramic brake pad technology means that Akebono’s EURO Ultra-Premium brake pads provide excellent stopping power while extending rotor life and virtually eliminating brake dust, so the wheels on your European vehicle will remain their cleanest. In addition, Akebono EURO Ultra-Premium ceramic brake pads control noise, vibration, and harshness (NVH) and help ensure longer rotor life. They are the ultimate upgrade for semi-metallic and low-metallic brake pads. Akebono: The Industry Standard for European Manufacturers For over two decades, Akebono Ceramic Technology® (ACT) has been standard on many of North America’s passenger cars, light trucks, and SUVs and has set the benchmark for ceramic pads used in OE vehicle production. Now European manufacturers request Akebono brake products, and we can deliver that level of reliability to your replacement brake pads. Akebono manufactures replacement disc pads that contain the same materials, engineering, quality standards, and advanced technologies used to create our original ceramic brake pads. The use of Akebono ceramic brake pads ensures customer satisfaction and eliminates unnecessary return visits to the shop.

Product Features:
  • Ultimate upgrade for OE semi-metallic, organic and low-metallic brake pads
  • Ultra-Quiet – controls noise, vibration and harshness level
  • European braking performance with enhanced pedal feel
  • Extremely rotor friendly for longer rotor life
  • Friction formulas specially designed for European vehicles
See More

MTC – Brake Pad Shim (Part No.N102017259MTC)

Brake Pad Shim

from

$2.33
Platform specific rubber to metal composite material designed to solve noise and vibration problems. MTC rubber to metal composite materials for noise damping in disc brakes combine a number of valuable Features and Benefits: vibration insulation, compressibility and excellent adhesion. The rubber composite materials are excellent for applications with demanding insulation for vibration and noise. The materials retain their integrity even when subjected to high pressure and high temperature. MTC brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:
  • Platform Specific Design
  • Combats Brake Squeal
  • OE-Style Composite Core Shim
  • Effective Thermal Barrier
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380009)

Brake Hose Assembly: Copper Washers Included

from

$18.79
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104011989ATE)

Original Brake Caliper, New - Friction Ready

from

$561.81
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Febi – Parking Brake Shoe Spring (Part No.N500272009FEB)

Parking Brake Shoe Spring

from

$1.60
Parking Brake Shoe Spring

ATE – ATE Brake Master Cylinder (Part No.N300012209ATE)

ATE Brake Master Cylinder

from

$475.88
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

ATE – Brake Master Cylinde (Part No.N30003129334ATE)

Brake Master Cylinde

from

$348.11
Brake Master Cylinde

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000939220ZIC)

Coat-Z Brake Disc (Rotor)

from

$61.69
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100015502ZIC)

Coat-Z Brake Disc (Rotor)

from

$82.00
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

ATE Premium One – Brake M/C Reservoir (Part No.N301711738ATE)

Brake M/C Reservoir

from

$8.75
Brake M/C Reservoir

Bowa – Brake Pad Wear Sensor (Part No.N103026105BOW)

Brake Pad Wear Sensor

from

$2.39
Bowa electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at Bowa make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Highly Durable and Resistant to Temperatures
  • Supplied with OE style electrical connectors
  • Bowa is an OE supplier to Brake and Vehicle Manufacturers
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1086)

Brake Pad Wear Sensor

from

$16.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N1040939827ATE)

Original Brake Caliper, New - Friction Ready

from

$682.99
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104016086ATE)

Original Brake Caliper, New - Friction Ready

from

$572.83
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Autopart International Inc – Brake Caliper (Part No.N10401922347API)

Brake Caliper

from

$110.66
Brake Caliper

Febi – Exhaust Nut (Part No.H100111133FEB)

Exhaust Nut

from

$2.02
Exhaust Nut

Helping You Find the Right Brake Parts for Your Mercedes-Benz 280SE

You love your 280SE. So we’ve made it easier than ever to help you find Mercedes-Benz 280SE Brake Parts in our online catalog. Our inventory holds 50 aftermarket and OEM Brake Parts for your Mercedes-Benz 280SE, ranging from $1.60 to $688.49.

We offer parts from 19 brands trusted to make quality Brake Parts for your Mercedes-Benz 280SE. Before you buy, take some time to read through customer reviews. We currently have 434 reviews of Mercedes-Benz 280SE Brake Parts from previous customers. Some of the top rated parts include Semi Loaded Disc Brake Caliper with 5.0 stars and ATE Brake Master Cylinder with 5.0 stars.

Find your 280SE Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz 280SE part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Brake Parts Brands for Your Mercedes-Benz 280SE

Our inventory holds Brake Parts for your Mercedes-Benz 280SE from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Carquest Premium, and ATE, all of which can keep that Mercedes-Benz happy.

FAQs for Mercedes-Benz 280SE Brake Parts

What are the most purchased Brake Parts for the Mercedes-Benz 280SE?

Out of 50 Brake Parts for the Mercedes-Benz 280SE, the most popular in our inventory are:
Brake Pads: Ceramic, Long Life and Quiet
from $43.99
(20)
Brake Pads: Ceramic, Long Life and Quiet
Front Brake Pads and Shoes
Exhaust Nut
from $2.02
This product is not rated
Exhaust Nut
Brake Master Cylinder Nut
Coat-Z Brake Disc (Rotor)
from $62.04
This product is not rated
Coat-Z Brake Disc (Rotor)
Rear Brake Rotors

What are the top-rated Mercedes-Benz 280SE Brake Parts?

Top-rated Brake Parts for your Mercedes-Benz 280SE based on customer reviews/ratings are:
Semi Loaded Disc Brake Caliper
from $67.99
(1)
Semi Loaded Disc Brake Caliper
“I WAS ONLY GOING TO CHANGE RIGHT BRAKE CALIPER, BUT HAD TO DO LEFT AS WELL.”
ATE Brake Master Cylinder
from $475.88
(1)
ATE Brake Master Cylinder
“Perfect fit on 2008 Hyundai Santa Fe”
Original Brake Caliper, New - Friction Ready
from $561.81
(1)
Original Brake Caliper, New – Friction Ready
“Might be great plugs, but not so much in a GM 3.4 V6 Rough idle and early fouling.”